Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and simulation of inductive power transfer system using hybrid compensation topologies

International Journal of Power Electronics and Drive Systems · Vol. 16 No. 4 (2025) · hlm. 2453–2463

DOI
10.11591/ijpeds.v16.i4.pp2453-2463
ISSN
2722-256X, 2088-8694
Terbit
2025-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This research addresses the principle of wireless power transfer (WPT). The system is primarily based on inductive power transfer (IPT). IPT is a recent technology that enables electrical power to be transferred between two coils via a magnetic field without the need for physical conductors. This method is particularly useful in applications where conventional wires cannot be used, such as biomedical implants, electric vehicles, and consumer electronics. Existing advances in system design, magnetic materials, and compensation topologies have significantly improved system performance and expanded their application range. Main challenges in IPT systems include improving efficiency and transmission distance. Hybrid compensation techniques in IPT systems have emerged as a promising solution to enhance system stability and power transfer efficiency under varying load conditions. IPT systems ensure highly efficient battery transfer and charging. This paper presents the design and simulation of a 3.7 kW IPT system employing hybrid compensation topologies specifically inductor–capacitor–capacitor/series (LCC/S) and LCC/LCC configurations to enhance power transfer efficiency and maintain zero phase angle (ZPA) operation. The proposed system is simulated using ANSYS Maxwell and MATLAB/Simulink to evaluate voltage gain, resonant behavior, and power output under varying load conditions. The LCC/LCC topology demonstrates superior load-independent ZPA characteristics and improved receiver-side voltage stability. Simulation results confirm that both configurations achieve high efficiency and robust power transfer over an air gap of 100 mm, with the LCC/LCC system showing better tolerance to misalignment. These findings suggest that hybrid compensation topologies are viable candidates for medium-power wireless charging systems in electric vehicles and industrial automation.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 5 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Ninevah University
  • Northern Technical University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Asef A. SalehNorthern Technical University1
Rakan Khalil AntarNorthern Technical University1
Layth S. SalmanNinevah University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and simulation of inductive power transfer system using hybrid compensation topologies</dc:title>
	<dc:creator>Sami, Noor</dc:creator>
	<dc:creator>Al-Badrani, Harith</dc:creator>
	<dc:subject xml:lang="en-US">compensation topologies; electric vehicle; inductive power transfer; LCC/LCC compensation; LCC/S compensation; wireless power transfer</dc:subject>
	<dc:description xml:lang="en-US">This research addresses the principle of wireless power transfer (WPT). The system is primarily based on inductive power transfer (IPT). IPT is a recent technology that enables electrical power to be transferred between two coils via a magnetic field without the need for physical conductors. This method is particularly useful in applications where conventional wires cannot be used, such as biomedical implants, electric vehicles, and consumer electronics. Existing advances in system design, magnetic materials, and compensation topologies have significantly improved system performance and expanded their application range. Main challenges in IPT systems include improving efficiency and transmission distance. Hybrid compensation techniques in IPT systems have emerged as a promising solution to enhance system stability and power transfer efficiency under varying load conditions. IPT systems ensure highly efficient battery transfer and charging. This paper presents the design and simulation of a 3.7 kW IPT system employing hybrid compensation topologies specifically inductor–capacitor–capacitor/series (LCC/S) and LCC/LCC configurations to enhance power transfer efficiency and maintain zero phase angle (ZPA) operation. The proposed system is simulated using ANSYS Maxwell and MATLAB/Simulink to evaluate voltage gain, resonant behavior, and power output under varying load conditions. The LCC/LCC topology demonstrates superior load-independent ZPA characteristics and improved receiver-side voltage stability. Simulation results confirm that both configurations achieve high efficiency and robust power transfer over an air gap of 100 mm, with the LCC/LCC system showing better tolerance to misalignment. These findings suggest that hybrid compensation topologies are viable candidates for medium-power wireless charging systems in electric vehicles and industrial automation.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24373</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v16.i4.pp2453-2463</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 4: December 2025; 2453-2463</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v16.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24373/15088</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Noor Sami, Harith Al-Badrani</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>