Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Number of Machine and Material Requirements for Production Planning of Tablet Tooling with the Demand of 200 Units/Day

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 2 No. 2 (2021) · hlm. 78–84

DOI
10.37385/jaets.v2i2.209
ISSN
2715-6079, 2715-6087
Terbit
2021-05-09
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Shaping and marketing a product in tablet form is an easy and economical alternative to product shaping. Products in tablet form now cover almost all fields, so that the demand for tablet tooling of various sizes and variations continues to increase. As an effort to support the effectiveness and proper industrial planning, it is necessary to carry out an analysis of the machine and material requirements to produce tablet tooling which is the aim of this study. To achieve these objectives, the methods used in this study include product design, operation plan analysis, and calculation of material requirements and number of machines. The result shows that the number of machine requirements to manufacture the die and punch of tablet tooling with the demand of 200 unit/day are two units of power hacksaw, five units of lathe machine, and a unit of milling machine. On the other hand, the material requirements needed in one day are 22.24 m (Ø45 mm x 5 bars) and 12.79 m (Ø18 mm x 3 bars).

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 154 tautan kepenulisan bersama · 71 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Universitas Negeri Padang
  • State University of Malang
  • Sriwijaya University
  • Politeknik Negeri Semarang
  • Sebelas Maret University
  • Kumamoto University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ratna MonasariPoliteknik Negeri Malang8
Ali Sai’inPoliteknik Negeri Semarang5
Remon LapisaUniversitas Negeri Padang4
Jasman JasmanUniversitas Negeri Padang3
Fina Andika Frida AstutiPoliteknik Negeri Malang3
Ahmad Hanif FirdausPoliteknik Negeri Malang3
Fataa KusumattaqiinPoliteknik Negeri Samarinda3
Rangga E. SantosoCranfield University3
Syamsul HadiUniversity of Sarjanawiyata Tamansiswa3
Dori YuvendaUniversitas Negeri Padang2
Waskito WaskitoUniversitas Negeri Padang2
Purwantono PurwantonoUniversitas Negeri Padang2
Lutfi HakimPoliteknik Negeri Banyuwangi2
Haris Puspito BuwonoPoliteknik Negeri Malang1
Hangga WicaksanaPoliteknik Negeri Malang1
Joko WaluyoSebelas Maret University1
Moch. Fauzun DaroiniPoliteknik Negeri Malang1
Ilham Taufik MuslimPoliteknik Negeri Malang1
Masato MachidaKumamoto University1
Poppy PuspitasariState University of Malang1
Putut MurdantoState University of Malang1
Mohammad Sugi HartonoPoliteknik Negeri Malang1
Gusni SushantiHiroshima University1
Muhammad Djoni BustanSriwijaya University1
Sri HaryatiSriwijaya University1
Krismadinata KrismadinataUniversitas Negeri Padang1
Sri Rizki Putri PrimandariUniversitas Negeri Padang1
Mulianti MuliantiUniversitas Negeri Padang1
Tarig ElshaaraniAfiliasi tidak diketahui1
Yus Donald ChaniagoUlsan National Institute of Science and Technology1
Hendri NurdinUniversitas Negeri Padang1
Fadhilah FadhilahUniversitas Negeri Padang1
Toto SugiartoUniversitas Negeri Padang1
Yolli FernandaUniversitas Negeri Padang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Number of Machine and Material Requirements for Production Planning of Tablet Tooling with the Demand of 200 Units/Day</dc:title>
	<dc:creator xml:lang="en">Qosim, Nanang</dc:creator>
	<dc:creator xml:lang="en">Kurniawan, Andre</dc:creator>
	<dc:creator xml:lang="en">Hariyanto, Moh. Nasir</dc:creator>
	<dc:creator xml:lang="en">Emzain, Zakki F.</dc:creator>
	<dc:creator xml:lang="en">Hartono, Moh.</dc:creator>
	<dc:creator xml:lang="en">Mufarrih, AM</dc:creator>
	<dc:subject xml:lang="en">tablet tooling, number of machines, need of materials, die and punch, demand</dc:subject>
	<dc:description xml:lang="en">Shaping and marketing a product in tablet form is an easy and economical alternative to product shaping. Products in tablet form now cover almost all fields, so that the demand for tablet tooling of various sizes and variations continues to increase. As an effort to support the effectiveness and proper industrial planning, it is necessary to carry out an analysis of the machine and material requirements to produce tablet tooling which is the aim of this study. To achieve these objectives, the methods used in this study include product design, operation plan analysis, and calculation of material requirements and number of machines. The result shows that the number of machine requirements to manufacture the die and punch of tablet tooling with the demand of 200 unit/day are two units of power hacksaw, five units of lathe machine, and a unit of milling machine. On the other hand, the material requirements needed in one day are 22.24 m (Ø45 mm x 5 bars) and 12.79 m (Ø18 mm x 3 bars).</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2021-05-09</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/209</dc:identifier>
	<dc:identifier>10.37385/jaets.v2i2.209</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 2 No. 2 (2021): Journal of Applied Engineering and Technological Science (JAETS); 78 - 84</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v2i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/209/177</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>