Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Analysis of a standing wave thermoacoustic engine with multiple unit stages

International Journal of Renewable Energy Development : JRED · Vol. 13 No. 4 (2024) · hlm. 708–715

DOI
10.61435/ijred.2024.60098
ISSN
2252-4940
Terbit
2024-07-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The thermoacoustic engine is an eco-friendly technology capable of harnessing solar and waste energy for electricity generation, in conjunction with a linear alternator, and can function as a heat pump. This engine type holds significant appeal due to its simplistic design, devoid of any mechanical moving components, comprising only a stack sandwiched between heat exchangers within a resonator. When the temperature gradient across the stack reaches the critical threshold (onset temperature), the working gas undergoes spontaneous oscillation. Typically, a high onset temperature is necessary to induce gas oscillation in a thermoacoustic engine due to viscous losses within the system. A method to lower the onset temperature by increasing the number of unit stages consisting of stacks and heat exchangers so that the engine can utilize low-grade thermal sources has been developed to overcome this challenge. However, this method has only been applied to traveling-wave thermoacoustic engines. Its application in standing-wave engines, which offer a more compact and straightforward structure, remains unexplored. This research aims to examine how the number of unit stages in a standing-wave thermoacoustic engine influences the onset temperature and acoustic field. The onset temperature is estimated using a fundamental hydrodynamics equation and the investigation of the acoustic field throughout the engine using DeltaEC software. Results showed that the strategic positioning of multiple unit stages is essential to achieve a low onset temperature. The minimum onset temperature, approximately 92°C, is obtained when three- or four-unit stages are installed. Additionally, increasing the number of unit stages does not affect the acoustic impedance and phase difference between pressure and velocity in the stack, while simultaneously enhancing both acoustic power output and thermal efficiency.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 73 tautan kepenulisan bersama · 49 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Indonesia University of Education
  • State University of Malang
  • Tohoku University
  • Bandung Institute of Technology
  • National Research and Innovation Agency
  • Universiti Sains Malaysia
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Restiani Alia PutriIndonesia University of Education1
Yessi PermanaBandung Institute of Technology1
Istifhamy IrnandaState University of Malang1
Ubed Sonai Fahruddin ArroziState University of Malang1
Yurin Karunia Apsha Albaina IasyaIndonesia University of Education1
Fitri KhoerunnisaIndonesia University of Education1
Sadina Sahitya DwiIndonesia University of Education1
Mita NurhayatiIndonesia University of Education1
Murni HandayaniNational Research and Innovation Agency1
Wen‐Da OhUniversiti Sains Malaysia1
Bagas Wahyu WibowoUniversitas Gadjah Mada1
Rizki Dwi PrasetyaUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of a standing wave thermoacoustic engine with multiple unit stages</dc:title>
	<dc:creator>Murti, Prastowo</dc:creator>
	<dc:creator>Setiawan, Ikhsan</dc:creator>
	<dc:creator>Rosafira, Jihan Zeinyuta</dc:creator>
	<dc:creator>Widyaparaga, Adhika</dc:creator>
	<dc:creator>Astuti, Wijayanti Dwi</dc:creator>
	<dc:creator>Biwa, Tetsushi</dc:creator>
	<dc:subject xml:lang="en-US">thermoacoustic; standing wave;  multiple unit stage;  acoustic field; onset temperature.</dc:subject>
	<dc:description xml:lang="en-US">The thermoacoustic engine is an eco-friendly technology capable of harnessing solar and waste energy for electricity generation, in conjunction with a linear alternator, and can function as a heat pump. This engine type holds significant appeal due to its simplistic design, devoid of any mechanical moving components, comprising only a stack sandwiched between heat exchangers within a resonator. When the temperature gradient across the stack reaches the critical threshold (onset temperature), the working gas undergoes spontaneous oscillation. Typically, a high onset temperature is necessary to induce gas oscillation in a thermoacoustic engine due to viscous losses within the system. A method to lower the onset temperature by increasing the number of unit stages consisting of stacks and heat exchangers so that the engine can utilize low-grade thermal sources has been developed to overcome this challenge. However, this method has only been applied to traveling-wave thermoacoustic engines. Its application in standing-wave engines, which offer a more compact and straightforward structure, remains unexplored. This research aims to examine how the number of unit stages in a standing-wave thermoacoustic engine influences the onset temperature and acoustic field. The onset temperature is estimated using a fundamental hydrodynamics equation and the investigation of the acoustic field throughout the engine using DeltaEC software. Results showed that the strategic positioning of multiple unit stages is essential to achieve a low onset temperature. The minimum onset temperature, approximately 92°C, is obtained when three- or four-unit stages are installed. Additionally, increasing the number of unit stages does not affect the acoustic impedance and phase difference between pressure and velocity in the stack, while simultaneously enhancing both acoustic power output and thermal efficiency.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2024-07-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/60098</dc:identifier>
	<dc:identifier>10.61435/ijred.2024.60098</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 13, No 4 (2024): July 2024; 708-715</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/60098/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>