Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Comparison of lithium sources on the electrochemical performance of LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries

International Journal of Renewable Energy Development : JRED · Vol. 13 No. 3 (2024) · hlm. 448–456

DOI
10.61435/ijred.2024.59662
ISSN
2252-4940
Terbit
2024-05-01
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In order to fulfill the demand for high energy and capacity, an electrode with high-voltage capability, namely LiNi0.5Mn1.5O4 (LNMO) that has an operating potential of up to 4.7 V vs Li/Li+, is currently becoming popular in Li-ion battery chemistries. This research produced LNMO by using a solid-state method with only one-step synthesis route to compare its electrochemical performance with different lithium sources, including hydroxide (LNMO-LiOH), acetate (LNMO-LiAce), and carbonate (LNMO-LiCar) precursors. TGA/DSC was first performed for all three sample precursors to ensure the optimal calcination temperature, while XRD and SEM characterized the physical properties. The electrochemical measurements, including cyclic voltammetry and charge-discharge, were conducted in the half-cell configurations of LNMO//Li-metal using a standard 1 M LiPF6 electrolyte. LNMO-LiOH samples exhibited the highest purity and the smallest particle size, with values of 93.3% and 418 nm, respectively. In contrast, samples with higher impurities, such as LNMO-LiCar, mainly in the form of LixNi1-xO (LiNiO), displayed the largest particle size. The highest working voltage possessed by LNMO-LiOH samples was 4.735 V vs Li/Li+. The results showed that LNMO samples with LiNiO impurities would affect the reaction behavior that occurs at the cathode-electrolyte interface during the release of lithium-ions, resulting in high resistance at the battery operations and decreasing the specific capacity of the LNMO during discharging. The highest value, shown by LNMO-LiOH, was up to 92.75 mAh/g. On the other side, LNMO-LiCar only possessed a specific capacity of 44.57 mAh/g, indicating a significant impact of different lithium sources in the overall performances of LNMO cathode.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 67 tautan kepenulisan bersama · 41 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pertamina
  • National Research and Innovation Agency
  • National Nuclear Energy Agency of Indonesia
  • Universitas Gadjah Mada
  • National Taiwan University of Science and Technology
  • Pertamina (Indonesia)
  • University of Indonesia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Fadila Arum RamadhaniAfiliasi tidak diketahui1
Haryo Satriya OktavianoPertamina (Indonesia)1
Nur Layli AmanahNational Taiwan University of Science and Technology1
Alsello Diveni ManuputtyUniversitas Pertamina1
Dita FloresyonaUniversitas Pertamina1
Agung NugrohoUniversitas Pertamina1
Evvy KartiniNational Nuclear Energy Agency of Indonesia1
Teguh Yulius Surya Panca PutraNational Nuclear Energy Agency of Indonesia1
Yustinus PurwamargapratalaNational Research and Innovation Agency1
Anne ZulfiaUniversity of Indonesia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Comparison of lithium sources on the electrochemical performance of LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries</dc:title>
	<dc:creator>Sudaryanto, Sudaryanto</dc:creator>
	<dc:creator>Salsabila, Nadhifah</dc:creator>
	<dc:creator>Sari, Puspita Ayu Kusuma</dc:creator>
	<dc:creator>Fachrudin, Adinandra Caesar</dc:creator>
	<dc:creator>Salsabila, Adinda Atalya</dc:creator>
	<dc:creator>Nursanto, Eduardus Budi</dc:creator>
	<dc:creator>Priyono, Slamet</dc:creator>
	<dc:creator>Jodi, Heri</dc:creator>
	<dc:creator>Gumelar, Muhammad Dikdik</dc:creator>
	<dc:subject xml:lang="en-US">Li-ion Battery; Cathode; LNMO; Precursor; Solid-State</dc:subject>
	<dc:description xml:lang="en-US">In order to fulfill the demand for high energy and capacity, an electrode with high-voltage capability, namely LiNi0.5Mn1.5O4 (LNMO) that has an operating potential of up to 4.7 V vs Li/Li+, is currently becoming popular in Li-ion battery chemistries. This research produced LNMO by using a solid-state method with only one-step synthesis route to compare its electrochemical performance with different lithium sources, including hydroxide (LNMO-LiOH), acetate (LNMO-LiAce), and carbonate (LNMO-LiCar) precursors. TGA/DSC was first performed for all three sample precursors to ensure the optimal calcination temperature, while XRD and SEM characterized the physical properties. The electrochemical measurements, including cyclic voltammetry and charge-discharge, were conducted in the half-cell configurations of LNMO//Li-metal using a standard 1 M LiPF6 electrolyte. LNMO-LiOH samples exhibited the highest purity and the smallest particle size, with values of 93.3% and 418 nm, respectively. In contrast, samples with higher impurities, such as LNMO-LiCar, mainly in the form of LixNi1-xO (LiNiO), displayed the largest particle size. The highest working voltage possessed by LNMO-LiOH samples was 4.735 V vs Li/Li+. The results showed that LNMO samples with LiNiO impurities would affect the reaction behavior that occurs at the cathode-electrolyte interface during the release of lithium-ions, resulting in high resistance at the battery operations and decreasing the specific capacity of the LNMO during discharging. The highest value, shown by LNMO-LiOH, was up to 92.75 mAh/g. On the other side, LNMO-LiCar only possessed a specific capacity of 44.57 mAh/g, indicating a significant impact of different lithium sources in the overall performances of LNMO cathode.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:date>2024-05-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/59662</dc:identifier>
	<dc:identifier>10.61435/ijred.2024.59662</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 13, No 3 (2024): May 2024; 448-456</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/59662/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 The Author(s). Published by Centre of Biomass and Renewable Energy (CBIORE)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>