Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Computational Fluid Dynamics Study of Turbulence, Radiation, and Combustion Models for Natural Gas Combustion Burner

Bulletin of Chemical Reaction Engineering & Catalysis · Vol. ume (2018) · hlm. 155–169

DOI
10.9767/bcrec.13.1.1395.155-169
ISSN
1978-2993
Terbit
2018-04-02
Penerbit
Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents a Computational Fluid Dynamics (CFD) study of a natural gas combustion burner focusing on the effect of combustion, thermal radiation and turbulence models on the temperature and chemical species concentration fields. The combustion was modelled using the finite rate/eddy dissipation (FR/EDM) and partially premixed flame models. Detailed chemistry kinetics CHEMKIN GRI-MECH 3.0 consisting of 325 reactions was employed to model the methane combustion. Discrete ordinates (DO) and spherical harmonics (P1) model were employed to predict the thermal radiation. The gas absorption coefficient dependence on the wavelength is resolved by the weighted-sum-of-gray-gases model (WSGGM). Turbulence flow was simulated using Reynolds-averaged Navier-Stokes (RANS) based models. The findings showed that a combination of partially premixed flame, P1 and standard k-ε (SKE) gave the most accurate prediction with an average deviation of around 7.8% of combustion temperature and 15.5% for reactant composition (methane and oxygen). The results show the multi-step chemistry in the partially premixed model is more accurate than the two-step FR/EDM. Meanwhile, inclusion of thermal radiation has a minor effect on the heat transfer and species concentration. SKE turbulence model yielded better prediction compared to the realizable k-ε (RKE) and renormalized k-ε (RNG). The CFD simulation presented in this work may serve as a useful tool to evaluate a performance of a natural gas combustor.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 23 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Malaysia Pahang Al-Sultan Abdullah
  • Tunku Abdul Rahman University of Management and Technology
  • Universiti Teknologi Petronas
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Chin Kui ChengUniversiti Malaysia Pahang Al-Sultan Abdullah3
Kah Weng SiewUniversiti Malaysia Pahang Al-Sultan Abdullah2
Hua Chyn LeeUniversiti Malaysia Pahang Al-Sultan Abdullah2
Bamidele Victor AyodeleUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohd Nasir Nor ShahirahUniversiti Malaysia Pahang Al-Sultan Abdullah1
Mohammad Tazli AzizanUniversiti Teknologi Petronas1
Sumaiya Zainal AbidinUniversiti Malaysia Pahang Al-Sultan Abdullah1
Norazimah HarunUniversiti Malaysia Pahang Al-Sultan Abdullah1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.bcrec.id/index.php/bcrec/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Computational Fluid Dynamics Study of Turbulence, Radiation, and Combustion Models for Natural Gas Combustion Burner</dc:title>
	<dc:creator>Pang, Yik Siang</dc:creator>
	<dc:creator>Law, Woon Phui</dc:creator>
	<dc:creator>Pung, Kang Qin</dc:creator>
	<dc:creator>Gimbun, Jolius</dc:creator>
	<dc:subject xml:lang="en-US">Combustion; Partially Premixed; Radiation; Turbulence; CFD</dc:subject>
	<dc:description xml:lang="en-US">This paper presents a Computational Fluid Dynamics (CFD) study of a natural gas combustion burner focusing on the effect of combustion, thermal radiation and turbulence models on the temperature and chemical species concentration fields. The combustion was modelled using the finite rate/eddy dissipation (FR/EDM) and partially premixed flame models. Detailed chemistry kinetics CHEMKIN GRI-MECH 3.0 consisting of 325 reactions was employed to model the methane combustion. Discrete ordinates (DO) and spherical harmonics (P1) model were employed to predict the thermal radiation. The gas absorption coefficient dependence on the wavelength is resolved by the weighted-sum-of-gray-gases model (WSGGM). Turbulence flow was simulated using Reynolds-averaged Navier-Stokes (RANS) based models. The findings showed that a combination of partially premixed flame, P1 and standard k-ε (SKE) gave the most accurate prediction with an average deviation of around 7.8% of combustion temperature and 15.5% for reactant composition (methane and oxygen). The results show the multi-step chemistry in the partially premixed model is more accurate than the two-step FR/EDM. Meanwhile, inclusion of thermal radiation has a minor effect on the heat transfer and species concentration. SKE turbulence model yielded better prediction compared to the realizable k-ε (RKE) and renormalized k-ε (RNG). The CFD simulation presented in this work may serve as a useful tool to evaluate a performance of a natural gas combustor. </dc:description>
	<dc:publisher xml:lang="en-US">Masyarakat Katalis Indonesia - Indonesian Catalyst Society (MKICS)</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-04-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.bcrec.id/index.php/bcrec/article/view/1395</dc:identifier>
	<dc:identifier>10.9767/bcrec.13.1.1395.155-169</dc:identifier>
	<dc:source xml:lang="en-US">Bulletin of Chemical Reaction Engineering &amp; Catalysis; 2018: BCREC Volume 13 Issue 1 Year 2018 (April 2018); 155-169</dc:source>
	<dc:source>1978-2993</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/view/1395/1290</dc:relation>
	<dc:relation>https://journal.bcrec.id/index.php/bcrec/article/downloadSuppFile/1395/285</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 by Authors, Published by BCREC Group</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>