Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Morphological characteristics and electrical properties analysis of silica based on river and coastal iron sand

JURNAL ILMIAH PENDIDIKAN FISIKA AL BIRUNI · Vol. 11 No. 1 (2022) · hlm. 129–140

DOI
10.24042/jipfalbiruni.v11i1.12390
ISSN
2503-023X, 2303-1832
Terbit
2022-04-30
Penerbit
Universitas Islam Negeri Raden Intan Lampung, Indonesia
Bahasa
eng

Abstrak

This study aims to analyze silica's morphological characteristics and electrical properties based on the river and coastal sand. Iron samples were taken from Sompang river sand, East Lombok and Coastal Sand from Gading, Mataram City. The silica was synthesized using the sol-gel method with a sintering temperature variation of 100 to 175 ℃. Morphological characteristics samples analysis was done using SEM-EDX. The electrical properties of iron sand included measuring the dielectric constant using the parallel plate method. Furthermore, the resistivity was measured using the two-point probe method. In the silica-based on river sand sample, the resistivity value was inversely proportional to the sintering temperature. In contrast, the resistivity value of silica based on the coastal sand sample was directly proportional to the sintering temperature. Silica-based on river sand has a resistivity of about 7.1'104 Wm at a sintering temperature of 100℃ and 3.5'104 Wm at a sintering temperature of 175℃. Silica-based on river sand has a resistivity of about 1.8'104 Wm at a sintering temperature of 100℃ and 7.1'104 Wm at 175℃. This research is a preliminary study on the electrical properties of natural sand-based silica to improve understanding of the physical properties of silica to be used in technological applications, such as sensors. Furthermore, the dielectric constant value in the river sand sample was directly proportional to the sintering temperature. However, the dielectric constant in the coastal sand sample was inversely proportional to the sintering temperature. Silica-based on river sand has a dielectric constant of about 1.02'102 at a sintering temperature of 100℃ and 1.18'102 at 175℃. Silica-based on coastal sand has a dielectric constant of about 1.97'102 at a sintering temperature of 100℃ and 1.15'102 at 175℃.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 155 tautan kepenulisan bersama · 109 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National University of Malaysia
  • National Research and Innovation Agency
  • Universitas Islam Negeri Mataram
  • Universitas Muhammadiyah Gorontalo
  • Universitas Islam Negeri Sultan Syarif Kasim Riau
  • University of Indonesia
  • University of Mataram
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kamaruzzaman SopianNational University of Malaysia19
Ivan TaslimUniversitas Muhammadiyah Gorontalo6
Muhammad ZohriNational University of Malaysia6
Kurniawan ArizonaUniversitas Islam Negeri Mataram6
Mohd Hafidz RuslanNational University of Malaysia5
Abrar RidwanUniversitas Muhammadiyah Riau4
Rado YendraUniversitas Islam Negeri Sultan Syarif Kasim Riau4
Ari Pani DesvinaUniversitas Islam Negeri Sultan Syarif Kasim Riau4
Majid Khan Majahar AliUniversiti Sains Malaysia4
Merita Ayu IndriantiUniversitas Muhammadiyah Gorontalo4
Intan Noviantari ManyoeState University of Gorontalo4
Mariyam Fazleena MusthafaNational University of Malaysia3
Nur Farhana Mohd RazaliNational University of Malaysia3
Hartono HartonoUniversitas Islam Negeri Sultan Syarif Kasim Riau3
Nurul Shahirah Binti RukmanNational University of Malaysia3
Saprizal HadisaputraUniversity of Mataram3
Agus RisdiyantoNational Research and Innovation Agency3
Noviadi Arief RachmanNational Research and Innovation Agency3
Ant. Ardath KristiNational Research and Innovation Agency3
Agus JunaediNational Research and Innovation Agency3
Ridwan Arief SubektiUniversity of Indonesia3
Nadia FebrianaUniversitas Islam Negeri Mataram3
Tri SuyonoKhairun University2
Sastra Kusuma WijayaUniversity of Indonesia2
Arief SudarmajiUniversity of Indonesia2
Tinton Dwi AtmajaNational Research and Innovation Agency2
Budi PrawaraNational Research and Innovation Agency2
Anjar SusatyoNational Research and Innovation Agency2
Rudi DarussalamNational Research and Innovation Agency2
Dalmasius Ganjar SubagioIndonesian Institute of Sciences2
Udin KomarudinUniversitas Widyatama2
Fitrotun AliyahUniversitas Gadjah Mada2
Arthur Gani KotoUniversitas Muhammadiyah Gorontalo2
Muslizainun MustaphaNational University of Malaysia2
Ahmad RajaniIndonesian Institute of Sciences2
Nurul Syakirah NazriNational University of Malaysia2

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ejournal.radenintan.ac.id/index.php/al-biruni/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Morphological characteristics and electrical properties analysis of silica based on river and coastal iron sand</dc:title>
	<dc:creator xml:lang="en">Meiliyadi, Lalu Ahmad Didik</dc:creator>
	<dc:creator xml:lang="en">Wahyudi, Muh.</dc:creator>
	<dc:creator xml:lang="en">Damayanti, Isniwana</dc:creator>
	<dc:creator xml:lang="en">Fudholi, Ahmad</dc:creator>
	<dc:subject xml:lang="en">Dielectric Constant</dc:subject>
	<dc:subject xml:lang="en">Iron Sand</dc:subject>
	<dc:subject xml:lang="en">Morphology</dc:subject>
	<dc:subject xml:lang="en">Resistivity</dc:subject>
	<dc:subject xml:lang="en">Silica</dc:subject>
	<dc:description xml:lang="en">This study aims to analyze silica's morphological characteristics and electrical properties based on the river and coastal sand. Iron samples were taken from Sompang river sand, East Lombok and Coastal Sand from Gading, Mataram City. The silica was synthesized using the sol-gel method with a sintering temperature variation of 100 to 175 ℃. Morphological characteristics samples analysis was done using SEM-EDX. The electrical properties of iron sand included measuring the dielectric constant using the parallel plate method. Furthermore, the resistivity was measured using the two-point probe method. In the silica-based on river sand sample, the resistivity value was inversely proportional to the sintering temperature. In contrast, the resistivity value of silica based on the coastal sand sample was directly proportional to the sintering temperature. Silica-based on river sand has a resistivity of about 7.1'104 Wm at a sintering temperature of 100℃ and 3.5'104 Wm at a sintering temperature of 175℃. Silica-based on river sand has a resistivity of about 1.8'104 Wm at a sintering temperature of 100℃ and 7.1'104 Wm at 175℃. This research is a preliminary study on the electrical properties of natural sand-based silica to improve understanding of the physical properties of silica to be used in technological applications, such as sensors. Furthermore, the dielectric constant value in the river sand sample was directly proportional to the sintering temperature. However, the dielectric constant in the coastal sand sample was inversely proportional to the sintering temperature. Silica-based on river sand has a dielectric constant of about 1.02'102 at a sintering temperature of 100℃ and 1.18'102 at 175℃. Silica-based on coastal sand has a dielectric constant of about 1.97'102 at a sintering temperature of 100℃ and 1.15'102 at 175℃.</dc:description>
	<dc:publisher xml:lang="en">Universitas Islam Negeri Raden Intan Lampung, Indonesia</dc:publisher>
	<dc:date>2022-04-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/12390</dc:identifier>
	<dc:identifier>10.24042/jipfalbiruni.v11i1.12390</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol. 11 No. 1 (2022): Jurnal Ilmiah Pendidikan Fisika Al-Biruni; 129-140</dc:source>
	<dc:source xml:lang="id">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol 11 No 1 (2022): Jurnal Ilmiah Pendidikan Fisika Al-Biruni; 129-140</dc:source>
	<dc:source>2503-023X</dc:source>
	<dc:source>2303-1832</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/12390/pdf</dc:relation>
	<dc:relation>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/12390/8720</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Physics Education Department, UIN Raden Intan Lampung, Indonesia</dc:rights>
</oai_dc:dc>