Akses terbuka
Jurnal
SINTA 1
Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency
International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 14 No. 1 (2025) · hlm. 208–220
ISSN 2722-2608, 2089-4864
Terbit 2025-03-01
Penerbit Institute of Advanced Engineering and Science
Bahasa eng
Abstrak
Ultra-wide band (UWB) is a wireless technology deployed for transmitting data at high rates over short distances. Similar to Wi-Fi and Bluetooth, UWB is a radio frequency (RF) technology that operates via radio waves. To remove minor noise and glitches, low noise amplifier (LNA) is required because it amplifies weak signals without significantly adding noise. However, UWB has multiple frequencies that require coefficient change due to frequency variations. When low-pass filter (LPF) is employed to solve this, updates are necessary to manage delay and power because the LPF feedback is connected to LNA to increase delay and power consumption. In this research, LNA with a pre-distortion architecture is proposed to remove minor noises and small glitches. It is processed by using pre-distortion as an active component which reduces delay and power consumption in UWB. The pre-distortion process operates in the subthreshold voltage range by providing a transistor to each frequency as input, inturn effectively reducing the noise. The proposed LNA with pre-distortion architecture is developed on 180-nm complementary metal-oxide semiconductor (CMOS) technology using Cadense ASIC tool. The proposed architecture achieves a noise figure (NF) of 2.16 dB and less power consumption of 43.06×10-6 W when compared to the existing techniques namely, cascade amplifiers, W-band LNA, reflectionless receiver (RX), and broadband RF receiver front-end circuits.
Jaringan kolaborasi para penulis
7 penulis ·
16 tautan kepenulisan bersama
· 9 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Nitte Meenakshi Institute of Technology Ballari Institute of Technology & Management Universidad de Jaén Central University of Karnataka Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency</dc:title>
<dc:creator>Siddanna, Pradeep Kumar</dc:creator>
<dc:creator>Divakarachari, Parameshachari Bidare</dc:creator>
<dc:subject xml:lang="en-US">Complementary metal-oxide semiconductor technology; LNA with pre-distortion; Low-pass filter; Noise figure; Radio frequency; Ultra wide band</dc:subject>
<dc:description xml:lang="en-US">Ultra-wide band (UWB) is a wireless technology deployed for transmitting data at high rates over short distances. Similar to Wi-Fi and Bluetooth, UWB is a radio frequency (RF) technology that operates via radio waves. To remove minor noise and glitches, low noise amplifier (LNA) is required because it amplifies weak signals without significantly adding noise. However, UWB has multiple frequencies that require coefficient change due to frequency variations. When low-pass filter (LPF) is employed to solve this, updates are necessary to manage delay and power because the LPF feedback is connected to LNA to increase delay and power consumption. In this research, LNA with a pre-distortion architecture is proposed to remove minor noises and small glitches. It is processed by using pre-distortion as an active component which reduces delay and power consumption in UWB. The pre-distortion process operates in the subthreshold voltage range by providing a transistor to each frequency as input, inturn effectively reducing the noise. The proposed LNA with pre-distortion architecture is developed on 180-nm complementary metal-oxide semiconductor (CMOS) technology using Cadense ASIC tool. The proposed architecture achieves a noise figure (NF) of 2.16 dB and less power consumption of 43.06×10-6 W when compared to the existing techniques namely, cascade amplifiers, W-band LNA, reflectionless receiver (RX), and broadband RF receiver front-end circuits.</dc:description>
<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
<dc:contributor xml:lang="en-US">I have not received any fund from any organization.</dc:contributor>
<dc:date>2025-03-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/21408</dc:identifier>
<dc:identifier>10.11591/ijres.v14.i1.pp208-220</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 14, No 1: March 2025; 208-220</dc:source>
<dc:source>2722-2608</dc:source>
<dc:source>2089-4864</dc:source>
<dc:source>10.11591/ijres.v14.i1</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/21408/pdf</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2025 Institute of Advanced Engineering and Science (IAES)</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Siddanna, P. K., & Divakarachari, P. B. (2025). Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency. International Journal of Reconfigurable and Embedded Systems (IJRES), 14(1), 208–220. https://doi.org/10.11591/ijres.v14.i1.pp208-220
Salin
IEEE
P. K. Siddanna and P. B. Divakarachari, “Low-noise amplifier with pre-distortion architecture for ultra-wide band application in radio frequency,” International Journal of Reconfigurable and Embedded Systems (IJRES), vol. 14, no. 1, pp. 208–220, 2025, doi: 10.11591/ijres.v14.i1.pp208-220.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.