Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Multifunctional Bangka kaolin for zeolite 3A pellet synthesis and its application in ethanol dehydration

International Journal of Renewable Energy Development : JRED · Vol. 15 No. 4 (2026) · hlm. 885–896

DOI
10.61435/ijred.2026.62522
ISSN
2252-4940
Terbit
2026-07-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The development of cost-effective, highly efficient adsorbents for bioethanol dehydration is crucial to advancing sustainable biofuel integration, including the upcoming E10 fuel-blending mandates in Indonesia. This study evaluates the multifunctional capability of locally sourced Bangka kaolin as both a structural precursor and an active binder for the synthesis of binder-converted Zeolite 3A pellets, specifically tailored for ethanol-water azeotrope separation. The fabrication procedure followed a comprehensive two-stage method, commencing with the thermal calcination of raw kaolin at 600°C and 750°C to generate reactive metakaolin. Subsequently, a hydrothermal synthesis strategy was employed using different alkalinity settings, governed by H2O/Na2O molar ratios of 40, 43, and 45, corresponding to NaOH concentrations of 2.88 M, 2.67 M, and 2.55 M, respectively. This solution-gel matrix was homogenized with synthesized Zeolite Na-A powder, extruded into pellets, and subjected to an in-situ hydrothermal crystallization phase to transform the amorphous binder into a crystalline Zeolite A framework. Final structural modification was performed via successive liquid-phase potassium-ion exchanges using 21 wt.% and 11 wt.% chloride potassium solutions to shrink the effective pore opening to approximately 3A. Structural and compositional assessments via X-ray diffraction (XRD) and X-ray fluorescence (XRF) confirmed the successful formation of Zeolite A frameworks with no residual sodium oxide (0.00% Na2O), achieving significant potassium loading (30.15–34.58 wt.% K2O) and moderate relative crystallinities ranging from 55% to 74%. Textural diagnostics from N2 physisorption demonstrated that the synthesized pellets exhibit an IUPAC Type IV isotherm coupled with a Type H3 hysteresis loop, indicating a hierarchically organized pore structure with crucial secondary mesopores. Performance evaluation during dynamic ethanol-water separation confirmed that the synthesized Zeolite 3A pellets exhibit an enhanced water adsorption capacity of up to 27.97 wt.% for the ZKA-750-45 sample, yielding fuel-grade bioethanol with a peak purity of 99.7 wt.%.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 120 tautan kepenulisan bersama · 49 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • IPB University
  • Tanjungpura University
  • Universitas Bung Hatta
  • Pertamina (Indonesia)
  • Universitas PGRI Semarang
  • Universitas Negeri Padang
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Subagjo SubagjoBandung Institute of Technology6
Grandprix T.M. KadjaBandung Institute of Technology4
Muladno MuladnoIPB University2
Dyah Perwitasari‐FarajallahIPB University2
Achmad FarajallahIPB University2
Farhansyah Yusuf Putra HudayaBandung Institute of Technology2
Rezky Oktaviandy AnggaswaraBandung Institute of Technology2
Tri Partono AdhiBandung Institute of Technology2
Fibria KaswinarniUniversitas PGRI Semarang1
Labib AnwarUniversitas PGRI Semarang1
Eny EnawatyTanjungpura University1
Rini MuhariniTanjungpura University1
Hanna Rohmatul MaulidiyahTanjungpura University1
Risya SasriTanjungpura University1
Heri PrabowoUniversitas Negeri Padang1
Arif AlgifariUniversitas Negeri Padang1
Herri SusantoBandung Institute of Technology1
Joko WaluyoSebelas Maret University1
Petric Marc RuyaBandung Institute of Technology1
Dwi HantokoZhejiang University of Technology1
Jenny RizkianaBandung Institute of Technology1
Mi YanZhejiang University of Technology1
Tjandra SetiadiBandung Institute of Technology1
Made Tri Ari Penia KresnowatiBandung Institute of Technology1
Ibnu Maulana HidayatullahBandung Institute of Technology1
I Gusti Bagus Ngurah MakertiharthaBandung Institute of Technology1
Azizah NabilahBandung Institute of Technology1
Hanief AuliaBandung Institute of Technology1
Carolus B. RasrendaAfiliasi tidak diketahui1
Oki MurazaPertamina (Indonesia)1
Wawan RustyawanPertamina (Indonesia)1
Ismal GamarPertamina (Indonesia)1
Nadya NurdiniBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Multifunctional Bangka kaolin for zeolite 3A pellet synthesis and its application in ethanol dehydration</dc:title>
	<dc:creator>Ulfah, Maria</dc:creator>
	<dc:creator>Pasymi, Pasymi</dc:creator>
	<dc:creator>Amir, Amelia</dc:creator>
	<dc:creator>Sutopo, Ulung Muhammad</dc:creator>
	<dc:creator>Burmawi, Burmawi</dc:creator>
	<dc:creator>Gunawan, Melia Laniwati</dc:creator>
	<dc:creator>Makertihartha, I.G.B.N.</dc:creator>
	<dc:subject xml:lang="en-US">Bangka kaolin; calcination; metakaolin; pelletization; zeolite 3Å</dc:subject>
	<dc:description xml:lang="en-US">The development of cost-effective, highly efficient adsorbents for bioethanol dehydration is crucial to advancing sustainable biofuel integration, including the upcoming E10 fuel-blending mandates in Indonesia. This study evaluates the multifunctional capability of locally sourced Bangka kaolin as both a structural precursor and an active binder for the synthesis of binder-converted Zeolite 3A pellets, specifically tailored for ethanol-water azeotrope separation. The fabrication procedure followed a comprehensive two-stage method, commencing with the thermal calcination of raw kaolin at 600°C and 750°C to generate reactive metakaolin. Subsequently, a hydrothermal synthesis strategy was employed using different alkalinity settings, governed by H2O/Na2O molar ratios of 40, 43, and 45, corresponding to NaOH concentrations of 2.88 M, 2.67 M, and 2.55 M, respectively. This solution-gel matrix was homogenized with synthesized Zeolite Na-A powder, extruded into pellets, and subjected to an in-situ hydrothermal crystallization phase to transform the amorphous binder into a crystalline Zeolite A framework. Final structural modification was performed via successive liquid-phase potassium-ion exchanges using 21 wt.% and 11 wt.% chloride potassium solutions to shrink the effective pore opening to approximately 3A. Structural and compositional assessments via X-ray diffraction (XRD) and X-ray fluorescence (XRF) confirmed the successful formation of Zeolite A frameworks with no residual sodium oxide (0.00% Na2O), achieving significant potassium loading (30.15–34.58 wt.% K2O) and moderate relative crystallinities ranging from 55% to 74%. Textural diagnostics from N2 physisorption demonstrated that the synthesized pellets exhibit an IUPAC Type IV isotherm coupled with a Type H3 hysteresis loop, indicating a hierarchically organized pore structure with crucial secondary mesopores. Performance evaluation during dynamic ethanol-water separation confirmed that the synthesized Zeolite 3A pellets exhibit an enhanced water adsorption capacity of up to 27.97 wt.% for the ZKA-750-45 sample, yielding fuel-grade bioethanol with a peak purity of 99.7 wt.%.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2026-07-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/62522</dc:identifier>
	<dc:identifier>10.61435/ijred.2026.62522</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 15, No 4 (2026): July 2026; 885-896</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/62522/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>