Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 2

Eco-printing Leather Quality in Different Mordant Methods

JITRO (Jurnal Ilmu dan Teknologi Peternakan Tropis) · Vol. 9 No. 2 (2022) · hlm. 556–560

DOI
10.33772/jitro.v9i2.23938
ISSN
2406-9337
Terbit
2022-05-31
Penerbit
Universitas Halu Oleo
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The leather coloring technique using the eco-printing method is carried out by transferring the colors and motifs of plants on the leather media by direct contact. This process requires mordant to maximize the color. The use of mordant is done in 3 ways, namely mordant is done at the beginning (pre-mordanting), mordant is done simultaneously (meta-mordanting), and mordant is done at the end (post-mordanting). This study aims to determine the quality of eco-printing leather with the implementation of different mordant methods. The research materials were 16 pieces of sheep’s crust leather. The research treatment was using various mordant methods, namely pre-mordanting, meta-mordanting, and post-mordanting. Colorfastness, tensile strength, elongation, tear strength, flexibility, and fracture resistance were among the eco-printing leather qualities evaluated. The research was carried out in an experimental setting using a completely randomized design. To conclude, the best mordant method was carried out at the beginning of the eco-printing process on leather media (pre-mordanting), where the quality of eco-printing leather obtained of 5.44±0.968 mm, crack resistance (distance) of 8,78±0.97 mm, the tensile strength of 1743.64 ±45.26 N/cm2, leather elongation of 55.15±10.26 %, tear strength of 268.24±132.49 N/cm, sewing strength of 1247.12± 649.91 N/cm, colorfastness of wet rubbing rated 4 (good), and dry rub of 4 (good).Keywords: quality, eco-printing leather, crust leather, mordant technique, tanned leather

Jaringan kolaborasi para penulis

7 penulis · 9 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Muhammadiyah Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Lili ZalizarAfiliasi tidak diketahui1
Rahayu RelawatiAfiliasi tidak diketahui1
Erny IshartatiUniversitas Muhammadiyah Malang1
Titiek AmbarwatiUniversitas Muhammadiyah Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ojs.uho.ac.id/index.php/peternakan-tropis/oai, pertama di-harvest 29 Okt 2026, terakhir terlihat 15 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Eco-printing Leather Quality in Different Mordant Methods</dc:title>
	<dc:creator>Pancapalaga, Wehandaka</dc:creator>
	<dc:creator>Hartati, Endan Sri</dc:creator>
	<dc:creator>Hidayati, Asmah</dc:creator>
	<dc:description xml:lang="en-US">The leather coloring technique using the eco-printing method is carried out by transferring the colors and motifs of plants on the leather media by direct contact. This process requires mordant to maximize the color. The use of mordant is done in 3 ways, namely mordant is done at the beginning (pre-mordanting), mordant is done simultaneously (meta-mordanting), and mordant is done at the end (post-mordanting). This study aims to determine the quality of eco-printing leather with the implementation of different mordant methods. The research materials were 16 pieces of sheep’s crust leather. The research treatment was using various mordant methods, namely pre-mordanting, meta-mordanting, and post-mordanting. Colorfastness, tensile strength, elongation, tear strength, flexibility, and fracture resistance were among the eco-printing leather qualities evaluated. The research was carried out in an experimental setting using a completely randomized design. To conclude, the best mordant method was carried out at the beginning of the eco-printing process on leather media (pre-mordanting), where the quality of eco-printing leather obtained of 5.44±0.968 mm, crack resistance (distance) of 8,78±0.97 mm, the tensile strength of   1743.64 ±45.26 N/cm2, leather elongation of 55.15±10.26 %, tear strength of 268.24±132.49 N/cm, sewing strength of 1247.12± 649.91 N/cm, colorfastness of wet rubbing rated 4 (good), and dry rub of 4 (good).Keywords: quality, eco-printing leather, crust leather, mordant technique, tanned leather</dc:description>
	<dc:publisher xml:lang="en-US">Universitas Halu Oleo</dc:publisher>
	<dc:contributor xml:lang="en-US">university of muhammadiyah malang</dc:contributor>
	<dc:date>2022-05-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ojs.uho.ac.id/index.php/peternakan-tropis/article/view/23938</dc:identifier>
	<dc:identifier>10.33772/jitro.v9i2.23938</dc:identifier>
	<dc:source xml:lang="en-US">Jurnal Ilmu dan Teknologi Peternakan Tropis; Vol 9, No 2 (2022): JITRO, May 2022; 556-560</dc:source>
	<dc:source>2406-9337</dc:source>
	<dc:source>10.33772/jitro.v9i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ojs.uho.ac.id/index.php/peternakan-tropis/article/view/23938/pdf</dc:relation>
	<dc:relation>https://ojs.uho.ac.id/index.php/peternakan-tropis/article/downloadSuppFile/23938/english%20article</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 JITRO (Jurnal Ilmu dan Teknologi Peternakan Tropis)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>