Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Influence of Various Basin Types on Performance of Passive Solar Still: A Review

International Journal of Renewable Energy Development : JRED · Vol. 10 No. 4 (2021) · hlm. 789–802

DOI
10.14710/ijred.2021.38394
ISSN
2252-4940
Terbit
2021-11-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Passive solar still is the simplest design for distilling seawater by harnessing solar energy. Although it is undeniable that solar still is a promising device to provide an additional freshwater source for global increasing water demand, low thermal efficiency along with daily distillate yield are its major disadvantages. A conventional solar still can produced 2 to 5 L/m2day. Various studies have been carried out to improve passive solar stills in terms of daily productivity, thermal efficiency, and economic effectiveness. Most of the researches that relate to the daily output improvement of passive solar still concentrates on enhancing evaporation or/and condensation processes. While the condensation process is influenced by wind velocity and characteristics of the condensed surface, the evaporation process is mainly affected by the temperature of basin water. Different parameters affect the brackish water temperature such as solar radiation, design parameters (for example water depth, insulators, basin liner absorptivity, reflectors, sun tracking system, etc). The inclined angle of the top cover is suggested to equal the latitude of the experimental place. Moreover, the decrease of water depth was obtained as a good operational parameter, however, the shallow water depth is required additional feed water for ensuring no dry spot existence. Reflectors and sun-tracking systems help solar still absorb as much solar intensity as possible. The internal reflector can enhance daily yield and efficiency of stepped solar still up to 75% and 56% respectively, whereas, passive solar still with the support of a sun-tracking system improved daily yield up to 22%. Despite large efforts to investigate the impact of the different parameters on passive solar distillation, the effect of the basin liner (including appropriate shapes and type of material), needs to be analyzed for improvement in practical utilization. The present work has reviewed the investigation of the solar still performance with various types of basin liner. The review of solar stills has been conducted critically with rectangular basin, fins basin, corrugated basin, wick type, steps shape, and cylindrical shape basin with variety of top cover shapes. The findings from this work conclude that the basin liner with a cylindrical shape had better performance in comparison with other metal types and provides higher freshwater output. Stepped type, inclined, fin absorber, and corrugated shapes had the efficient performance. Further exploration revealed that copper is the best-used material for the productivity of passive solar still.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 115 tautan kepenulisan bersama · 1 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Diponegoro University
  • Universitas Muhammadiyah Parepare
  • Universitas Nurul Jadid
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Marcelinus ChristwardanaDiponegoro University5
Kusmiyati KusmiyatiAfiliasi tidak diketahui3
Widayat WidayatAfiliasi tidak diketahui3
Arief BudimanAfiliasi tidak diketahui2
Mohammad Hossein AhmadiAfiliasi tidak diketahui2
Thanh Hai TruongAfiliasi tidak diketahui2
Huu Cuong LeAfiliasi tidak diketahui2
Dao Nam CaoAfiliasi tidak diketahui2
Abdullah AbdullahUniversitas Muhammadiyah Parepare1
Hamid HamidAfiliasi tidak diketahui1
Muhamad Maulana Azimatun NurAfiliasi tidak diketahui1
Ganang Dwi HartantoAfiliasi tidak diketahui1
Siti JamilatunAfiliasi tidak diketahui1
R. RochmadiAfiliasi tidak diketahui1
B. BudhijantoAfiliasi tidak diketahui1
Avido YuliestyanAfiliasi tidak diketahui1
Apsari Puspita AiniAfiliasi tidak diketahui1
Achmad RoesyadiAfiliasi tidak diketahui1
A AbdullahUniversitas Nurul Jadid1
H. HargonoAfiliasi tidak diketahui1
Michael Natan SyalomAfiliasi tidak diketahui1
Anrey SetiawanAfiliasi tidak diketahui1
John PhiliaAfiliasi tidak diketahui1
Didi Dwi AnggoroAfiliasi tidak diketahui1
S. SilvianaAfiliasi tidak diketahui1
Cantika Aulia SalsabilaAfiliasi tidak diketahui1
Kevin AprilioAfiliasi tidak diketahui1
Anisa Widia UtamiAfiliasi tidak diketahui1
Afriza Ni'matus Sa'adahAfiliasi tidak diketahui1
Febio DalantaAfiliasi tidak diketahui1
S SumarnoAfiliasi tidak diketahui1
Rufaida Nur RostikaAfiliasi tidak diketahui1
Noer Abyor HandayaniAfiliasi tidak diketahui1
Mohammad Ali AfsharAfiliasi tidak diketahui1
Ali NaseriAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Influence of Various Basin Types on Performance of Passive Solar Still: A Review</dc:title>
	<dc:creator>Le, Tri Hieu</dc:creator>
	<dc:creator>Pham, Minh Tuan</dc:creator>
	<dc:creator>Hadiyanto, H</dc:creator>
	<dc:creator>Pham, Van Viet</dc:creator>
	<dc:creator>Hoang, Anh Tuan</dc:creator>
	<dc:subject xml:lang="en-US">renewable energy; water production; passive solar still; distillate yield; absorber basin</dc:subject>
	<dc:description xml:lang="en-US">Passive solar still is the simplest design for distilling seawater by harnessing solar energy. Although it is undeniable that solar still is a promising device to provide an additional freshwater source for global increasing water demand, low thermal efficiency along with daily distillate yield are its major disadvantages. A conventional solar still can produced 2 to 5 L/m2day. Various studies have been carried out to improve passive solar stills in terms of daily productivity, thermal efficiency, and economic effectiveness. Most of the researches that relate to the daily output improvement of passive solar still concentrates on enhancing evaporation or/and condensation processes. While the condensation process is influenced by wind velocity and characteristics of the condensed surface, the evaporation process is mainly affected by the temperature of basin water. Different parameters affect the brackish water temperature such as solar radiation, design parameters (for example water depth, insulators, basin liner absorptivity, reflectors, sun tracking system, etc). The inclined angle of the top cover is suggested to equal the latitude of the experimental place. Moreover, the decrease of water depth was obtained as a good operational parameter, however, the shallow water depth is required additional feed water for ensuring no dry spot existence. Reflectors and sun-tracking systems help solar still absorb as much solar intensity as possible. The internal reflector can enhance daily yield and efficiency of stepped solar still up to 75% and 56% respectively, whereas, passive solar still with the support of a sun-tracking system improved daily yield up to 22%. Despite large efforts to investigate the impact of the different parameters on passive solar distillation, the effect of the basin liner (including appropriate shapes and type of material), needs to be analyzed for improvement in practical utilization. The present work has reviewed the investigation of the solar still performance with various types of basin liner. The review of solar stills has been conducted critically with rectangular basin, fins basin, corrugated basin, wick type, steps shape, and cylindrical shape basin with variety of top cover shapes. The findings from this work conclude that the basin liner with a cylindrical shape had better performance in comparison with other metal types and provides higher freshwater output. Stepped type, inclined, fin absorber, and corrugated shapes had the efficient performance.  Further exploration revealed that copper is the best-used material for the productivity of passive solar still.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2021-11-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/38394</dc:identifier>
	<dc:identifier>10.14710/ijred.2021.38394</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 10, No 4 (2021): November 2021; 789-802</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/38394/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 The Authors. Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>