Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Development of Formaldehyde Adsorption using Modified Activated Carbon – A Review

International Journal of Renewable Energy Development : JRED · Vol. 1 No. 3 (2012) · hlm. 75–80

DOI
10.14710/ijred.1.3.75-80
ISSN
2252-4940
Terbit
2012-10-30
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng

Abstrak

Gas storage is a technology developed with an adsorptive storage method, in which gases are stored as adsorbed components on the certain adsorbent. Formaldehyde is one of the major indoor gaseous pollutants. Depending on its concentration, formaldehyde may cause minor disorder symptoms to a serious injury. Some of the successful applications of technology for the removal of formaldehyde have been reported. However, this paper presents an overview of several studies on the elimination of formaldehyde that has been done by adsorption method because of its simplicity. The adsorption method does not require high energy and the adsorbent used can be obtained from inexpensive materials. Most researchers used activated carbon as an adsorbent for removal of formaldehyde because of its high adsorption capacity. Activated carbons can be produced from many materials such as coals, woods, or agricultural waste. Some of them were prepared by specific activation methods to improve the surface area. Some researchers also used modified activated carbon by adding specific additive to improve its performance in attracting formaldehyde molecules. Proposed modification methods on activation and additive impregnated carbon are thus discussed in this paper for future development and improvement of formaldehyde adsorption on activated carbon. Specifically, a waste agricultural product is chosen for activated carbon raw material because it is renewable and gives an added value to the materials. The study indicates that the performance of the adsorption of formaldehyde might be improved by using modified activated carbon. Bamboo seems to be the most appropriate raw materials to produce activated carbon combined with applying chemical activation method and addition of metal oxidative catalysts such as Cu or Ag in nano size particles. Bamboo activated carbon can be developed in addition to the capture of formaldehyde as well as the storage of adsorptive hydrogen gas that supports renewable energy. Keywords: adsorption; bamboo; formaldehyde; modified activated carbon; nano size particles

Jaringan kolaborasi para penulis

40 penulis · 113 tautan kepenulisan bersama · 12 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Semarang
  • University of Indonesia
  • Universitas Tidar
  • Kementerian Energi dan Sumber Daya Mineral
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Irawaty IrawatyState University of Semarang2
Widya Hary CahyatiState University of Semarang1
Nurdian SusilowatiState University of Semarang1
Nathanael Christian Satya WijayaState University of Semarang1
Zoeraia Fathia UtamieState University of Semarang1
Amir MahmudState University of Semarang1
Rahma Dhani FatonahState University of Semarang1
Lilis HartatiUniversitas Tidar1
Duhita Driyah SupraptiState University of Semarang1
Dani MuhtadaState University of Semarang1
Yoris Adi MarettaState University of Semarang1
Godham Eko SaputroState University of Semarang1
Aldias BahatmakaState University of Semarang1
Sunyoto SunyotoState University of Semarang1
Eny Widhia AgustinState University of Semarang1
Ladunia RahmahState University of Semarang1
Rangga Dino AlfianState University of Semarang1
Rusiyanto RusiyantoState University of Semarang1
Ria WulansarieState University of Semarang1
Kiki Diyah Ayu UtamiState University of Semarang1
Miftakhul Izza ArinandaState University of Semarang1
Fransisca Widhi MahatmantiState University of Semarang1
Maulida ZakiaState University of Semarang1
Safna Rahma WatiState University of Semarang1
Berliana Putri RahmaliaState University of Semarang1
Dea MaulanaState University of Semarang1
Amelia Putri WidiastutiState University of Semarang1
Laili Nailil MunaState University of Semarang1
Mochamad Brian LaksanaState University of Semarang1
Rizky IchwanState University of Semarang1
Maharani KusumaningrumState University of Semarang1
Ridwan Dani HibatullahState University of Semarang1
Pragusti Lintang Adhi NanggalaState University of Semarang1
Athiya Rihadatul ‘Aisy Qothrun NadaState University of Semarang1
Sri KadarwatiState University of Semarang1
Prima Astuti HandayaniState University of Semarang1
Agung FeinnudinKementerian Energi dan Sumber Daya Mineral1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of Formaldehyde Adsorption using Modified Activated Carbon – A Review</dc:title>
	<dc:creator>Rengga, W.D.P</dc:creator>
	<dc:creator>Sudibandriyo, M.</dc:creator>
	<dc:creator>Nasikin, M</dc:creator>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:description xml:lang="en-US">Gas storage is a technology developed with an adsorptive storage method, in which gases are stored as adsorbed components on the certain adsorbent. Formaldehyde is one of the major indoor gaseous pollutants. Depending on its concentration, formaldehyde may cause minor disorder symptoms to a serious injury. Some of the successful applications of technology for the removal of formaldehyde have been reported. However, this paper presents an overview of several studies on the elimination of formaldehyde that has been done by adsorption method because of its simplicity. The adsorption method does not require high energy and the adsorbent used can be obtained from inexpensive materials. Most researchers used activated carbon as an adsorbent for removal of formaldehyde because of its high adsorption capacity. Activated carbons can be produced from many materials such as coals, woods, or agricultural waste. Some of them were prepared by specific activation methods to improve the surface area. Some researchers also used modified activated carbon by adding specific additive to improve its performance in attracting formaldehyde molecules. Proposed modification methods on activation and additive impregnated carbon are thus discussed in this paper for future development and improvement of formaldehyde adsorption on activated carbon. Specifically, a waste agricultural product is chosen for activated carbon raw material because it is renewable and gives an added value to the materials. The study indicates that the performance of the adsorption of formaldehyde might be improved by using modified activated carbon. Bamboo seems to be the most appropriate raw materials to produce activated carbon combined with applying chemical activation method and addition of metal oxidative catalysts such as Cu or Ag in nano size particles. Bamboo activated carbon can be developed in addition to the capture of formaldehyde as well as the storage of adsorptive hydrogen gas that supports renewable energy. Keywords: adsorption; bamboo; formaldehyde; modified activated carbon; nano size particles</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2012-10-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/4096</dc:identifier>
	<dc:identifier>10.14710/ijred.1.3.75-80</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 1, No 3 (2012): October 2012; 75-80</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/4096/3743</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2012 International Journal of Renewable Energy Development</dc:rights>
</oai_dc:dc>