Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Torgue and flux ripple mitigation technique using multi-level inverter for sequential model predictive controlled induction motor

International Journal of Power Electronics and Drive Systems · Vol. 16 No. 1 (2025) · hlm. 287–297

DOI
10.11591/ijpeds.v16.i1.pp287-297
ISSN
2722-256X, 2088-8694
Terbit
2025-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The control of electric motors presents a fascinating topic in the field of electrical engineering. Three-phase induction motors are extensively employed in industrial applications, because of their durability and cost-effectiveness. Hence, induction motor control research remains a major priority in electrical drive technology. Field-oriented control (FOC) and direct torque control (DTC) are the most common control methods for industrial applications up to now. Recently developed microcontroller processing capabilities have enabled novel control technology like model predictive control (MPC). High-performance drive systems could benefit from this new control method. One of MPC approach, referred to as finite control set-model predictive control (FCS-MPC), focuses on reducing a single cost function. This is achieved by adjusting a weighting factor to prioritize either torque or flux error reduction. However, the primary drawbacks of the standard FCS-MPC lie in determining these weighting factors and the variable switching frequency, which greatly varies based on the operational conditions. A control approach that eliminated the weighing factor was proposed. The proposed sequential model predictive control (SMPC) method is applied to a 3-phase induction motor operated by a 5-level CHB inverter. Simulation results matched theoretical analysis. Results demonstrated that stator flux and torque are independently controlled without weighting factor, and low harmonic distortion levels.

Kata kunci

Jaringan kolaborasi para penulis

30 penulis · 126 tautan kepenulisan bersama · 39 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Technology Malaysia
  • Aligarh Muslim University
  • Universitas Ahmad Dahlan
  • University of Maiduguri
  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tole SutiknoUniversitas Ahmad Dahlan7
Nik Rumzi Nik IdrisUniversity of Technology Malaysia7
Razman AyopUniversity of Technology Malaysia6
Shahrin Md AyobUniversity of Technology Malaysia4
M. Saad Bin ArifAligarh Muslim University3
Hazlina SelamatUniversity of Technology Malaysia3
Mohd Zaki DaudUniversity of Technology Malaysia2
Chee Wei TanUniversity of Technology Malaysia2
Naziha Ahmad AzliUniversity of Technology Malaysia2
Ibrahim Mohd AlsofyaniUniversity of Technology Malaysia2
Aree WangsupphapholUniversity of Technology Malaysia2
Y.A. AlamriUniversity of Technology Malaysia2
Yusra WahabAligarh Muslim University1
Md Ashraf Ali KhanAligarh Muslim University1
Kuber KuberAligarh Muslim University1
Awang JusohUniversity of Technology Malaysia1
S. KakarUniversity of Technology Malaysia1
Nik Din MuhamadUniversity of Technology Malaysia1
Saifullah KakarUniversity of Technology Malaysia1
Z. DaudAfiliasi tidak diketahui1
Kwan Yiew LauUniversity of Technology Malaysia1
Abba Lawan BukarUniversity of Maiduguri1
Syed Norazizul Syed NasirUniversity of Technology Malaysia1
Izni MustafarUniversity of Technology Malaysia1
Nur Huda RamlanUniversiti Malaysia Pahang Al-Sultan Abdullah1
Rozana AlikUniversity of Technology Malaysia1
Jasrul Jamani JamianUniversity of Technology Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Torgue and flux ripple mitigation technique using multi-level inverter for sequential model predictive controlled induction motor</dc:title>
	<dc:creator>Abobaker, Abobaker Kikki</dc:creator>
	<dc:creator>Nordin, Norjulia Mohamad</dc:creator>
	<dc:creator>Razak, Azizah Abdul</dc:creator>
	<dc:subject xml:lang="en-US">direct torque control; field-oriented control; induction motor; multilevel inverter; sequential model predictive control</dc:subject>
	<dc:description xml:lang="en-US">The control of electric motors presents a fascinating topic in the field of electrical engineering. Three-phase induction motors are extensively employed in industrial applications, because of their durability and cost-effectiveness. Hence, induction motor control research remains a major priority in electrical drive technology. Field-oriented control (FOC) and direct torque control (DTC) are the most common control methods for industrial applications up to now. Recently developed microcontroller processing capabilities have enabled novel control technology like model predictive control (MPC). High-performance drive systems could benefit from this new control method. One of MPC approach, referred to as finite control set-model predictive control (FCS-MPC), focuses on reducing a single cost function. This is achieved by adjusting a weighting factor to prioritize either torque or flux error reduction. However, the primary drawbacks of the standard FCS-MPC lie in determining these weighting factors and the variable switching frequency, which greatly varies based on the operational conditions. A control approach that eliminated the weighing factor was proposed. The proposed sequential model predictive control (SMPC) method is applied to a 3-phase induction motor operated by a 5-level CHB inverter. Simulation results matched theoretical analysis. Results demonstrated that stator flux and torque are independently controlled without weighting factor, and low harmonic distortion levels.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23565</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v16.i1.pp287-297</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 1: March 2025; 287-297</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v16.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23565/14854</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Abobaker Kikki Abobaker, Norjulia Mohamad Nordin, Azizah Abdul Razak</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>