Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Study the dynamic performance of PM machines for different rotor topologies

International Journal of Power Electronics and Drive Systems · Vol. 13 No. 4 (2022) · hlm. 2062–2070

DOI
10.11591/ijpeds.v13.i4.pp2062-2070
ISSN
2722-256X, 2088-8694
Terbit
2022-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

For hybrid and electric vehicle drive-train (automotive applications) achieving high torque and efficiency at a wide range of operating conditions can be considered an important matter. Therefore, precise structure optimization of the permanent magnet synchronous machines (PMSMs) is recommended. Consequently, the effect of the main leading design parameters (such as PM arrangement, magnet thickness, pole arc to pole pitch ratio, airgap length as well as the effect of shaft material) for a different number of rotor poles configuration of PMSM can achieve optimum design results in electric motors with economical cost and excellent performance. This paper submits a comparative analysis of different rotor topologies of (PMSM). Moreover, the dynamic performances of the suggested rotor geometry topologies are investigated based on investigation of finite element analysis (FEA). The analysis offers a piece of complete information about the magnetic flux distribution and magnetic flux density over the motor geometry. Gained results from the analysis are used to give a decision for the selection of a suitable PMSM design.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 47 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Northern Technical University
  • Middle Technical University
  • University of Mosul
  • University of Plymouth
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sanabel M. AL hajzberAfiliasi tidak diketahui3
Laith A. KhalafNorthern Technical University2
Nashwan Saleh SultanNorthern Technical University2
Ali Nasser HussainMiddle Technical University1
Firas Saaduldeen AhmedMiddle Technical University1
Mohammed Y. SulimanNorthern Technical University1
Ahmed H. AhmedNorthern Technical University1
Enaam AlbannaNorthern Technical University1
Ahmed A. Abdullah Al-KarakchiNorthern Technical University1
Zozan Saadallah HussainNorthern Technical University1
Rakan Khalil AntarNorthern Technical University1
Ahmed Ateya AlluNorthern Technical University1
Hiba Esam AzizNorthern Technical University1
Imad Idan Abed Al-KhalafNorthern Technical University1
Tamer KamelUniversity of Plymouth1
Ziyad Khalaf FarejNorthern Technical University1
Ahmed Hashim AhmedNorthern Technical University1
Ahmed Saad YahyaAfiliasi tidak diketahui1
Basil Mohammed SaiedUniversity of Mosul1
Mohammed Obaid MustafaUniversity of Mosul1
Mahmood Taha AlkhayyatNorthern Technical University1
Ziad Saeed MohammedNorthern Technical University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Study the dynamic performance of PM machines for different rotor topologies</dc:title>
	<dc:creator>Shanshal, Abdullah K.</dc:creator>
	<dc:creator>Ali, Ahmed J.</dc:creator>
	<dc:creator>AL-Rifaie, Alya H.</dc:creator>
	<dc:subject xml:lang="en-US">Airgap flux density; Finite element analysis; Permanent magnet synchronous machine; PM machines; Rotor topologies</dc:subject>
	<dc:description xml:lang="en-US">For hybrid and electric vehicle drive-train (automotive applications) achieving high torque and efficiency at a wide range of operating conditions can be considered an important matter. Therefore, precise structure optimization of the permanent magnet synchronous machines (PMSMs) is recommended. Consequently, the effect of the main leading design parameters (such as PM arrangement, magnet thickness, pole arc to pole pitch ratio, airgap length as well as the effect of shaft material) for a different number of rotor poles configuration of PMSM can achieve optimum design results in electric motors with economical cost and excellent performance. This paper submits a comparative analysis of different rotor topologies of (PMSM). Moreover, the dynamic performances of the suggested rotor geometry topologies are investigated based on investigation of finite element analysis (FEA). The analysis offers a piece of complete information about the magnetic flux distribution and magnetic flux density over the motor geometry. Gained results from the analysis are used to give a decision for the selection of a suitable PMSM design.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2022-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22068</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v13.i4.pp2062-2070</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 13, No 4: December 2022; 2062-2070</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v13.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22068/13997</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Abdullah K. Shanshal, Ahmed J. Ali, Alya H. AL-Rifaie</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>