Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Cogging Torque Reduction Technique on E-Core Hybrid Flux Switching Motor by Notching and Pole Pairing

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 2 (2018) · hlm. 839–847

DOI
10.11591/ijpeds.v9.i2.pp839-847
ISSN
2722-256X, 2088-8694
Terbit
2018-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In the past, 4S-10P E-Core Hybrid Flux Switching Motor (HFSM) had been studied. However, the motor suffers high cogging torque but it has high performance in terms of high power and high torque at high speed. Therefore, this paper is proposing the cogging torque reduction techniques to minimize the cogging torque. The high cogging torque gave an undesirable effect during low operating speed of the motor. In order to tackle the issue, the cogging torque mechanism in equation is laid out as a form of reference. Then the reduction techniques employed on the designs and analyzed with Finite Element analysis (FEA) in JMAG. The results show the cogging torque of the optimized design is 44.45% of the motor torque. Besides, the techniques employed to identify which techniques gave the most cogging torque reduction and analyzed the geometrical difference using the cogging torque mechanism. Finally, the analysis is discussed based on the modified geometrics.

Jaringan kolaborasi para penulis

29 penulis · 101 tautan kepenulisan bersama · 17 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • Universiti Teknikal Malaysia Melaka
  • Taylor's University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Enwelum I. MbadiweTun Hussein Onn University of Malaysia5
Mahyuzie JenalTun Hussein Onn University of Malaysia4
Siti Khalidah RahimiTun Hussein Onn University of Malaysia4
Laili Iwani JusohTun Hussein Onn University of Malaysia3
Fatihah Shafiqah BahrimTun Hussein Onn University of Malaysia3
Mohd Firdaus Mohd Ab HalimUniversiti Teknikal Malaysia Melaka2
Zarafi AhmadTun Hussein Onn University of Malaysia2
Rajesh KumarTun Hussein Onn University of Malaysia2
E. SulaimanAfiliasi tidak diketahui2
Raja Nor Firdaus Kashfi Raja OthmanUniversiti Teknikal Malaysia Melaka2
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia2
Zarafi Md. AhmadTun Hussein Onn University of Malaysia2
Syed Muhammad Naufal Syed OthmanTun Hussein Onn University of Malaysia1
J.A. RahimTun Hussein Onn University of Malaysia1
Hassan AliTun Hussein Onn University of Malaysia1
Irfan AliTun Hussein Onn University of Malaysia1
Mohd FirdausUniversiti Teknikal Malaysia Melaka1
Gadafi M RomalanTun Hussein Onn University of Malaysia1
Nor Aishah Md ZukiUniversiti Teknikal Malaysia Melaka1
Fairul Azhar Abdul ShukorUniversiti Teknikal Malaysia Melaka1
Muhamad Ariff KhalidUniversiti Teknikal Malaysia Melaka1
Nazri OthmanUniversiti Teknikal Malaysia Melaka1
Azhan Ab RahmanUniversiti Teknikal Malaysia Melaka1
Muhammad Sharil YahayaUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Cogging Torque Reduction Technique on E-Core Hybrid Flux Switching Motor by Notching and Pole Pairing</dc:title>
	<dc:creator>Abd Rani, Jaudah</dc:creator>
	<dc:creator>Sulaiman, Erwan</dc:creator>
	<dc:creator>Ahmad, Md Zarafi</dc:creator>
	<dc:creator>Omar, Mohd Fairoz</dc:creator>
	<dc:creator>Vaithilingam, Chockalingam Aravind</dc:creator>
	<dc:description xml:lang="en-US">In the past, 4S-10P E-Core Hybrid Flux Switching Motor (HFSM) had been studied. However, the motor suffers high cogging torque but it has high performance in terms of high power and high torque at high speed. Therefore, this paper is proposing the cogging torque reduction techniques to minimize the cogging torque. The high cogging torque gave an undesirable effect during low operating speed of the motor. In order to tackle the issue, the cogging torque mechanism in equation is laid out as a form of reference. Then the reduction techniques employed on the designs and analyzed with Finite Element analysis (FEA) in JMAG. The results show the cogging torque of the optimized design is 44.45% of the motor torque. Besides, the techniques employed to identify which techniques gave the most cogging torque reduction and analyzed the geometrical difference using the cogging torque mechanism. Finally, the analysis is discussed based on the modified geometrics.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11783</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i2.pp839-847</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 2: June 2018; 839-847</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11783/11243</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Jaudah Abd Rani, Erwan Sulaiman, Md Zarafi Ahmad, Mohd Fairoz Omar, Chockalingam Aravind Vaithilingam</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>