Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Finite Element Analysis of Miniplate for Post-Fracture Finger Rehabilitation Device

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 2 No. 1 (2020) · hlm. 21–26

DOI
10.37385/jaets.v2i1.160
ISSN
2715-6079, 2715-6087
Terbit
2020-11-11
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Miniplate plays an important role as one of the implant components used as a rehabilitation device for a post-fracture finger. In this study, an analysis was carried out to determine the strength of the miniplate design made from Ti-6Al-4V titanium alloy material. Simulation and analysis were carried out using the finite element method. The given input for modeling tensile and bending loads determined von Mises stress, kinetic energy, strain energy, and internal energy. The analysis showed that uneven von Mises stress and strain distribution have occurred. The critical concentration of stresses was located at the center of the miniplate and these values were a lot lower than the yield stress of Ti-6Al-4V.

Kata kunci

Jaringan kolaborasi para penulis

39 penulis · 121 tautan kepenulisan bersama · 10 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • UIN Sunan Ampel Surabaya
  • Institut Agama Islam Negeri Kendari
  • Universitas KH. A. Wahab Hasbullah
  • Meteorological, Climatological, And Geophysical Agency
  • Universitas Muhammadiyah Parepare
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
AM MufarrihAfiliasi tidak diketahui9
A. Hanif FirdausAfiliasi tidak diketahui4
Fina Andika F. A.Afiliasi tidak diketahui4
Andre KurniawanAfiliasi tidak diketahui3
Zakki Fuadi EmzainAfiliasi tidak diketahui3
Moh HartonoAfiliasi tidak diketahui2
Moh. Nasir HariyantoAfiliasi tidak diketahui2
Fataa KusumattaqiinAfiliasi tidak diketahui2
Rangga E. SantosoAfiliasi tidak diketahui2
Finsa Adhi PratamaInstitut Agama Islam Negeri Kendari1
Aris Nur Qadar Ar RazakInstitut Agama Islam Negeri Kendari1
Habibullah HabibullahAfiliasi tidak diketahui1
Muh Asrianto ZainalInstitut Agama Islam Negeri Kendari1
La Ode Muhammad Iman Abdi Anantomo UkeInstitut Agama Islam Negeri Kendari1
Dian Candra Rini NovitasariUIN Sunan Ampel Surabaya1
Fajar SetiawanMeteorological, Climatological, And Geophysical Agency1
Risma Madurahma PutriUIN Sunan Ampel Surabaya1
Ahmad Hanif AsyharUIN Sunan Ampel Surabaya1
Nurissaidah UlinnuhaUIN Sunan Ampel Surabaya1
Elisa SyafaqohAfiliasi tidak diketahui1
Yusuf Dewantoro HerlambangAfiliasi tidak diketahui1
Nanang ApriandiAfiliasi tidak diketahui1
Avicenna An-NizhamiAfiliasi tidak diketahui1
Bono BonoAfiliasi tidak diketahui1
Friska Ayu Fitrianti SugionoAfiliasi tidak diketahui1
Ignatius Gunawan WidodoAfiliasi tidak diketahui1
Padang YanuarAfiliasi tidak diketahui1
Poppy PuspitasariAfiliasi tidak diketahui1
Putut MurdantoAfiliasi tidak diketahui1
Mohammad HartonoAfiliasi tidak diketahui1
Syamsul HadiAfiliasi tidak diketahui1
Jasman JasmanUniversitas Muhammadiyah Parepare1
Remon LapisaAfiliasi tidak diketahui1
Zainal AbadiAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Finite Element Analysis of Miniplate for Post-Fracture Finger Rehabilitation Device </dc:title>
	<dc:creator xml:lang="en">Qosim, Nanang</dc:creator>
	<dc:creator xml:lang="en">Monasari, Ratna</dc:creator>
	<dc:creator xml:lang="en">Emzain, Zakki F.</dc:creator>
	<dc:creator xml:lang="en">Hakim, Lutfi</dc:creator>
	<dc:creator xml:lang="en">Sai’in, Ali</dc:creator>
	<dc:subject xml:lang="en">miniplate; implant; finite elemen method; fracture; finger; titanium.</dc:subject>
	<dc:description xml:lang="en">Miniplate plays an important role as one of the implant components used as a rehabilitation device for a post-fracture finger. In this study, an analysis was carried out to determine the strength of the miniplate design made from Ti-6Al-4V titanium alloy material. Simulation and analysis were carried out using the finite element method. The given input for modeling tensile and bending loads determined von Mises stress, kinetic energy, strain energy, and internal energy. The analysis showed that uneven von Mises stress and strain distribution have occurred. The critical concentration of stresses was located at the center of the miniplate and these values were a lot lower than the yield stress of Ti-6Al-4V.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2020-11-11</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/160</dc:identifier>
	<dc:identifier>10.37385/jaets.v2i1.160</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 2 No. 1 (2020): Journal of Applied Engineering and Technological Science (JAETS); 21-26</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v2i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/160/120</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2020 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>