A recuperating converter is highly demanded in traction power substation to deliver the braking energy generated by a traction vehicle. Conventional voltage source inverter had been implemented in the traction power station. However, large ac line filters must be installed to improve the quality of ac voltages and currents. This paper proposes to install a nine-level Modular Multilevel Converter (MMC) as a recuperating converter. The main aim is to eliminate the need of ac line filters while producing good quality of ac voltage and current waveforms. The MMC is designed and modelled using MATLAB/Simulink Simulation tool. A centralized control of balancing all the sub-module capacitor voltage level is proposed with Third Harmonic Voltage Injection Level Shifted Pulse Width Modulation (THVI-LSPWM) technique. The simulation results prove that with the application of MMC, good quality of ac voltages and currents are being produced. The Total Harmonic Distortion indexes are found less than 3.5 % without using any ac line filters in the system. In addition, the classic DC link capacitance has also being eliminated.
Jaringan kolaborasi para penulis
9 penulis ·
11 tautan kepenulisan bersama
· 5 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Tenaga Nasional
University of Nottingham
University of Technology Malaysia
Norwegian University of Science and Technology
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.