Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Implementation of closed-loop field-oriented control for PMSM on rehabilitation robot using BTS 7960

International Journal of Power Electronics and Drive Systems · Vol. 16 No. 2 (2025) · hlm. 728–739

DOI
10.11591/ijpeds.v16.i2.pp728-739
ISSN
2722-256X, 2088-8694
Terbit
2025-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The efficiency of control systems in permanent magnet synchronous motors (PMSM) is crucial, especially for applications in physiotherapy robots. Previous studies have demonstrated that an open-loop field-oriented control (FOC) driver using BTS7960 outperforms the commonly used electronic speed controller (ESC). This research addresses the challenge of further improving efficiency by employing a closed-loop FOC driver with the BTS7960. The research methodology involves two main stages. First, a PSIM software simulation of a closed-loop FOC using a proportional integral (PI) controller is conducted. The aim is to determine the P and I parameters that result in the smallest settling time, steady-state error, and overshoot in controlling the PMSM motor's rotation per minute (RPM). The second stage involves hardware implementation with the BTS7960, where the PMSM motor RPM is compared under various loads ranging from 10-gram to 60 gram. RPM results from both open-loop and closed-loop configurations are compared. The results show that the closed-loop FOC driver has improved system transient response compared to the previous open-loop FOC driver, notably reducing the settling time from 2.24 seconds to 1.45 seconds for a 60 gram load. Therefore, this research concludes that a closed-loop configuration with well-tuned PI parameters can deliver better performance compared to open-loop methods, as clearly demonstrated.

Kata kunci

Jaringan kolaborasi para penulis

22 penulis · 77 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Telkom University
  • Institut Teknologi Telkom Surabaya
  • Institut Teknologi Telkom Purwokerto
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ardiansyah Al FarouqInstitut Teknologi Telkom Surabaya2
Isa HafidzInstitut Teknologi Telkom Surabaya2
Andi Nur HalisyahInstitut Teknologi Telkom Surabaya1
Radithya Anjar NismaraTelkom University1
Muhammad Rafli Ramadhan LubisTelkom University1
Nur Aliffah RizkianingtyasTelkom University1
Kensora Bintang Panji SatrioTelkom University1
Rangga Roospratama ArifTelkom University1
Annisa SalsabilaTelkom University1
Khodijah AmirohAfiliasi tidak diketahui1
Ardiansyah Al FarouqAfiliasi tidak diketahui1
Lora Khaula AmifiaInstitut Teknologi Telkom Surabaya1
Robin Addwiyansyah Alfaro SamratAfiliasi tidak diketahui1
Aditya YudhistiraAfiliasi tidak diketahui1
Ahmad HabibiAfiliasi tidak diketahui1
Helmy WidyantaraInstitut Teknologi Telkom Surabaya1
Mas Aly AfandiInstitut Teknologi Telkom Purwokerto1
Billy MontolaluInstitut Teknologi Telkom Surabaya1
Wahyu Andy PrastyabudiInstitut Teknologi Telkom Surabaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Implementation of closed-loop field-oriented control for PMSM on rehabilitation robot using BTS 7960</dc:title>
	<dc:creator>Nathalia, Vita Ayu</dc:creator>
	<dc:creator>Adiputra, Dimas</dc:creator>
	<dc:creator>Putranto, Rifki Dwi</dc:creator>
	<dc:subject xml:lang="en-US">BTS7960; field-oriented control; physiotherapy robot efficiency; PI controller tuning; PMSM</dc:subject>
	<dc:description xml:lang="en-US">The efficiency of control systems in permanent magnet synchronous motors (PMSM) is crucial, especially for applications in physiotherapy robots. Previous studies have demonstrated that an open-loop field-oriented control (FOC) driver using BTS7960 outperforms the commonly used electronic speed controller (ESC). This research addresses the challenge of further improving efficiency by employing a closed-loop FOC driver with the BTS7960. The research methodology involves two main stages. First, a PSIM software simulation of a closed-loop FOC using a proportional integral (PI) controller is conducted. The aim is to determine the P and I parameters that result in the smallest settling time, steady-state error, and overshoot in controlling the PMSM motor's rotation per minute (RPM). The second stage involves hardware implementation with the BTS7960, where the PMSM motor RPM is compared under various loads ranging from 10-gram to 60 gram. RPM results from both open-loop and closed-loop configurations are compared. The results show that the closed-loop FOC driver has improved system transient response compared to the previous open-loop FOC driver, notably reducing the settling time from 2.24 seconds to 1.45 seconds for a 60 gram load. Therefore, this research concludes that a closed-loop configuration with well-tuned PI parameters can deliver better performance compared to open-loop methods, as clearly demonstrated.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">telkom university</dc:contributor>
	<dc:date>2025-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23486</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v16.i2.pp728-739</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 2: June 2025; 728-739</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v16.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>info:eu-repo/grantAgreement/EC/FP7/754754</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23486/14900</dc:relation>
	<dc:rights xml:lang="en-US">info:eu-repo/semantics/openAccess</dc:rights>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Vita Ayu Nathalia</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>