Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Effect of Different Hydrothermal Temperatures on the Properties on Nano-Silica (SiO2) of Rice Husk

International Journal of Renewable Energy Development : JRED · Vol. 11 No. 3 (2022) · hlm. 640–646

DOI
10.14710/ijred.2022.43904
ISSN
2252-4940
Terbit
2022-08-04
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Rice husk has high silica (SiO2) content and can be used as the primary material for making nano-silica. One of the methods for synthesizing nano-silica was the hydrothermal method. The objective of this study was to synthesize nano-silica from rice husks by observing the effect of temperature in the hydrothermal process on the structure, electrical and particle properties of nano-silica. The hydrothermal process temperature was 150, 200, and 250 °C for 4 hours. The results showed that all nano-silicas were in the amorphous phase. The particle size was in the range of 0.16-13.49 nm with more uniform size distribution on nano-silicas of 200 °C and 250 °C than nano-silica at 150 °C. These three nano-silicas were included in the semiconductor category by increasing temperature and frequency. In addition, these treatment variations resulted 200 °C for 4 hours and pressure of 2 atm as the optimum treatment for manufacturing nano-silica of rice husk ash. This nano-silica could be used as semiconductor material for electronic industry.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 139 tautan kepenulisan bersama · 53 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Universitas Halu Oleo
  • Universiti Malaysia Perlis
  • Muhammadiyah University of Yogyakarta
  • Indonesia Open University
  • Universitas Djuanda
  • Bandung Institute of Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti Sarah HajarIPB University5
Pepen ArifinBandung Institute of Technology3
Heriyanto SyafutraIPB University3
Mahfuddin ZuhriIPB University3
Z. JamalAfiliasi tidak diketahui2
Hanedi DarmasetiawanIPB University2
Hendradi HardhienataIPB University2
Muhammad HikamUniversity of Indonesia2
Eti RohaetiIPB University2
Rofiqul UmamKwansei Gakuin University2
Nursaban RommyUniversitas Halu Oleo1
Juharsah JuharsahUniversitas Halu Oleo1
Eliyanti Agus MokodompitUniversitas Halu Oleo1
Alida PalilatiUniversitas Halu Oleo1
Dwi Mita SetyasihUniversitas Yudharta Pasuruan1
Israyati RifqohAfiliasi tidak diketahui1
Utami Dyah SyafitriIPB University1
Nindya WulandariIPB University1
Erfiani ErfianiIPB University1
Widodo WidodoMuhammadiyah University of Yogyakarta1
JamaluddinIndonesia Open University1
Ayuning BudiatiIndonesia Open University1
Sanna TakingUniversiti Malaysia Perlis1
S.N. JusohUniversiti Malaysia Perlis1
M. A. IdrisUniversiti Malaysia Perlis1
Akhiruddin AkhiruddinIPB University1
R. ErviansyahIPB University1
Farida HuriawatiIPB University1
Mohamad RafiIPB University1
Rinaldi IdroesUniversitas Syiah Kuala1
Alfi Hudatul KaromahIPB University1
Dewi Anggraini SeptaningsihIPB University1
Muhammad Miftahul MadyaIPB University1
Taopik RidwanIPB University1
Ihsan NurkomarMuhammadiyah University of Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of Different Hydrothermal Temperatures on the Properties on Nano-Silica (SiO2) of Rice Husk</dc:title>
	<dc:creator>Irzaman, Irzaman</dc:creator>
	<dc:creator>Irmansyah, Irmansyah</dc:creator>
	<dc:creator>Aisyah, Siti</dc:creator>
	<dc:creator>Har, Nazopatul Patonah</dc:creator>
	<dc:creator>Aminullah, Aminullah</dc:creator>
	<dc:subject xml:lang="en-US">Amorphous; hydrothermal; semiconductor; rice husk; nano-silica size</dc:subject>
	<dc:description xml:lang="en-US">Rice husk has high silica (SiO2) content and can be used as the primary material for making nano-silica. One of the methods for synthesizing nano-silica was the hydrothermal method. The objective of this study was to synthesize nano-silica from rice husks by observing the effect of temperature in the hydrothermal process on the structure, electrical and particle properties of nano-silica. The hydrothermal process temperature was 150, 200, and 250 °C for 4 hours. The results showed that all nano-silicas were in the amorphous phase. The particle size was in the range of 0.16-13.49 nm with more uniform size distribution on nano-silicas of 200 °C and 250 °C than nano-silica at 150 °C. These three nano-silicas were included in the semiconductor category by increasing temperature and frequency. In addition, these treatment variations resulted 200 °C for 4 hours and pressure of 2 atm as the optimum treatment for manufacturing nano-silica of rice husk ash. This nano-silica could be used as semiconductor material for electronic industry.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2022-08-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/43904</dc:identifier>
	<dc:identifier>10.14710/ijred.2022.43904</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 11, No 3 (2022): August 2022; 640-646</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/43904/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 The Authors. Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>