Akses terbuka
Jurnal
SINTA 1
Switch mode power supply with flyback LED driver topology in public lighting systems energy supply
International Journal of Power Electronics and Drive Systems · Vol. 14 No. 4 (2023) · hlm. 2328–2337
ISSN 2722-256X, 2088-8694
Terbit 2023-12-01
Penerbit Institute of Advanced Engineering and Science
Bahasa eng
Abstrak
This research aims to design a flyback topology switch-mode power supply constant voltage and constant current light emitting diode (LED) driver to improve the performance of the LED. The flyback topology is chosen for its simple design and small size and uses high-frequency switching to lower the high DC voltage from the power source. The research aims to avoid blackouts caused by a drop in the power source voltage and to produce technological products that can be developed for other lighting applications. The constant-voltage feedback system ensures that the current flowing to the LED remains stable despite changes in load or other conditions. When there is a voltage drop from the power source, this topology can maintain the voltage and current stable and in accordance with the working voltage specifications of the LEDs. According to test results, the LED driver's output voltage ranges from 18.03 to 18.06 volts with an average message error value of 0.3%. In this system, switching occurs at frequencies ranging from 18.041 Hz to 38.230 Hz. With a constant current value of 0.58 ampere, the resulting lamp's lux value is stable and does not significantly change.
Jaringan kolaborasi para penulis
22 penulis ·
47 tautan kepenulisan bersama
· 25 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Diponegoro University Universitas Jember Tun Hussein Onn University of Malaysia Universiti Teknologi MARA Universitas Muhammadiyah Surabaya State University of Semarang Universitas Widya Gama Malang Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Switch mode power supply with flyback LED driver topology in public lighting systems energy supply</dc:title>
<dc:creator>Widjonarko, Widjonarko</dc:creator>
<dc:creator>Hardianto, Triwahju</dc:creator>
<dc:creator>Akmal, Ahmad Ishamul Ayady</dc:creator>
<dc:creator>Ate, Abdelrahim Ahmed Mohammed</dc:creator>
<dc:subject xml:lang="en-US">constant current; constant voltage; flyback; high-frequency switching; street lighting system; switch mode power supply LED driver</dc:subject>
<dc:description xml:lang="en-US">This research aims to design a flyback topology switch-mode power supply constant voltage and constant current light emitting diode (LED) driver to improve the performance of the LED. The flyback topology is chosen for its simple design and small size and uses high-frequency switching to lower the high DC voltage from the power source. The research aims to avoid blackouts caused by a drop in the power source voltage and to produce technological products that can be developed for other lighting applications. The constant-voltage feedback system ensures that the current flowing to the LED remains stable despite changes in load or other conditions. When there is a voltage drop from the power source, this topology can maintain the voltage and current stable and in accordance with the working voltage specifications of the LEDs. According to test results, the LED driver's output voltage ranges from 18.03 to 18.06 volts with an average message error value of 0.3%. In this system, switching occurs at frequencies ranging from 18.041 Hz to 38.230 Hz. With a constant current value of 0.58 ampere, the resulting lamp's lux value is stable and does not significantly change.</dc:description>
<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
<dc:contributor xml:lang="en-US"></dc:contributor>
<dc:date>2023-12-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22607</dc:identifier>
<dc:identifier>10.11591/ijpeds.v14.i4.pp2328-2337</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 4: December 2023; 2328-2337</dc:source>
<dc:source>2722-256X</dc:source>
<dc:source>2088-8694</dc:source>
<dc:source>10.11591/ijpeds.v14.i4</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22607/14363</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2023 Widjonarko Widjonarko, Triwahju Hardianto, Ahmad Ishamul Ayady Akmal, Abdelrahim Ahmed Mohammed Ate</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Widjonarko, W., Hardianto, T., Akmal, A. I. A., & Ate, A. A. M. (2023). Switch mode power supply with flyback LED driver topology in public lighting systems energy supply. International Journal of Power Electronics and Drive Systems, 14(4), 2328–2337. https://doi.org/10.11591/ijpeds.v14.i4.pp2328-2337
Salin
IEEE
W. Widjonarko, T. Hardianto, A. I. A. Akmal, and A. A. M. Ate, “Switch mode power supply with flyback LED driver topology in public lighting systems energy supply,” International Journal of Power Electronics and Drive Systems, vol. 14, no. 4, pp. 2328–2337, 2023, doi: 10.11591/ijpeds.v14.i4.pp2328-2337.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.