Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Solar-powered seaweed powder milling: enhancing value in the blue economy

International Journal of Power Electronics and Drive Systems · Vol. 15 No. 3 (2024) · hlm. 1810–1817

DOI
10.11591/ijpeds.v15.i3.pp1810-1817
ISSN
2722-256X, 2088-8694
Terbit
2024-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Design and build a seaweed powder milling machine with the blue economy concept is one form of increasing the added value of selling seaweed in Indonesia and utilizing solar energy which is so abundant in Indonesia by using photovoltaic system. This machine is expected to increase the income of seaweed cultivators, and indirectly support the blue economy policy which is one of the policies in Indonesia. Design and build this machine using several supporting components, such as solar panel, battery control unit (BCU), inverter, battery, and motor to drive the seaweed powder milling machine. Testing is carried out by measuring the voltage and current output, and adding environmental conditions. Apart from that, the economics of the machine are also analyzed. Based on the results obtained, the machine can produce electrical energy in the range of 396.95-646 Wh/day, and can operate for up to 131 minutes, with a seaweed flour output of 10-20 kg per hour. From an economic perspective, the payback period is 0.22 years, NPV of IDR 605,286,359.01, with an IRR of 449%. From this value it can be seen that economically the tool is profitable if used by seaweed cultivators.

Kata kunci

Jaringan kolaborasi para penulis

34 penulis · 156 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Bisnis dan Teknologi Indonesia
  • Ministry of Marine Affairs and Fisheries
  • Universitas Bali Internasional
  • University of Nusa Cendana
  • Politeknik Elektronika Negeri Surabaya
  • IPB University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Jhon Septin Mourisdo SiregarAfiliasi tidak diketahui7
Lebrina Ivantry BoikhUniversity of Nusa Cendana7
I Komang Arya Ganda WigunaInstitut Bisnis dan Teknologi Indonesia5
Anis KhairunnisaMinistry of Marine Affairs and Fisheries3
Grangsang SotyaramadhaniAfiliasi tidak diketahui3
Aris WidagdoAfiliasi tidak diketahui3
Mahaldika CesranyMinistry of Marine Affairs and Fisheries2
I Wayan Dani PranataAfiliasi tidak diketahui2
Wawan HariantoAfiliasi tidak diketahui2
A A Gede Bagus ArianaAfiliasi tidak diketahui2
I Made Urip SumaharjaAfiliasi tidak diketahui2
Anak Agung Surya PradhanaInstitut Bisnis dan Teknologi Indonesia2
I Nyoman Tri Anindia PutraAfiliasi tidak diketahui2
Sri WidiastutikAfiliasi tidak diketahui2
I Kadek Budi SandikaInstitut Bisnis dan Teknologi Indonesia1
I Made Agus MahardianantaUniversitas Bali Internasional1
Putu Agus Mahadi PutraPoliteknik Elektronika Negeri Surabaya1
I Gede Sura AdnyanaUniversitas Bali Internasional1
Anis KhairunnisaAfiliasi tidak diketahui1
I Made Aditya NugrahaAfiliasi tidak diketahui1
Siluh Putu Sri Dia UtariAfiliasi tidak diketahui1
I Gusti Ayu BudiadnyaniAfiliasi tidak diketahui1
Desy FebriantiAfiliasi tidak diketahui1
Fenny Crista Anastasia PanjaitanAfiliasi tidak diketahui1
Resti Nurmala DewiAfiliasi tidak diketahui1
Siluh Putu Sri Dia UtariIPB University1
I Gusti Ayu BudiadnyaniAfiliasi tidak diketahui1
Desy FebriantiAfiliasi tidak diketahui1
Resti Nurmala DewiAfiliasi tidak diketahui1
Fenny Crista A. PanjaitanAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Solar-powered seaweed powder milling: enhancing value in the blue economy</dc:title>
	<dc:creator>Nugraha, I Made Aditya</dc:creator>
	<dc:creator>Desnanjaya, I Gusti Made Ngurah</dc:creator>
	<dc:creator>Luthfiani, Febi</dc:creator>
	<dc:creator>Idrus, Muhamad Amril</dc:creator>
	<dc:subject xml:lang="en-US">blue economy; milling machine; renewable energy; seaweed; solar energy</dc:subject>
	<dc:description xml:lang="en-US">Design and build a seaweed powder milling machine with the blue economy concept is one form of increasing the added value of selling seaweed in Indonesia and utilizing solar energy which is so abundant in Indonesia by using photovoltaic system. This machine is expected to increase the income of seaweed cultivators, and indirectly support the blue economy policy which is one of the policies in Indonesia. Design and build this machine using several supporting components, such as solar panel, battery control unit (BCU), inverter, battery, and motor to drive the seaweed powder milling machine. Testing is carried out by measuring the voltage and current output, and adding environmental conditions. Apart from that, the economics of the machine are also analyzed. Based on the results obtained, the machine can produce electrical energy in the range of 396.95-646 Wh/day, and can operate for up to 131 minutes, with a seaweed flour output of 10-20 kg per hour. From an economic perspective, the payback period is 0.22 years, NPV of IDR 605,286,359.01, with an IRR of 449%. From this value it can be seen that economically the tool is profitable if used by seaweed cultivators.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23235</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v15.i3.pp1810-1817</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 15, No 3: September 2024; 1810-1817</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v15.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23235/14690</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 I Made Aditya Nugraha, I Gusti Made Ngurah Desnanjaya, Febi Luthfiani, Muhamad Amril Idrus</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>