Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Premixed Combustion of Coconut Oil on Perforated Burner

International Journal of Renewable Energy Development : JRED · Vol. 2 No. 3 (2013) · hlm. 133–139

DOI
10.14710/ijred.2.3.133-139
ISSN
2252-4940
Terbit
2013-10-30
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Coconut oil premixed combustion behavior has been studied experimentally on perforated burner with equivalence ratio (φ) varied from very lean until very rich. The results showed that burning of glycerol needs large number of air so that the laminar burning velocity (SL) is the highest at very lean mixture and the flame is in the form of individual Bunsen flame on each of the perforated plate hole. As φ is increased the SL decreases and the secondary Bunsen flame with open tip occurs from φ =0.54 at the downstream of perforated flame. The perforated flame disappears at φ = 0.66 while the secondary Bunsen flame still exist with SL increases following that of hexadecane flame trend and then extinct when the equivalence ratio reaches one or more. Surrounding ambient air intervention makes SL decreases, shifts lower flammability limit into richer mixture, and performs triple and cellular flames. The glycerol diffusion flame radiation burned fatty acids that perform cellular islands on perforated hole. Without glycerol, laminar flame velocity becomes higher and more stable as perforated flame at higher φ. At rich mixture the Bunsen flame becomes unstable and performs petal cellular around the cone flame front.

Kata kunci

Jaringan kolaborasi para penulis

27 penulis · 87 tautan kepenulisan bersama · 31 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Udayana University
  • Nanyang Technological University
  • Universitas Negeri Surabaya
  • Politeknik Negeri Malang
  • IPB University
  • Leiden University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Willy Satrio NugrohoUniversity of Brawijaya2
Hadi SarosoPoliteknik Negeri Malang2
Nurkholis HamidiUniversity of Brawijaya2
PurnamiUniversity of Brawijaya1
Lilis YuliatiUniversity of Brawijaya1
Fikrul Akbar AlamsyahUniversity of Brawijaya1
Abdul Mudjib Sulaiman WahidNanyang Technological University1
Muhaji MuhajiUniversitas Negeri Surabaya1
Y YuliantiUniversity of Brawijaya1
Mega NursasongkoUniversity of Brawijaya1
Andik IsdiantoUniversity of Brawijaya1
Hagus TarnoUniversity of Brawijaya1
Dewa Gede Raka WiadnyaUniversity of Brawijaya1
Adriani SunuddinIPB University1
Bambang SemediUniversity of Brawijaya1
Citra Satrya Utama DewiUniversity of Brawijaya1
Gatot CiptadiUniversity of Brawijaya1
Sukandar SukandarUniversity of Brawijaya1
Sekar M.C. HerandarudewiLeiden University1
PurnamiAfiliasi tidak diketahui1
Dionysius Joseph Djoko Herry SantjojoUniversity of Brawijaya1
Fitria Indra SeptiUniversity of Brawijaya1
I Nyoman Prayana TrisnaUdayana University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Premixed Combustion of Coconut Oil on Perforated Burner</dc:title>
	<dc:creator>Wirawan, I.K.G.</dc:creator>
	<dc:creator>Wardana, I.N.G.</dc:creator>
	<dc:creator>Soenoko, Rudy</dc:creator>
	<dc:creator>Wahyudi, Slamet</dc:creator>
	<dc:subject xml:lang="en-US">cellular flame; glycerol; perforated flame;secondary Bunsen flame with open tip; triple flame</dc:subject>
	<dc:description xml:lang="en-US">Coconut oil premixed combustion behavior has been studied experimentally on perforated burner with equivalence ratio (φ) varied from very lean until very rich. The results showed that burning of glycerol needs large number of air so that the laminar burning velocity (SL) is the highest at very lean mixture and the flame is in the form of individual Bunsen flame on each of the perforated plate hole. As φ is increased the  SL decreases and the secondary Bunsen flame with open tip occurs from φ =0.54 at the downstream of perforated flame. The perforated flame disappears at φ = 0.66 while the secondary Bunsen flame still exist with SL increases following that of hexadecane flame trend and then extinct when the equivalence ratio reaches one or more. Surrounding ambient air intervention makes SL decreases, shifts lower flammability limit into richer mixture, and performs triple and cellular flames. The glycerol diffusion flame radiation burned fatty acids that perform cellular islands on perforated hole.  Without glycerol, laminar flame velocity becomes higher and more stable as perforated flame at higher φ. At rich mixture the Bunsen flame becomes unstable and performs petal cellular around the cone flame front. </dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2013-10-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/5647</dc:identifier>
	<dc:identifier>10.14710/ijred.2.3.133-139</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 2, No 3 (2013): October 2013; 133-139</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/5647/5028</dc:relation>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>