Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimization of Oxygen Flow Valve Holes in Small Industrial Scale Husk Furnaces

JURNAL ILMIAH PENDIDIKAN FISIKA AL BIRUNI · Vol. 11 No. 2 (2022) · hlm. 255–265

DOI
10.24042/jipfalbiruni.v11i2.14291
ISSN
2503-023X, 2303-1832
Terbit
2022-10-30
Penerbit
Universitas Islam Negeri Raden Intan Lampung, Indonesia
Bahasa
eng

Abstrak

The increasing use of fossil-based fuels causes an imbalance between energy demand and the availability of that energy. Therefore, the use of rice husk biomass as alternative energy was implemented through the use of rice husk furnaces. This research aims to optimize the efficiency of a small industrial-scale husk furnace by varying the oxygen flow valve holes and the mass of the heated water. The test on the husk furnace was carried out using the Water Boiling Test (WBT) method with the following test parameters: combustion time, FCR, input power, output power, power loss, radiant energy, and thermal conductivity of the pan and chimney of the husk furnace. Tests were carried out on four variations of the oxygen flow valve holes (horizontal: 18 x 36 cm2 and 27 x 36 cm2, vertical: 27 x 24 cm2 and 27 x 12 cm2) and three variations in the mass of heated water (6 kg, 12 kg, and 18 kg). The highest efficiency of the husk furnace was obtained at 18 kg of water, and based on each test parameter, the performance of the husk furnace was most optimal at the horizontal valve hole measuring 27 x 36 cm2 with an average efficiency of 17.32%.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 181 tautan kepenulisan bersama · 95 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • IPB University
  • Bandung Institute of Technology
  • Universitas Gadjah Mada
  • IKIP Siliwangi
  • Universiti Malaysia Perlis
  • Sunan Gunung Djati State Islamic University Bandung
  • University of Indonesia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Mahfuddin ZuhriIPB University4
Pepen ArifinBandung Institute of Technology3
Heriyanto SyafutraIPB University3
Z. JamalAfiliasi tidak diketahui2
Hanedi DarmasetiawanIPB University2
Hendradi HardhienataIPB University2
Muhammad HikamUniversity of Indonesia2
Rofiqul UmamKwansei Gakuin University2
Utami Dyah SyafitriIPB University1
Nindya WulandariIPB University1
Erfiani ErfianiIPB University1
Dedi JunaediIKIP Siliwangi1
BadrudinAfiliasi tidak diketahui1
Tam-Tam KamaludinAfiliasi tidak diketahui1
Siti FatimahIKIP Siliwangi1
Nandang RukandaIKIP Siliwangi1
Usep Dedi RostandiSunan Gunung Djati State Islamic University Bandung1
Hasan BasriSunan Gunung Djati State Islamic University Bandung1
Sanna TakingUniversiti Malaysia Perlis1
S.N. JusohUniversiti Malaysia Perlis1
M. A. IdrisUniversiti Malaysia Perlis1
Akhiruddin AkhiruddinIPB University1
R. ErviansyahIPB University1
Farida HuriawatiIPB University1
Nina Siti AminahBandung Institute of Technology1
Mitra DjamalBandung Institute of Technology1
Wahyudi WahyudiUniversitas Gadjah Mada1
Perdinan PerdinanIPB University1
Irwan MeilanoBandung Institute of Technology1
Imam SuyantoUniversitas Gadjah Mada1
Ari SetiawanUniversitas Gadjah Mada1
Heriansyah PutraIPB University1
Herlan DarmawanUniversitas Gadjah Mada1
Maria EvitaBandung Institute of Technology1
Moh YasinUniversitas Airlangga1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ejournal.radenintan.ac.id/index.php/al-biruni/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimization of Oxygen Flow Valve Holes in Small Industrial Scale Husk Furnaces</dc:title>
	<dc:creator xml:lang="en">Hajar, Siti</dc:creator>
	<dc:creator xml:lang="en">Har, Nazopatul Patonah</dc:creator>
	<dc:creator xml:lang="en">Irmansyah, Irmansyah</dc:creator>
	<dc:creator xml:lang="en">Arif, Ardian</dc:creator>
	<dc:creator xml:lang="en">Irzaman, Irzaman</dc:creator>
	<dc:subject xml:lang="en">Efficiency</dc:subject>
	<dc:subject xml:lang="en">Husk Furnace</dc:subject>
	<dc:subject xml:lang="en">Optimization</dc:subject>
	<dc:subject xml:lang="en">Oxygen Flow Valve Hole</dc:subject>
	<dc:subject xml:lang="en">Rice Husk.</dc:subject>
	<dc:description xml:lang="en">The increasing use of fossil-based fuels causes an imbalance between energy demand and the availability of that energy. Therefore, the use of rice husk biomass as alternative energy was implemented through the use of rice husk furnaces. This research aims to optimize the efficiency of a small industrial-scale husk furnace by varying the oxygen flow valve holes and the mass of the heated water. The test on the husk furnace was carried out using the Water Boiling Test (WBT) method with the following test parameters: combustion time, FCR, input power, output power, power loss, radiant energy, and thermal conductivity of the pan and chimney of the husk furnace. Tests were carried out on four variations of the oxygen flow valve holes (horizontal: 18 x 36 cm2 and 27 x 36 cm2, vertical: 27 x 24 cm2 and 27 x 12 cm2) and three variations in the mass of heated water (6 kg, 12 kg, and 18 kg). The highest efficiency of the husk furnace was obtained at 18 kg of water, and based on each test parameter, the performance of the husk furnace was most optimal at the horizontal valve hole measuring 27 x 36 cm2 with an average efficiency of 17.32%.</dc:description>
	<dc:publisher xml:lang="en">Universitas Islam Negeri Raden Intan Lampung, Indonesia</dc:publisher>
	<dc:date>2022-10-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/14291</dc:identifier>
	<dc:identifier>10.24042/jipfalbiruni.v11i2.14291</dc:identifier>
	<dc:source xml:lang="en">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol. 11 No. 2 (2022): Jurnal Ilmiah Pendidikan Fisika Al-Biruni; 255-265</dc:source>
	<dc:source xml:lang="id">Jurnal Ilmiah Pendidikan Fisika Al-Biruni; Vol 11 No 2 (2022): Jurnal Ilmiah Pendidikan Fisika Al-Biruni; 255-265</dc:source>
	<dc:source>2503-023X</dc:source>
	<dc:source>2303-1832</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ejournal.radenintan.ac.id/index.php/al-biruni/article/view/14291/pdf</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Physics Education Department, UIN Raden Intan Lampung, Indonesia</dc:rights>
</oai_dc:dc>