Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Comparative Analysis of Biodiesels from Calabash and Rubber Seeds Oils

International Journal of Renewable Energy Development : JRED · Vol. 4 No. 2 (2015) · hlm. 131–136

DOI
10.14710/ijred.4.2.131-136
ISSN
2252-4940
Terbit
2015-07-15
Penerbit
Center of Biomass & Renewable Energy (CBIORE)
Bahasa
eng

Abstrak

Physicochemical properties of biodiesel from vegetable oils depend on the inherent properties of the oil-producing seeds. The purpose of this study is to investigate the physicochemical properties of biodiesels extracted from calabash and rubber seeds oils, as well as their combined oil mixtures with a view to ascertaining the most suitable for biodiesel production. Calabash and rubber seeds oils were separately extracted through the use of a mechanical press with periodic addition of water. Biodiesels were produced from each category of the oils by transesterification of the free fatty acid (FFA) with alcohol under the influence of a catalyst in batch process. The physicochemical properties of the biodiesels were investigated and comparatively analysed. The results obtained indicated an average of 1.40 wt% FFA for biodiesel produced from the purified calabash oil, which has a specific gravity of 0.920, pH of 5.93, flash point of 116 0C, fire point of 138 0C, cloud point of 70 0C, pour point of -4 0C, moisture content of 0.82 wt% and specific heat capacity of 5301 J/kgK. Conversely, the results obtained for biodiesel produced from the purified rubber oil showed an average of 33.66 wt% FFA, specific gravity of 0.885, pH of 5.51, flash point of 145 0C, fire point of 170 0C, cloud point of 10 0C, pour point of 4 0C, moisture content of 1.30 wt% and specific heat capacity of 9317 J/kgK. However, results obtained for biodiesel produced from the combined oil mixtures indicated an average of 19.77 wt% FFA content, specific gravity of 0.904, API gravity of 25.036, pH value of 5.73, flash point of 157 0C, Fire point of 180 0C, cloud point of 9 0C, pour point of 5 0C, moisture content of 0.93 wt% and specific heat capacity of 6051 J/kgK. Biodiesel produced from calabash seed oil is superior in quality to rubber seed oil, particularly in terms of its low FFA and moisture contents.

Jaringan kolaborasi para penulis

3 penulis · 3 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Joseph Sarwuan Tarka University Makurdi
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ijred.cbiore.id/index.php/ijred/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Comparative Analysis of Biodiesels from Calabash and Rubber Seeds Oils</dc:title>
	<dc:creator>Awulu, J.O.</dc:creator>
	<dc:creator>Ogbeh, G.O.</dc:creator>
	<dc:creator>Asawa, N.D.</dc:creator>
	<dc:subject xml:lang="en-US"></dc:subject>
	<dc:description xml:lang="en-US">Physicochemical properties of biodiesel from vegetable oils depend on the inherent properties of the oil-producing seeds. The purpose of this study is to investigate the physicochemical properties of biodiesels extracted from calabash and rubber seeds oils, as well as their combined oil mixtures with a view to ascertaining the most suitable for biodiesel production. Calabash and rubber seeds oils were separately extracted through the use of a mechanical press with periodic addition of water.  Biodiesels were produced from each category of the oils by transesterification of the free fatty acid (FFA) with alcohol under the influence of a catalyst in batch process. The physicochemical properties of the biodiesels were investigated and comparatively analysed. The results obtained indicated an average of 1.40 wt% FFA for biodiesel produced from the purified calabash oil, which has a specific gravity of 0.920, pH of 5.93, flash point of 116 0C, fire point of 138 0C, cloud point of 70 0C, pour point of -4 0C, moisture content of 0.82 wt% and specific heat capacity of 5301 J/kgK. Conversely, the results obtained for biodiesel produced from the purified rubber oil showed an average of 33.66 wt% FFA, specific gravity of 0.885, pH of 5.51, flash point of 145 0C, fire point of 170 0C, cloud point of 10 0C, pour point of 4 0C, moisture content of 1.30 wt% and specific heat capacity of 9317 J/kgK. However, results obtained for biodiesel produced from the combined oil mixtures indicated an average of 19.77 wt% FFA content, specific gravity of 0.904, API gravity of 25.036, pH value of 5.73, flash point of 157 0C, Fire point of 180 0C, cloud point of 9 0C, pour point of 5 0C, moisture content of 0.93 wt% and specific heat capacity of 6051 J/kgK. Biodiesel produced from calabash seed oil is superior in quality to rubber seed oil, particularly in terms of its low FFA and moisture contents.</dc:description>
	<dc:publisher xml:lang="en-US">Center of Biomass &amp; Renewable Energy (CBIORE)</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2015-07-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijred.cbiore.id/index.php/ijred/article/view/8638</dc:identifier>
	<dc:identifier>10.14710/ijred.4.2.131-136</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Renewable Energy Development; Vol 4, No 2 (2015): July 2015; 131-136</dc:source>
	<dc:source>2252-4940</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijred.cbiore.id/index.php/ijred/article/view/8638/PDF</dc:relation>
</oai_dc:dc>