Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design and Implementation of Reduced Power Energy Efficient Binary Coded Decimal Adder

International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 8 No. 3 (2021) · hlm. 185–193

DOI
10.11591/ijres.v8.i3.pp185-193
ISSN
2722-2608, 2089-4864
Terbit
2021-02-22
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents a novel architecture for low power energy binary represented decimal addition. The proposed BCD adder uses Binary to Excess Six Converter (BESC) block for constant correction to adjusts binary outputs exceeding 9 to correct decimal values and exploits the inherent advantage of reduced delay and switching, due to elimination of long carry propagation in second stage addition as in conventional design and switching OFF of the BESC block for decimal outputs less than 9. The proposed BESC-BCD adder has been designed using VHDL code and synthesized using Altera Quartus II. Experimental results demonstrates that the proposed decimal adder can lead to significant power savings and delay reduction compared to existing BCD adders which is realised in better power-delay product(PDP) performance. For example the PDP saving of the proposed BESC-BCD adder for a 1 digit and 2 digit addition implementations are 11.6% and 16.05% respectively, compared to the best of the designs used for comparison.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 16 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bannari Amman Institute of Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Lin JohnAfiliasi tidak diketahui1
Simi Zerine SleebaAfiliasi tidak diketahui1
Karthika B.R.Afiliasi tidak diketahui1
Lakshmi Priya UnniAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design and Implementation of Reduced Power Energy Efficient Binary Coded Decimal Adder</dc:title>
	<dc:creator>Saravanakumar, N.</dc:creator>
	<dc:creator>Sudhan, K. Sakthi</dc:creator>
	<dc:creator>Vijeyakumar, K. N.</dc:creator>
	<dc:creator>Saranya, S.</dc:creator>
	<dc:subject xml:lang="en-US">Constant correction, Binary to Excess Six Conversion, Ripple carry adder, Terahertz optical asymmetric demultiplexer</dc:subject>
	<dc:description xml:lang="en-US">This paper presents a novel architecture for low power energy binary represented decimal addition. The proposed BCD adder uses Binary to Excess Six Converter (BESC) block for constant correction to adjusts binary outputs exceeding 9 to correct decimal values and exploits the inherent advantage of reduced delay and switching, due to elimination of long carry propagation in second stage addition as in conventional design and switching OFF of the BESC block for decimal outputs less than 9. The proposed BESC-BCD adder has been designed using VHDL code and synthesized using Altera Quartus II. Experimental results demonstrates that the proposed decimal adder can lead to significant power savings and delay reduction compared to existing BCD adders which is realised in better power-delay product(PDP) performance. For example the PDP saving of the proposed BESC-BCD adder for a 1 digit and 2 digit addition implementations are 11.6% and 16.05% respectively, compared to the best of the designs used for comparison.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-02-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/19494</dc:identifier>
	<dc:identifier>10.11591/ijres.v8.i3.pp185-193</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 8, No 3: November 2019; 185-193</dc:source>
	<dc:source>2722-2608</dc:source>
	<dc:source>2089-4864</dc:source>
	<dc:source>10.11591/ijres.v8.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/19494/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>