Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimizing the Composition of Basalt and Heat Treatment of Fly Ash-Based Mullite Ceramics Using the Taguchi Method

INDONESIAN JOURNAL OF APPLIED PHYSICS · Vol. 14 No. 1 (2024) · hlm. 127–140

DOI
10.13057/ijap.v14i1.76472
ISSN
2477-6416, 2089-0133
Terbit
2024-05-02
Penerbit
Department of Physics, Sebelas Maret University
Bahasa
eng

Abstrak

The development of industrial activities has an impact on the increase in waste produced, and fly ash, aluminum dross, and basalt dust are no exception. This research studies the potential of these three materials as ceramic materials. Basalt dust from East Lampung was used as filler. The effect on the physical and mechanical properties of mullite (3Al2O3-2SiO2) ceramics was studied. The manufacture of mullite ceramics based on Taguchi design includes fly ash compositions of 40%, 50%, and 60% and basalt content of 0%, 5%, and 10%. sintering temperatures of 600°C, 900°C, and 1,200°C. Taguchi and Anova were used to determine the effect of independent variables on hardness and density. In addition, macro and microphoto tests were carried out to determine the physical and topographic changes of mullite ceramics. Chemical composition tests with X-ray fluorescence were carried out on raw materials and ceramics that have been formed. Changes in the crystal phase in mullite ceramics were studied through the X-ray diffragment test. XRF test results obtained for raw fly ash (SiO2 + Al2O3 + Fe2O3): 84.84 wt%. The composition of raw basalt is predominantly 48.42% SiO2, 18.82% Al2O3, 12.60% Fe2O3, and raw aluminum dross with 67.821% Al2O3 content. The mullite ceramic specimen consists of 38.24–45.30% SiO2, 34.72–48.73% Al2O3, 6.3–9.99% Fe2O3, and 2.31–5.31% CaO. The crystal phases formed are mullite, pyroxene, and diopside. Analysis of variance shows that hardness is significantly affected by sintering temperature, with a P-value of 0.013 and a contribution of 93.77%. This modeling is acceptable with an error value of 1.26%, or R-sq: 98.74%. The addition of basalt increases the density of mullite ceramics, with a P-value of 0.033 and a contribution of 96.05%. The addition of basalt as a filler is not able to increase the hardness significantly, but it affects the higher ceramic density value. However, the formation of mullite is interesting to study further as a refractory material

Kata kunci

Jaringan kolaborasi para penulis

17 penulis · 50 tautan kepenulisan bersama · 38 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indonesian Institute of Sciences
  • Universitas Malahayati
  • National Research and Innovation Agency
  • Universitas Gadjah Mada
  • Tarumanagara University
  • Indonesian Agency for Agricultural Research and Development
  • National Nuclear Energy Agency of Indonesia
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muhammad Al MuttaqiiNational Research and Innovation Agency3
Kusno IsnugrohoIndonesian Institute of Sciences3
David Candra BirawidhaIndonesian Institute of Sciences3
Muhammad Nasir AminIndonesian Institute of Sciences2
Junita BarusIndonesian Agency for Agricultural Research and Development2
Muhammad AminIndonesian Institute of Sciences2
Widi AstutiNational Research and Innovation Agency1
Harsojo SabarmanUniversitas Gadjah Mada1
Iman SantosoUniversitas Gadjah Mada1
Rajiman RajimanNational Nuclear Energy Agency of Indonesia1
Saparudin SaparudinTarumanagara University1
Sofia Wangsadinata AlisjahbanaTarumanagara University1
Ilyas SadadLampung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.uns.ac.id/ijap/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Optimizing the Composition of Basalt and Heat Treatment of Fly Ash-Based Mullite Ceramics Using the Taguchi Method</dc:title>
	<dc:creator>Rajagukguk, Tumpal Ojahan</dc:creator>
	<dc:creator>Ansori, Anang</dc:creator>
	<dc:creator>Ardiyansyah, Ferdy -</dc:creator>
	<dc:creator>Hendronursito, Yusup</dc:creator>
	<dc:subject xml:lang="en-US">Fly Ash; Aluminum Dross; Basalt; Ceramics; Mullite; Hardness</dc:subject>
	<dc:description xml:lang="en-US">The development of industrial activities has an impact on the increase in waste produced, and fly ash, aluminum dross, and basalt dust are no exception. This research studies the potential of these three materials as ceramic materials. Basalt dust from East Lampung was used as filler. The effect on the physical and mechanical properties of mullite (3Al2O3-2SiO2) ceramics was studied. The manufacture of mullite ceramics based on Taguchi design includes fly ash compositions of 40%, 50%, and 60% and basalt content of 0%, 5%, and 10%. sintering temperatures of 600°C, 900°C, and 1,200°C. Taguchi and Anova were used to determine the effect of independent variables on hardness and density. In addition, macro and microphoto tests were carried out to determine the physical and topographic changes of mullite ceramics. Chemical composition tests with X-ray fluorescence were carried out on raw materials and ceramics that have been formed. Changes in the crystal phase in mullite ceramics were studied through the X-ray diffragment test. XRF test results obtained for raw fly ash (SiO2 + Al2O3 + Fe2O3): 84.84 wt%. The composition of raw basalt is predominantly 48.42% SiO2, 18.82% Al2O3, 12.60% Fe2O3, and raw aluminum dross with 67.821% Al2O3 content. The mullite ceramic specimen consists of 38.24–45.30% SiO2, 34.72–48.73% Al2O3, 6.3–9.99% Fe2O3, and 2.31–5.31% CaO. The crystal phases formed are mullite, pyroxene, and diopside. Analysis of variance shows that hardness is significantly affected by sintering temperature, with a P-value of 0.013 and a contribution of 93.77%. This modeling is acceptable with an error value of 1.26%, or R-sq: 98.74%. The addition of basalt increases the density of mullite ceramics, with a P-value of 0.033 and a contribution of 96.05%. The addition of basalt as a filler is not able to increase the hardness significantly, but it affects the higher ceramic density value. However, the formation of mullite is interesting to study further as a refractory material</dc:description>
	<dc:publisher xml:lang="en-US">Department of Physics, Sebelas Maret University</dc:publisher>
	<dc:contributor xml:lang="en-US">Yusup Hendronursito, Badan Risen dan Inovasi Nasional-Pusat Riset Teknologi Pertambangan</dc:contributor>
	<dc:date>2024-05-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.uns.ac.id/ijap/article/view/76472</dc:identifier>
	<dc:identifier>10.13057/ijap.v14i1.76472</dc:identifier>
	<dc:source xml:lang="en-US">INDONESIAN JOURNAL OF APPLIED PHYSICS; Vol 14, No 1 (2024): April; 127-140</dc:source>
	<dc:source>2477-6416</dc:source>
	<dc:source>2089-0133</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.uns.ac.id/ijap/article/view/76472/45236</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 INDONESIAN JOURNAL OF APPLIED PHYSICS</dc:rights>
</oai_dc:dc>