Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

An efficient hybrid biomechanical energy harvesting system using human motions for low-power applications

International Journal of Power Electronics and Drive Systems · Vol. 14 No. 1 (2023) · hlm. 433–443

DOI
10.11591/ijpeds.v14.i1.pp433-443
ISSN
2722-256X, 2088-8694
Terbit
2023-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The biomechanical energy harvesting system (BM-EHS) uses human daily activities to create electricity. The BM-EHS is one of the potential alternative technologies for powering wearable and implantable electronic gadgets without batteries. The hybrid BH-EHS is modeled using two different vibration source-based human activities in this manuscript. The piezoelectric (PE) and electromagnetic (EM) based EHS are combined in the hybrid BM-EHS. The PE- EHS is based on human walking and jagging motions and is represented using a mass-spring-damper system and PE stack. The EM- EHS is based on the human knee and hip motions, with shaft conversion and a DC motor. The PE, EM, and hybrid BM-based EHS are modeled using MATLAB/Simulink, and performance results are realized individually. The PE-EHS obtains the average output voltage of 0.5 V and harvests 53.18 mW of power. Similarly, the EM-EHS achieves the average load voltage of 0.567 V and 30.6 mW harvested power. The hybrid BM-EHS obtains the average load voltage of 0.79 V and harvests 86 mW of power. The proposed BM-EHS is compared with the existing EHS with better-harvested power and energy improvement for the given load conditions. Overall, the harvested power can power up the low-power applications.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 5 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Atria Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ganeshan ViswanathanAfiliasi tidak diketahui2
Madhusudhan MahadevaswamyAfiliasi tidak diketahui1
Manjunath Bimbitha Swarna GowriAtria Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">An efficient hybrid biomechanical energy harvesting system using human motions for low-power applications</dc:title>
	<dc:creator>Venugopal, Mohankumar</dc:creator>
	<dc:creator>Jayaramaiah, Govindanayakanapalya Venkatagiriyappa</dc:creator>
	<dc:subject xml:lang="en-US">Boost converter; Electromagnetic; Energy harvesting; Human motions; Piezoelectric; Power</dc:subject>
	<dc:description xml:lang="en-US">The biomechanical energy harvesting system (BM-EHS) uses human daily activities to create electricity. The BM-EHS is one of the potential alternative technologies for powering wearable and implantable electronic gadgets without batteries. The hybrid BH-EHS is modeled using two different vibration source-based human activities in this manuscript. The piezoelectric (PE) and electromagnetic (EM) based EHS are combined in the hybrid BM-EHS. The PE- EHS is based on human walking and jagging motions and is represented using a mass-spring-damper system and PE stack. The EM- EHS is based on the human knee and hip motions, with shaft conversion and a DC motor. The PE, EM, and hybrid BM-based EHS are modeled using MATLAB/Simulink, and performance results are realized individually. The PE-EHS obtains the average output voltage of 0.5 V and harvests 53.18 mW of power. Similarly, the EM-EHS achieves the average load voltage of 0.567 V and 30.6 mW harvested power. The hybrid BM-EHS obtains the average load voltage of 0.79 V and harvests 86 mW of power. The proposed BM-EHS is compared with the existing EHS with better-harvested power and energy improvement for the given load conditions. Overall, the harvested power can power up the low-power applications.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22048</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v14.i1.pp433-443</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 14, No 1: March 2023; 433-443</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v14.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/22048/14101</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Mohankumar Venugopal, Govindanayakanapalya Venkatagiriyappa Jayaramaiah</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>