Akses terbuka
Jurnal
SINTA 1
Development of magnetic levitation system with position and orientation control
International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 12 No. 2 (2023) · hlm. 287–296
ISSN 2722-2608, 2089-4864
Terbit 2023-07-01
Penerbit Institute of Advanced Engineering and Science
Bahasa eng
Abstrak
This work demonstrates the design and development of a magnetic levitation (MagLev) system that is able to control both the position and orientation of the levitated object. For the position control, a pole placement method was exploited to estimate parameters of the proportional integral derivative (PID) controller. In addition, the MagLev was constructed using a pair of electromagnets, two infrared (IR) receiver-emitter pairs and a servo motor to allow the orientation of the object to be controlled. The proposed controller was programmed in a LabVIEW environment, which was then compiled and deployed into an embedded NI myRIO board. Experimental results demonstrated that the proposed method was able to achieve a zero steady-state orientation error when the object was rotated from 0 ◦ to ±90◦, a steady-state position error of 0.3 cm without rotation, and steady-state position errors of no greater than 1.2 cm with rotation.
Jaringan kolaborasi para penulis
21 penulis ·
52 tautan kepenulisan bersama
· 10 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universiti Sains Malaysia Universiti Teknologi MARA Intel (United States) State University of Malang
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Development of magnetic levitation system with position and orientation control</dc:title>
<dc:creator>Abu Bakar, Siti Juliana</dc:creator>
<dc:creator>J-Shenn, Koay</dc:creator>
<dc:creator>Goh, Patrick</dc:creator>
<dc:creator>Ahmad, Nur Syazreen</dc:creator>
<dc:subject xml:lang="en-US">Electromagnets; Embedded control system; Levitation; Orientation; PID control</dc:subject>
<dc:description xml:lang="en-US">This work demonstrates the design and development of a magnetic levitation (MagLev) system that is able to control both the position and orientation of the levitated object. For the position control, a pole placement method was exploited to estimate parameters of the proportional integral derivative (PID) controller. In addition, the MagLev was constructed using a pair of electromagnets, two infrared (IR) receiver-emitter pairs and a servo motor to allow the orientation of the object to be controlled. The proposed controller was programmed in a LabVIEW environment, which was then compiled and deployed into an embedded NI myRIO board. Experimental results demonstrated that the proposed method was able to achieve a zero steady-state orientation error when the object was rotated from 0 ◦ to ±90◦ , a steady-state position error of 0.3 cm without rotation, and steady-state position errors of no greater than 1.2 cm with rotation.</dc:description>
<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
<dc:contributor xml:lang="en-US">Ministry of Higher Education Malaysia</dc:contributor>
<dc:date>2023-07-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/20707</dc:identifier>
<dc:identifier>10.11591/ijres.v12.i2.pp287-296</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 12, No 2: July 2023; 287-296</dc:source>
<dc:source>2722-2608</dc:source>
<dc:source>2089-4864</dc:source>
<dc:source>10.11591/ijres.v12.i2</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/20707/pdf</dc:relation>
<dc:rights xml:lang="en-US">Copyright (c) 2023 Siti Juliana Abu Bakar, Koay J-Shenn, Patrick Goh, Nur Syazreen Ahmad</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Abu Bakar, S. J., J-Shenn, K., Goh, P., & Ahmad, N. S. (2023). Development of magnetic levitation system with position and orientation control. International Journal of Reconfigurable and Embedded Systems (IJRES), 12(2), 287–296. https://doi.org/10.11591/ijres.v12.i2.pp287-296
Salin
IEEE
S. J. Abu Bakar, K. J-Shenn, P. Goh, and N. S. Ahmad, “Development of magnetic levitation system with position and orientation control,” International Journal of Reconfigurable and Embedded Systems (IJRES), vol. 12, no. 2, pp. 287–296, 2023, doi: 10.11591/ijres.v12.i2.pp287-296.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.