Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A porous activated carbon derived from banana peel by hydrothermal activation two-step methods

International Journal of Renewable Energy Development : JRED · Vol. 14 No. 2 (2025) · hlm. 322–331

DOI
10.61435/ijred.2025.60847
ISSN
2252-4940
Terbit
2025-03-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Activated carbon from banana peel waste through two stages of hydrothermal (HT) and physical activation processes has been carried out. The hydrothermal process was carried out at a temperature of 200 oC with a holding time of 2 or 6 hours. The hydrochar that had been obtained was then activated in the second stage with nitrogen gas flow (N2) at a temperature of 700 oC for 1 hour with a flow rate of 100 mL/min. The difference in treatment, without the HT process, two stages of activation, variations in activator agents (water, H3PO4, and PEG6000), water volume ratio and HT process holding time were studied for their effects on the specific surface area (SSA) and structure of activated carbon. SSA was measured using the Brunauer–Emmett–Teller (BET) adsorption method, x-ray crystallography was used to identify the crystalline phase and carbon structure parameters, and the surface morphology of activated carbon was observed using FESEM. The results showed that the activation method and process conditions greatly influenced the (SSA) of activated carbon. HT activation using a combination of activator agents produced an SSA reaching 476.9 m2/g. X-ray diffraction analysis showed that HT activation increased the degree of crystallization of activated carbon. The spherical surface structure of activated carbon was formed when H3PO4 was added, while the layered structure was formed when PEG6000 was used. Overall, the two-step activation preceded by the HT process with the addition of H3PO4 produced activated carbon with better SSA and carbon structure and has the potential to be used in wide applications such as EDLC supercapacitor electrode materials, battery cathodes, and adsorption materials.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 83 tautan kepenulisan bersama · 51 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Indonesian Institute of Sciences
  • Parahyangan Catholic University
  • National Research and Innovation Agency
  • Universitas Malahayati
  • Tarumanagara University
  • Pertamina (Indonesia)
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
TriyonoAfiliasi tidak diketahui2
Wega TrisunaryantiUniversitas Gadjah Mada2
Tumpal Ojahan RajagukgukUniversitas Malahayati2
Muhammad Al MuttaqiiNational Research and Innovation Agency2
Kusno IsnugrohoIndonesian Institute of Sciences2
David Candra BirawidhaIndonesian Institute of Sciences2
Muhammad Nasir AminIndonesian Institute of Sciences2
Dyah Ayu FatmawatiUniversitas Gadjah Mada1
Uswatul ChasanahUniversitas Gadjah Mada1
Haryo Satriya OktavianoPertamina (Indonesia)1
Anissa FitriaUniversitas Gadjah Mada1
Himawan Tri Bayu Murti PetrusUniversitas Gadjah Mada1
Tabita Kristina Mora Ayu PanggabeanParahyangan Catholic University1
Ratna Frida SusantiParahyangan Catholic University1
Anastasia Prima KristijartiParahyangan Catholic University1
Kevin Cleary WantaParahyangan Catholic University1
Anang AnsoriUniversitas Malahayati1
Ferdy - ArdiyansyahUniversitas Malahayati1
Junita BarusIndonesian Agency for Agricultural Research and Development1
Muhammad AminIndonesian Institute of Sciences1
Rajiman RajimanNational Nuclear Energy Agency of Indonesia1
Saparudin SaparudinTarumanagara University1
Sofia Wangsadinata AlisjahbanaTarumanagara University1
Ilyas SadadLampung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A porous activated carbon derived from banana peel by hydrothermal activation two-step methods</dc:title>
	<dc:creator>Hendronursito, Yusup</dc:creator>
	<dc:creator>Astuti, Widi</dc:creator>
	<dc:creator>Sabarman, Harsojo</dc:creator>
	<dc:creator>Santoso, Iman</dc:creator>
	<dc:subject xml:lang="en-US">carbon active; banana peel; hydrothermal; specific surface area; H3PO4</dc:subject>
	<dc:description xml:lang="en-US">Activated carbon from banana peel waste through two stages of hydrothermal (HT) and physical activation processes has been carried out. The hydrothermal process was carried out at a temperature of 200 oC with a holding time of 2 or 6 hours. The hydrochar that had been obtained was then activated in the second stage with nitrogen gas flow (N2) at a temperature of 700 oC for 1 hour with a flow rate of 100 mL/min. The difference in treatment, without the HT process, two stages of activation, variations in activator agents (water, H3PO4, and PEG6000), water volume ratio and HT process holding time were studied for their effects on the specific surface area (SSA) and structure of activated carbon. SSA was measured using the Brunauer–Emmett–Teller (BET) adsorption method, x-ray crystallography was used to identify the crystalline phase and carbon structure parameters, and the surface morphology of activated carbon was observed using FESEM. The results showed that the activation method and process conditions greatly influenced the (SSA) of activated carbon. HT activation using a combination of activator agents produced an SSA reaching 476.9 m2/g. X-ray diffraction analysis showed that HT activation increased the degree of crystallization of activated carbon. The spherical surface structure of activated carbon was formed when H3PO4 was added, while the layered structure was formed when PEG6000 was used. Overall, the two-step activation preceded by the HT process with the addition of H3PO4 produced activated carbon with better SSA and carbon structure and has the potential to be used in wide applications such as EDLC supercapacitor electrode materials, battery cathodes, and adsorption materials.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2025-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/60847</dc:identifier>
	<dc:identifier>10.61435/ijred.2025.60847</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 14, No 2 (2025): March 2025; 322-331</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/60847/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>