Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Rotary Switched Reluctance Actuator: A Review on Design Optimization and Its Control Methods

International Journal of Power Electronics and Drive Systems · Vol. 8 No. 3 (2017) · hlm. 1087–1100

DOI
10.11591/ijpeds.v8.i3.pp1087-1100
ISSN
2722-256X, 2088-8694
Terbit
2017-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

A switched reluctance actuator (SRA) is a type of electromagnetic stepper actuator that is gaining popularity for its simple and rugged construction, ability of extremely high-speed operation and hazard-free operation. SRA gained supremacy over permanent magnet actuators due to the fact that its building material are relatively low cost compared to the expensive and rare permanent magnets. SRA is already making its debut in automotive, medical and high precision applications. However, many parties are still oblivious to this new age actuator. This paper reviews the latest literature in terms of journal articles and conference proceedings regarding the different design parameters and control method of SRA. The impact of the parameters on the performance of SRA are discussed in details to provide valuable insight. This paper also discussed the advantages of various novel SRA structure designs that prove to be a huge contribution to the future technology. It is found that several design parameters such as the air gap when kept minimum, increases torque value; while increasing number of phases in SRA minimizes torque ripples. Increased stator and rotor arc angles will increase torque, not to mention a larger excitation current can also achieve the same effect. Researches are often done through Finite Element Method (FEM) analysis to verify the optimized design parameters before fabrication, whilst experimental procedures are executed to verify the simulation results. To ensure smooth phase switching and improved torque output, intelligent controllers are employed in speed control and direct torque control (DTC) methods of SRA.

Jaringan kolaborasi para penulis

11 penulis · 19 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknikal Malaysia Melaka
  • National University of Malaysia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yeo Chin KiatAfiliasi tidak diketahui3
Kamaruzzaman SopianNational University of Malaysia1
Izzatie Akmal ZulkarnainUniversiti Teknikal Malaysia Melaka1
Mohd Farriz BasarUniversiti Teknikal Malaysia Melaka1
Allan Soon Chan RoongUniversiti Teknikal Malaysia Melaka1
N. N. ChandrenUniversiti Teknikal Malaysia Melaka1
C. R. Allan SoonUniversiti Teknikal Malaysia Melaka1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Rotary Switched Reluctance Actuator: A Review on Design Optimization and Its Control Methods</dc:title>
	<dc:creator>Tee, Siau Ping</dc:creator>
	<dc:creator>Md Ghazaly, Mariam</dc:creator>
	<dc:creator>Chong, Shin Horng</dc:creator>
	<dc:creator>Jamaludin, Irma Wani</dc:creator>
	<dc:description xml:lang="en-US">A switched reluctance actuator (SRA) is a type of electromagnetic stepper actuator that is gaining popularity for its simple and rugged construction, ability of extremely high-speed operation and hazard-free operation. SRA gained supremacy over permanent magnet actuators due to the fact that its building material are relatively low cost compared to the expensive and rare permanent magnets. SRA is already making its debut in automotive, medical and high precision applications. However, many parties are still oblivious to this new age actuator. This paper reviews the latest literature in terms of journal articles and conference proceedings regarding the different design parameters and control method of SRA. The impact of the parameters on the performance of SRA are discussed in details to provide valuable insight. This paper also discussed the advantages of various novel SRA structure designs that prove to be a huge contribution to the future technology. It is found that several design parameters such as the air gap when kept minimum, increases torque value; while increasing number of phases in SRA minimizes torque ripples. Increased stator and rotor arc angles will increase torque, not to mention a larger excitation current can also achieve the same effect. Researches are often done through Finite Element Method (FEM) analysis to verify the optimized design parameters before fabrication, whilst experimental procedures are executed to verify the simulation results. To ensure smooth phase switching and improved torque output, intelligent controllers are employed in speed control and direct torque control (DTC) methods of SRA.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2017-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8358</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v8.i3.pp1087-1100</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 8, No 3: September 2017; 1087-1100</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v8.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/8358/7006</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Siau Ping Tee, Mariam Md Ghazaly, Shin Horng Chong, Irma Wani Jamaludin</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>