Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Morphological and thermal stability analysis of Sn/C electrodes synthesized through impregnation and precipitation methods for CO2 electroreduction

International Journal of Renewable Energy Development : JRED · Vol. 14 No. 5 (2025) · hlm. 869–881

DOI
10.61435/ijred.2025.61280
ISSN
2252-4940
Terbit
2025-09-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This study investigates tin (Sn) based electrodes supported by graphite for the electrochemical reduction of carbon dioxide (ECO2R) to formic acid, comparing precipitation and impregnation synthesis methods. Electrodes were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetric Analysis (TGA), Cyclic Voltammetry (CV), Chronoamperometry, and Electrochemical Impedance Spectroscopy (EIS). The precipitation method yielded higher Sn content (91.22%) and superior thermal stability (3% mass loss at 1000°C vs. 45% for impregnation). Morphological analysis through SEM revealed precipitation-synthesized electrodes exhibited more uniform Sn particle distribution across the graphite surface, while impregnation resulted in larger Sn agglomerates with less homogeneous coverage, significantly influencing electroactive surface area and catalytic performance. The electrochemical performance of electrodes was tested using H-cell. CV showed decreased cathodic current for Sn/C electrodes compared to pure graphite in CO2-saturated electrolyte, while chronoamperometry indicated slightly better sustained performance for precipitation-synthesized electrodes with stabilized current densities after 3 hours of operation. EIS analysis suggested the precipitation method yields a marginally lower ohmic resistance (28.8 Ω vs. 29.8 Ω), resulting in a more favorable electrode structure for overall catalytic activity. Both methods showed lower ohmic resistance than that of pure graphite (38.1 Ω), the precipitation-synthesized Sn/C electrode emerged as the preferred selection for ECO2R to formic acid, balancing high Sn content, thermal stability, superior durability, and better Faradaic efficiency. The observed performance differences were attributed to distinct metal-support interactions formed during synthesis, with precipitation creating stronger metal-carbon bonds that enhance stability but potentially limit certain active sites necessary for optimal CO2 reduction kinetics. This comprehensive characterization revealed that the precipitation-synthesized electrode offers the most promising foundation for further development, potentially through process optimization, hybrid synthesis approaches, or targeted doping strategies to enhance catalytic activity while maintaining the advantageous stability characteristics.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 126 tautan kepenulisan bersama · 59 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Lampung University
  • National Institute of Advanced Industrial Science and Technology
  • Kementerian Energi dan Sumber Daya Mineral
  • Sumatera Institute of Technology
  • IPB University
  • Korea Institute of Science and Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Wibawa Hendra SaputeraBandung Institute of Technology7
Isdiriayani NurdinBandung Institute of Technology6
Heri RustamajiLampung University6
Jenny RizkianaBandung Institute of Technology5
Tatang Hernas SoerawidjajaBandung Institute of Technology4
Ardiyan HarimawanBandung Institute of Technology3
Fauzi YusupandiSumatera Institute of Technology3
Guoqing GuanHirosaki University3
Darmansyah DarmansyahLampung University3
Pramahadi FebriyantoSumatera Institute of Technology3
Simparmin Br GintingLampung University3
Tjandra SetiadiBandung Institute of Technology2
Sung Pil YoonKorea Institute of Science and Technology2
Tae‐Hoon LimKorea Institute of Science and Technology2
Aditya Farhan ArifAfiliasi tidak diketahui2
Ridho Eka YandraAfiliasi tidak diketahui2
Ditdit Nugeraha UtamaBinus University1
Taufik DjatnaIPB University1
Erliza HambaliIPB University1
Marimin .Afiliasi tidak diketahui1
Vita WonoputriBandung Institute of Technology1
Christian AslanBandung Institute of Technology1
Melia LaniwatiBandung Institute of Technology1
Anita KusumawardhaniBandung Institute of Technology1
Haryo Pandu WinotoBandung Institute of Technology1
I Gusti Bagus Ngurah MakertiharthaBandung Institute of Technology1
Antonius IndartoBandung Institute of Technology1
Yano Surya PradanaUniversitas Gadjah Mada1
Alif Kembara AlamBandung Institute of Technology1
Akiko TanakaNational Institute of Advanced Industrial Science and Technology1
Toshihiro HirotsuNational Institute of Advanced Industrial Science and Technology1
Shinichi GotoNational Institute of Advanced Industrial Science and Technology1
Parncheewa UdomsapNational Science and Technology Development Agency1
Godlief F. NeonufaArtha Wacana Christian University1
Rd. Habib R. M. T. Al-AzizBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Morphological and thermal stability analysis of Sn/C electrodes synthesized through impregnation and precipitation methods for CO2 electroreduction</dc:title>
	<dc:creator>Eviani, Mitra</dc:creator>
	<dc:creator>Prakoso, Tirto</dc:creator>
	<dc:creator>Kusdiana, Dadan</dc:creator>
	<dc:creator>Widiatmoko, Pramujo</dc:creator>
	<dc:creator>Devianto, Hary</dc:creator>
	<dc:subject xml:lang="en-US">Tin electrodes; precipitation; impregnation; carbon support; CO2 electroreduction</dc:subject>
	<dc:description xml:lang="en-US">This study investigates tin (Sn) based electrodes supported by graphite for the electrochemical reduction of carbon dioxide (ECO2R) to formic acid, comparing precipitation and impregnation synthesis methods. Electrodes were characterized using Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), Thermogravimetric Analysis (TGA), Cyclic Voltammetry (CV), Chronoamperometry, and Electrochemical Impedance Spectroscopy (EIS). The precipitation method yielded higher Sn content (91.22%) and superior thermal stability (3% mass loss at 1000°C vs. 45% for impregnation). Morphological analysis through SEM revealed precipitation-synthesized electrodes exhibited more uniform Sn particle distribution across the graphite surface, while impregnation resulted in larger Sn agglomerates with less homogeneous coverage, significantly influencing electroactive surface area and catalytic performance. The electrochemical performance of electrodes was tested using H-cell. CV showed decreased cathodic current for Sn/C electrodes compared to pure graphite in CO2-saturated electrolyte, while chronoamperometry indicated slightly better sustained performance for precipitation-synthesized electrodes with stabilized current densities after 3 hours of operation. EIS analysis suggested the precipitation method yields a marginally lower ohmic resistance (28.8 Ω vs. 29.8 Ω), resulting in a more favorable electrode structure for overall catalytic activity. Both methods showed lower ohmic resistance than that of pure graphite (38.1 Ω), the precipitation-synthesized Sn/C electrode emerged as the preferred selection for ECO2R to formic acid, balancing high Sn content, thermal stability, superior durability, and better Faradaic efficiency. The observed performance differences were attributed to distinct metal-support interactions formed during synthesis, with precipitation creating stronger metal-carbon bonds that enhance stability but potentially limit certain active sites necessary for optimal CO2 reduction kinetics. This comprehensive characterization revealed that the precipitation-synthesized electrode offers the most promising foundation for further development, potentially through process optimization, hybrid synthesis approaches, or targeted doping strategies to enhance catalytic activity while maintaining the advantageous stability characteristics.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2025-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/61280</dc:identifier>
	<dc:identifier>10.61435/ijred.2025.61280</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 14, No 5 (2025): September 2025; 869-881</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/61280/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>