Akses terbuka
Jurnal
SINTA 1
Enhancing microbial fuel cell performance with carbon powder electrode modifications for low-power sensors modules
International Journal of Renewable Energy Development : JRED · Vol. 13 No. 1 (2024) · hlm. 80–87
ISSN 2252-4940
Terbit 2024-01-01
Penerbit Center of Biomass & Renewable Energy (CBIORE)
Bahasa eng
Abstrak
Microbial Fuel Cell (MFC) is a promising technology for harnessing energy from organic compounds. However, the low power generation of MFCs remains a significant challenge that hinders their commercial viability. In this study, we reported three distinct modifications to the stainless-steel mesh (SSM), carbon cloth, and carbon felt electrodes using carbon powder (CP), a mixture of CP and ferrum, and a blend of CP with sodium citrate and ethanol. The MFC equipped with an SSM and CP anode showed a notable power density of 1046.89 mW.m-2. In comparison, the bare SSM anode achieved a maximum power density of 145.8 mW m-2. Remarkably, the 3D-modified SSM with a CP anode (3D-SSM-CP) MFC exhibited a substantial breakthrough, attaining a maximum power density of 1417.07 mW m-2. This achievement signifies a significant advancement over the performance of the unaltered SSM anode, underscoring the effectiveness of our modification approach. Subsequently, the 3D-SSM-CP electrode was integrated into single-chamber MFCs, which were used to power a LoRaWAN IoT device through a power management system. The modification methods improved the MFC performance while involving low-cost and easy fabricating techniques. The results of this study are expected to contribute to improving MFC's performance, bringing them closer to becoming a practical source of renewable energy.
Jaringan kolaborasi para penulis
19 penulis ·
48 tautan kepenulisan bersama
· 29 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Multimedia University University of Science and Technology MILA University Xiamen University Malaysia University of Technology Malaysia MIMOS (Malaysia) GITAM University Organisasi lain Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Enhancing microbial fuel cell performance with carbon powder electrode modifications for low-power sensors modules</dc:title>
<dc:creator>Al-badani, Mohammed Adel</dc:creator>
<dc:creator>Chong, Peng Lean</dc:creator>
<dc:creator>Lim, Heng Siong</dc:creator>
<dc:subject xml:lang="en-US">Anode Modification; Carbon Powder; Internet of Things (IoT); Microbial Fuel Cell; Power Management Systems; Renewable Energy; Stainless-Steel Mesh.</dc:subject>
<dc:description xml:lang="en-US">Microbial Fuel Cell (MFC) is a promising technology for harnessing energy from organic compounds. However, the low power generation of MFCs remains a significant challenge that hinders their commercial viability. In this study, we reported three distinct modifications to the stainless-steel mesh (SSM), carbon cloth, and carbon felt electrodes using carbon powder (CP), a mixture of CP and ferrum, and a blend of CP with sodium citrate and ethanol. The MFC equipped with an SSM and CP anode showed a notable power density of 1046.89 mW.m-2. In comparison, the bare SSM anode achieved a maximum power density of 145.8 mW m-2. Remarkably, the 3D-modified SSM with a CP anode (3D-SSM-CP) MFC exhibited a substantial breakthrough, attaining a maximum power density of 1417.07 mW m-2. This achievement signifies a significant advancement over the performance of the unaltered SSM anode, underscoring the effectiveness of our modification approach. Subsequently, the 3D-SSM-CP electrode was integrated into single-chamber MFCs, which were used to power a LoRaWAN IoT device through a power management system. The modification methods improved the MFC performance while involving low-cost and easy fabricating techniques. The results of this study are expected to contribute to improving MFC's performance, bringing them closer to becoming a practical source of renewable energy.</dc:description>
<dc:publisher xml:lang="en-US">Center of Biomass & Renewable Energy (CBIORE)</dc:publisher>
<dc:date>2024-01-01</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/58977</dc:identifier>
<dc:identifier>10.14710/ijred.2024.58977</dc:identifier>
<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 13, No 1 (2024): January 2024; 80-87</dc:source>
<dc:source>2252-4940</dc:source>
<dc:language>eng</dc:language>
<dc:relation>info:eu-repo/grantAgreement/EC/FP7/359034</dc:relation>
<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/58977/pdf</dc:relation>
<dc:rights xml:lang="en-US">info:eu-repo/semantics/openAccess</dc:rights>
<dc:rights xml:lang="en-US">Copyright (c) 2024 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Al-badani, M. A., Chong, P. L., & Lim, H. S. (2024). Enhancing microbial fuel cell performance with carbon powder electrode modifications for low-power sensors modules. International Journal of Renewable Energy Development : JRED, 13(1), 80–87. https://doi.org/10.14710/ijred.2024.58977
Salin
IEEE
M. A. Al-badani, P. L. Chong, and H. S. Lim, “Enhancing microbial fuel cell performance with carbon powder electrode modifications for low-power sensors modules,” International Journal of Renewable Energy Development : JRED, vol. 13, no. 1, pp. 80–87, 2024, doi: 10.14710/ijred.2024.58977.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.