Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Modelling and simulation of an on grid 100-kW photovoltaic system

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 3 (2023) · hlm. 1651–1659

DOI
10.11591/ijpeds.v14.i3.pp1651-1659
ISSN
2722-256X, 2088-8694
Terbit
2023-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This work proposes a design of a solar radiation generator system to extract a maximum power of 100 kilowatts for the uses of 400 volts, 50 Hertz electrical network, under standard conditions (1000 Watts/m2 and 25 °C). The main goal is to inject and control active and reactive power to the grid by a three-phase, one-stage solar grid-connected 100-kW photovoltaic (PV) plant, to keep the current's total harmonic distortion (THD) within the international requirements, and maintain a constant voltage regardless of solar radiation changes. This design consists of three control loops those are: the maximum power point tracking (MPPT), the DC-link voltage, and the current controller. The proposed system was simulated in MATLAB/Simulink environment and was applied on part of the Baghdad electrical network. The obtained results showed the efficiency of the proposed design and modelling.

Kata kunci

Jaringan kolaborasi para penulis

4 penulis · 4 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Hazim Sadeq Mohsin Al-WazniAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Modelling and simulation of an on grid 100-kW  photovoltaic system</dc:title>
	<dc:creator>Abed, Adnan Majeed</dc:creator>
	<dc:creator>Alkhazraji, Afaneen Anwer</dc:creator>
	<dc:creator>Al-Kubragyi, Shatha Suhbat Abdulla</dc:creator>
	<dc:subject xml:lang="en-US">DC-link voltage 3-phase inverter; Maximum power point tracking; Perturb and observe; Photovoltaic</dc:subject>
	<dc:description xml:lang="en-US">This work proposes a design of a solar radiation generator system to extract a maximum power of 100 kilowatts for the uses of 400 volts, 50 Hertz electrical network, under standard conditions (1000 Watts/m2 and 25 °C). The main goal is to inject and control active and reactive power to the grid by a three-phase, one-stage solar grid-connected 100-kW photovoltaic (PV) plant, to keep the current's total harmonic distortion (THD) within the international requirements, and maintain a constant voltage regardless of solar radiation changes. This design consists of three control loops those are: the maximum power point tracking (MPPT), the DC-link voltage, and the current controller. The proposed system was simulated in MATLAB/Simulink environment and was applied on part of the Baghdad electrical network. The obtained results showed the efficiency of the proposed design and modelling.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22536</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i3.pp1651-1659</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 3: September 2023; 1651-1659</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22536/14283</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Adnan Majeed Abed, Afaneen Anwer Alkhazraji, Shatha Suhbat Abdulla Al-Kubragyi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>