Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Immobilized L-arginine on methacrylate polymer as reusable heterogeneous catalyst for crude palm oil transesterification

International Journal of Renewable Energy Development : JRED · Vol. 15 No. 3 (2026) · hlm. 522–531

DOI
10.61435/ijred.2026.61761
ISSN
2252-4940
Terbit
2026-05-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The development of enviromentally friendly and reusable heterogenous catalyst has attracted significant attention for sustainable biodiesel production from low-cost feedstocks such as crude palm oil (CPO). This study aims to synthesize and evaluate an L-arginine immobilized methacrylate-based porous polymer as an efficient and reusable heterogenous base catalyst for CPO transesterification. In this study, a porous polymer synthesized from glycidyl methacrylate (GM) and ethylene glycol dimethacrylate (EGD), denoted as poly(GM-co-EGD), was employed as a support matrix for L-arginine immobilization to develop an efficient heterogeneous base catalyst for the transesterification of CPO. The catalyst was prepared via free radical polymerization followed by covalent immobilization of L-arginine onto the porous polymer framework. FESEM analysis revealed a well-developed interconnected porous morphology, which was further supported by textural characterization showing a high BET surface area of 650 m² g⁻¹ and a total pore volume of 2.07 cm³ g⁻¹. FTIR spectra confirmed the successful chemical bonding between L-arginine and the polymer matrix. Thermogravimetric analysis indicated good thermal stability of the polymeric catalyst up to 120 °C, suitable for transesterification conditions. The basic strength evaluated using Hammett indicators showed moderate-to-strong basicity (9.9 < H_ < 12), while quantitative back titration with benzoic acid revealed that the catalyst with a poly(GM-co-EGD):L-arginine ratio of 1:2 exhibited the highest total basicity of 1.01 mmol g⁻¹. Process optimization using Response Surface Methodology with a Box–Behnken design produced a highly accurate quadratic model (R² = 0.9992). Under optimal conditions, a biodiesel yield of 82.34 ± 1.08% was achieved, consistent with model predictions. The catalyst maintained stable performance over five consecutive cycles, demonstrating its potential as a green and sustainable catalyst for biodiesel production from CPO.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 42 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Brawijaya
  • Universitas Bojonegoro
  • IPB University
  • Universitas Flores
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Warsito WarsitoUniversity of Brawijaya2
Salma Iza FadhilaUniversity of Brawijaya1
Elok Kamilah HayatiUniversity of Brawijaya1
Mohamad RafiIPB University1
Krista Firdaus Suwarno PutriUniversity of Brawijaya1
Hermin SulistyartiUniversity of Brawijaya1
Barlah RumhayatiUniversity of Brawijaya1
Ulfa AndayaniUniversity of Brawijaya1
Layta DiniraUniversity of Brawijaya1
Vina Octavia AzzahraUniversity of Brawijaya1
Desytrifa Rosenny OmpusungguUniversity of Brawijaya1
Dwi Nanda Cakra WigunaUniversity of Brawijaya1
Fadhil Akbar SugiartoUniversity of Brawijaya1
Damiana Nofita BirhiUniversitas Flores1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Immobilized L-arginine on methacrylate polymer as reusable heterogeneous catalyst for crude palm oil transesterification</dc:title>
	<dc:creator>Erwanto, Erwanto</dc:creator>
	<dc:creator>Warsito, Warsito</dc:creator>
	<dc:creator>Sabarudin, Akhmad</dc:creator>
	<dc:creator>Mardiana, Diah</dc:creator>
	<dc:creator>Iftitah, Elvina Dhiaul</dc:creator>
	<dc:subject xml:lang="en-US">L-Arginine; Immobilization; Polymer; Box Behnken Design; transesterification.</dc:subject>
	<dc:description xml:lang="en-US">The development of enviromentally friendly and reusable heterogenous catalyst has attracted significant attention for sustainable biodiesel production from low-cost feedstocks such as crude palm oil (CPO). This study aims to synthesize and evaluate an L-arginine immobilized methacrylate-based porous polymer as an efficient and reusable heterogenous base catalyst for CPO transesterification. In this study, a porous polymer synthesized from glycidyl methacrylate (GM) and ethylene glycol dimethacrylate (EGD), denoted as poly(GM-co-EGD), was employed as a support matrix for L-arginine immobilization to develop an efficient heterogeneous base catalyst for the transesterification of CPO. The catalyst was prepared via free radical polymerization followed by covalent immobilization of L-arginine onto the porous polymer framework. FESEM analysis revealed a well-developed interconnected porous morphology, which was further supported by textural characterization showing a high BET surface area of 650 m² g⁻¹ and a total pore volume of 2.07 cm³ g⁻¹. FTIR spectra confirmed the successful chemical bonding between L-arginine and the polymer matrix. Thermogravimetric analysis indicated good thermal stability of the polymeric catalyst up to 120 °C, suitable for transesterification conditions. The basic strength evaluated using Hammett indicators showed moderate-to-strong basicity (9.9 &lt; H_ &lt; 12), while quantitative back titration with benzoic acid revealed that the catalyst with a poly(GM-co-EGD):L-arginine ratio of 1:2 exhibited the highest total basicity of 1.01 mmol g⁻¹. Process optimization using Response Surface Methodology with a Box–Behnken design produced a highly accurate quadratic model (R² = 0.9992). Under optimal conditions, a biodiesel yield of 82.34 ± 1.08% was achieved, consistent with model predictions. The catalyst maintained stable performance over five consecutive cycles, demonstrating its potential as a green and sustainable catalyst for biodiesel production from CPO.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2026-05-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/61761</dc:identifier>
	<dc:identifier>10.61435/ijred.2026.61761</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 15, No 3 (2026): May 2026; 522-531</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>info:eu-repo/grantAgreement/EC/FP7/104617</dc:relation>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/61761/pdf</dc:relation>
	<dc:rights xml:lang="en-US">info:eu-repo/semantics/openAccess</dc:rights>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>