Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Development of BSP for ARM9 Evaluation Board

International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 4 No. 3 (2015) · hlm. 161–172

DOI
10.11591/ijres.v4.i3.pp161-172
ISSN
2722-2608, 2089-4864
Terbit
2015-11-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

With an increasing usage of ARM9 core for different kinds of applications ranging from data acquisition to Mobile application, there arises the need for developing ARM9 based board. To bring up this board, board supporting package (BSP) is must. Board supporting package virtualizes the platform hardware so that the different drivers can be ported easily on any hardware. The boot loader is the initial stage of firmware, which initializes the hardware components presents on the board. A universal Bootloader is chosen and is to be customized with respect to target board. In the later section bootloader is interfaced to the kernel which is obtained form an authorized distributor under general purpose license. The customized board specific routines as well drivers are ported onto the hardware. Then the compiled kernel image is ported onto the target board using a debugger and SAM-BA utility. Linux kernel has seen major releases; the basic architecture of the Linux kernel has remained more or less unchanged. The latest 2.6 version of Linux kernel is ported onto target hardware. Kernel support for many architectures and high-end I/O devices gives the independence to choose appropriate hardware for developing system. The bootloader customization is the critical step, which involves a lot of modifications in the header files. BSP components such as bootloader, kernel is compiled using GNU tool chain; obtained image is ported on target using debugger. BSP porting is a very complex task, which required knowledge of hardware and software control sequence and boot strategy of the controller.

Jaringan kolaborasi para penulis

17 penulis · 28 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • M S Ramaiah University of Applied Sciences
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S.G. ShivaPrasad YadavAfiliasi tidak diketahui2
Nikhil Alex ThomasM S Ramaiah University of Applied Sciences2
Shashidhar H.G.M S Ramaiah University of Applied Sciences2
Sumant S YaliagrM S Ramaiah University of Applied Sciences1
Krishna Bhushan VutukuruM S Ramaiah University of Applied Sciences1
Varuna EswerM S Ramaiah University of Applied Sciences1
Sandeep G.Afiliasi tidak diketahui1
K RamakrishnaM S Ramaiah University of Applied Sciences1
Deepa KannanM S Ramaiah University of Applied Sciences1
Shiva Prasa YadavM S Ramaiah University of Applied Sciences1
M. M. MahirM S Ramaiah University of Applied Sciences1
R. MayurM S Ramaiah University of Applied Sciences1
Nilkantha SinghaM S Ramaiah University of Applied Sciences1
Vinutha AvaradhiM S Ramaiah University of Applied Sciences1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of BSP for ARM9 Evaluation Board</dc:title>
	<dc:creator>Pandit K., Vinayak</dc:creator>
	<dc:creator>Dessai, Sanket</dc:creator>
	<dc:creator>Chaudhari, Shilpa</dc:creator>
	<dc:description xml:lang="en-US">With an increasing usage of ARM9 core for different kinds of applications ranging from data acquisition to Mobile application, there arises the need for developing ARM9 based board. To bring up this board, board supporting package (BSP) is must. Board supporting package virtualizes the platform hardware so that the different drivers can be ported easily on any hardware. The boot loader is the initial stage of firmware, which initializes the hardware components presents on the board. A universal Bootloader is chosen and is to be customized with respect to target board. In the later section bootloader is interfaced to the kernel which is obtained form an authorized distributor under general purpose license. The customized board specific routines as well drivers are ported onto the hardware. Then the compiled kernel image is ported onto the target board using a debugger and SAM-BA utility. Linux kernel has seen major releases; the basic architecture of the Linux kernel has remained more or less unchanged. The latest 2.6 version of Linux kernel is ported onto target hardware. Kernel support for many architectures and high-end I/O devices gives the independence to choose appropriate hardware for developing system. The bootloader customization is the critical step, which involves a lot of modifications in the header files. BSP components such as bootloader, kernel is compiled using GNU tool chain; obtained image is ported on target using debugger. BSP porting is a very complex task, which required knowledge of hardware and software control sequence and boot strategy of the controller.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2015-11-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/1239</dc:identifier>
	<dc:identifier>10.11591/ijres.v4.i3.pp161-172</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 4, No 3: November 2015; 161-172</dc:source>
	<dc:source>2722-2608</dc:source>
	<dc:source>2089-4864</dc:source>
	<dc:source>10.11591/ijres.v4.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/1239/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>