Jurnal
SINTA 1
Improvement QCM Quality By Polystyrene Coating and Bovine Serum Albumin as Immobilization Agent
JURNAL ILMIAH PENDIDIKAN FISIKA AL BIRUNI · Vol. 8 No. 1 (2019) · hlm. 35–41
ISSN 2503-023X, 2303-1832
Terbit 2019-04-29
Penerbit Universitas Islam Negeri Raden Intan Lampung, Indonesia
Bahasa eng
Abstrak
Polystyrene (PS) thin film with various concentration of mass (1%, 3%, and 5%) has been deposited onto Quartz Crystal Microbalance (QCM) surface by a spin coating method. The purpose of this research is the improvement of Bovine Serum Albumin (BSA) immobilization into the QCM surface. The QCM resonance frequency has been investigated by means of Impedance Analyzer. The film thickness was calculated by the Sauerbrey equation. The surface roughness of the PS layer was observed by noncontact Topography Measuring System (TMS-1200). Calculation result using a Sauerbrey equation shows the thickness of the PS layer increases with the increasing PS concentration. The QCM/PS with 1% and 5% concentration of mass has rougher morphology and more frequency shifts caused by BSA injection compared to 3% concentration of PS.
Jaringan kolaborasi para penulis
13 penulis ·
27 tautan kepenulisan bersama
· 3 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Brawijaya Universitas Islam Negeri Mataram State University of Semarang Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://ejournal.radenintan.ac.id/index.php/al-biruni/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Improvement QCM Quality By Polystyrene Coating and Bovine Serum Albumin as Immobilization Agent</dc:title>
<dc:creator xml:lang="en">Didik, Lalu A.</dc:creator>
<dc:creator xml:lang="en">Yahdi, Yahdi</dc:creator>
<dc:creator xml:lang="en">Masruroh, Masruroh</dc:creator>
<dc:subject xml:lang="en">immobilization</dc:subject>
<dc:subject xml:lang="en">polystyrene</dc:subject>
<dc:subject xml:lang="en">quartz crystal microbalance</dc:subject>
<dc:subject xml:lang="en">surface roughness</dc:subject>
<dc:subject xml:lang="en">thin films</dc:subject>
<dc:description xml:lang="en">Polystyrene (PS) thin film with various concentration of mass (1%, 3%, and 5%) has been deposited onto Quartz Crystal Microbalance (QCM) surface by a spin coating method. The purpose of this research is the improvement of Bovine Serum Albumin (BSA) immobilization into the QCM surface. The QCM resonance frequency has been investigated by means of Impedance Analyzer. The film thickness was calculated by the Sauerbrey equation. The surface roughness of the PS layer was observed by noncontact Topography Measuring System (TMS-1200). Calculation result using a Sauerbrey equation shows the thickness of the PS layer increases with the increasing PS concentration. The QCM/PS with 1% and 5% concentration of mass has rougher morphology and more frequency shifts caused by BSA injection compared to 3% concentration of PS.</dc:description>
<dc:publisher xml:lang="en">Universitas Islam Negeri Raden Intan Lampung, Indonesia</dc:publisher>
<dc:date>2019-04-29</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/3716</dc:identifier>
<dc:identifier>10.24042/jipfalbiruni.v8i1.3716</dc:identifier>
<dc:source xml:lang="en">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol. 8 No. 1 (2019): Jurnal Ilmiah pendidikan Fisika Al-Biruni; 35-41</dc:source>
<dc:source xml:lang="id">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol 8 No 1 (2019): Jurnal Ilmiah pendidikan Fisika Al-Biruni; 35-41</dc:source>
<dc:source>2503-023X</dc:source>
<dc:source>2303-1832</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/3716/pdf</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2019 Jurnal Ilmiah Pendidikan Fisika Al-Biruni</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat DOI
7 sitasi
Crossref
Belum diperiksa
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Didik, L. A., Yahdi, Y., & Masruroh, M. (2019). Improvement QCM Quality By Polystyrene Coating and Bovine Serum Albumin as Immobilization Agent. JURNAL ILMIAH PENDIDIKAN FISIKA AL BIRUNI, 8(1), 35–41. https://doi.org/10.24042/jipfalbiruni.v8i1.3716
Salin
IEEE
L. A. Didik, Y. Yahdi, and M. Masruroh, “Improvement QCM Quality By Polystyrene Coating and Bovine Serum Albumin as Immobilization Agent,” JURNAL ILMIAH PENDIDIKAN FISIKA AL BIRUNI, vol. 8, no. 1, pp. 35–41, 2019, doi: 10.24042/jipfalbiruni.v8i1.3716.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.