Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Two state-of-the-arts current-mode ternary full adders based on CNTFET Technology

International Journal of Reconfigurable and Embedded Systems (IJRES) · Vol. 9 No. 1 (2020) · hlm. 19–27

DOI
10.11591/ijres.v9.i1.pp19-27
ISSN
2722-2608, 2089-4864
Terbit
2020-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Adder core respecting to its various applications in VLSI circuits and systems is considered as the most critical building block in microprocessors, digital signal processors and arithmetic operations. Novel designs of a low power and complexity Current Mode 1-bit Full Adder cell based on CNTFET technology has been presented in this paper. Three major parts construct their structures; 1) the first part that converts current to voltage; 2) threshold detectors (TD); and 3) parallel paths to convey the output currents flow. Adjusting threshold voltages which are significant factor for setting threshold detectors switching point has been achieved by means of CNTFET technology. It would bring significant improvements in adjusting threshold voltages, regarding to its unique characterizations. Simple design, less transistor counts and static power dissipation and better performance comparing previous designs could be considered as some advantages of the novel designs.

Kata kunci

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Islamic Azad University, Tehran
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mehdi BagherizadehIslamic Azad University, Tehran1
Mostafa TorabiIslamic Azad University, Tehran1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijres.iaescore.com/index.php/IJRES/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Two state-of-the-arts current-mode ternary full adders based on  CNTFET Technology</dc:title>
	<dc:creator>Moradi, Mona</dc:creator>
	<dc:subject xml:lang="en-US">Current mode logic; CNTFET; MVL circuitry; Ternary full adder</dc:subject>
	<dc:description xml:lang="en-US">Adder core respecting to its various applications in VLSI circuits and systems is considered as the most critical building block in microprocessors, digital signal processors and arithmetic operations. Novel designs of a low power and complexity Current Mode 1-bit Full Adder cell based on CNTFET technology has been presented in this paper. Three major parts construct their structures; 1) the first part that converts current to voltage; 2) threshold detectors (TD); and 3) parallel paths to convey the output currents flow. Adjusting threshold voltages which are significant factor for setting threshold detectors switching point has been achieved by means of CNTFET technology. It would bring significant improvements in adjusting threshold voltages, regarding to its unique characterizations. Simple design, less transistor counts and static power dissipation and better performance comparing previous designs could be considered as some advantages of the novel designs.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijres.iaescore.com/index.php/IJRES/article/view/19485</dc:identifier>
	<dc:identifier>10.11591/ijres.v9.i1.pp19-27</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Reconfigurable and Embedded Systems (IJRES); Vol 9, No 1: March 2020; 19-27</dc:source>
	<dc:source>2722-2608</dc:source>
	<dc:source>2089-4864</dc:source>
	<dc:source>10.11591/ijres.v9.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijres.iaescore.com/index.php/IJRES/article/view/19485/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>