Akses terbuka
Jurnal
SINTA 1
Simulation and optimization of EMI filter of conducted emission for high voltage gain DC-DC converter
International Journal of Power Electronics and Drive Systems · Vol. 15 No. 2 (2024) · hlm. 902–912
ISSN 2722-256X, 2088-8694
Terbit 2024-06-01
Penerbit Institute of Advanced Engineering and Science
Bahasa eng
Abstrak
In the continuity of the work on design of high voltage gain DC-DC converter, used for feeding the CubeSat electrospray thrusters with a variable output voltage according to the maneuver size, this paper introduces a simulation of the converter model with MATLAB/Simulink to determine its conducted emission level. By referring to the MIL-STD-461 standard, a required passive electromagnetic interference (EMI) filter parameters are calculated to reduce, under thresholds, the converter noise. With consideration of the available volume and power constraints in this kind of satellite, the design of common-mode (CM) choke is optimized with proposed procedure optimization, so as to reduce its volume and electrical losses. Also, this optimization procedure can be generalized and applied for any passive EMI filter design.
Jaringan kolaborasi para penulis
20 penulis ·
36 tautan kepenulisan bersama
· 7 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Mohammed V University Ecole Mohammadia d'Ingénieurs Université Moulay Ismail de Meknes Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Simulation and optimization of EMI filter of conducted emission for high voltage gain DC-DC converter</dc:title>
<dc:creator>Ouhammam, Abdelaali</dc:creator>
<dc:creator>Mahmoudi, Hassane</dc:creator>
<dc:creator>El Hachimi, Youssef</dc:creator>
<dc:creator>Daghouri, Amina</dc:creator>
<dc:subject xml:lang="en-US">CubeSat; conducted emission; electromagnetic compatibility; electromagnetic interference filter; optimization procedure</dc:subject>
<dc:description xml:lang="en-US">In the continuity of the work on design of high voltage gain DC-DC converter, used for feeding the CubeSat electrospray thrusters with a variable output voltage according to the maneuver size, this paper introduces a simulation of the converter model with MATLAB/Simulink to determine its conducted emission level. By referring to the MIL-STD-461 standard, a required passive electromagnetic interference (EMI) filter parameters are calculated to reduce, under thresholds, the converter noise. With consideration of the available volume and power constraints in this kind of satellite, the design of common-mode (CM) choke is optimized with proposed procedure optimization, so as to reduce its volume and electrical losses. Also, this optimization procedure can be generalized and applied for any passive EMI filter design.</dc:description>
<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
<dc:contributor xml:lang="en-US"></dc:contributor>
<dc:date>2024-06-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22904</dc:identifier>
<dc:identifier>10.11591/ijpeds.v15.i2.pp902-912</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 15, No 2: June 2024; 902-912</dc:source>
<dc:source>2722-256X</dc:source>
<dc:source>2088-8694</dc:source>
<dc:source>10.11591/ijpeds.v15.i2</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22904/14588</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2024 Abdelaali Ouhammam, Youssef El Hachimi, Amina Daghori, Hassane Mahmoudi</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Ouhammam, A., Mahmoudi, H., El Hachimi, Y., & Daghouri, A. (2024). Simulation and optimization of EMI filter of conducted emission for high voltage gain DC-DC converter. International Journal of Power Electronics and Drive Systems, 15(2), 902–912. https://doi.org/10.11591/ijpeds.v15.i2.pp902-912
Salin
IEEE
A. Ouhammam, H. Mahmoudi, Y. El Hachimi, and A. Daghouri, “Simulation and optimization of EMI filter of conducted emission for high voltage gain DC-DC converter,” International Journal of Power Electronics and Drive Systems, vol. 15, no. 2, pp. 902–912, 2024, doi: 10.11591/ijpeds.v15.i2.pp902-912.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.