Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Development of Composite Material for Wind Turbine Blades

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 2 No. 2 (2021) · hlm. 139–150

DOI
10.37385/jaets.v2i2.211
ISSN
2715-6079, 2715-6087
Terbit
2021-07-02
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Rapid increases in the prices of conventional turbine blade making materials as well as future sustainability issues is attracting research interest in the development of polymer composites for turbine blade applications. This study examines the suitability of using a novel bamboo fibre and recycled plastics composite developed for wind turbine blade application. Bamboo fibre was extracted from raw bamboo by chemical and mechanical processes. Recycled High Density Polyethylene (HDPE) was collected, cut into pieces, cleaned and combined with extracted bamboo fibre to form the composite. The percentage ratio of fibre content in the ten specimens ranged from 2.5% to 25%. A series of mechanical tests were conducted on the specimens, including tensile test, impact test, water absorption test and sun radiation test. Results established that as the percentage of bamboo fibre in the specimen increased, the tensile strength and impact energy also increased. Water absorption and sun radiation tests conducted on specimen X revealed no meaningful impact its mechanical properties. Hence, the most significant deduction from this study is that the specimen with 25% bamboo fibre and 75% HDPE matrix possesses the quality that qualifies it to be used as a material for wind turbine blade fabrication.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 42 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Kwame Nkrumah University of Science and Technology
  • Indonesia University of Education
  • University of Energy and Natural Resources
  • Ho Technical University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Denis E.K. DzebreKwame Nkrumah University of Science and Technology6
Kofi Owura AmoabengKwame Nkrumah University of Science and Technology5
Godwin Kafui AyetorKwame Nkrumah University of Science and Technology3
Michael Nii Sackey SackeyKwame Nkrumah University of Science and Technology3
Joseph NyumutsuUniversity of Energy and Natural Resources3
Benjamin Atribawuni AsaagaKwame Nkrumah University of Science and Technology3
Lena Dzifa MensahKwame Nkrumah University of Science and Technology2
Laudina MensahKwame Nkrumah University of Science and Technology2
Agus SetiawanIndonesia University of Education1
Emmanuel Obobi TettehfioHo Technical University1
Iwan KustiawanIndonesia University of Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Development of Composite Material for Wind Turbine Blades</dc:title>
	<dc:creator xml:lang="en">Andoh, Prince Yaw</dc:creator>
	<dc:creator xml:lang="en">Agyei-Agyemang, Anthony</dc:creator>
	<dc:creator xml:lang="en">Tawiah, Peter Oppong</dc:creator>
	<dc:creator xml:lang="en">Sekyere, Charles Kofi Kafui</dc:creator>
	<dc:creator xml:lang="en">Asante, Charles McCarthy</dc:creator>
	<dc:subject xml:lang="en">Bamboo fibre, Composite materials, Wind turbine blades, High density polyethylene, Mechanical tests</dc:subject>
	<dc:description xml:lang="en">Rapid increases in the prices of conventional turbine blade making materials as well as future sustainability issues is attracting research interest in the development of polymer composites for turbine blade applications. This study examines the suitability of using a novel bamboo fibre and recycled plastics composite developed for wind turbine blade application. Bamboo fibre was extracted from raw bamboo by chemical and mechanical processes. Recycled High Density Polyethylene (HDPE) was collected, cut into pieces, cleaned and combined with extracted bamboo fibre to form the composite. The percentage ratio of fibre content in the ten specimens ranged from 2.5% to 25%. A series of mechanical tests were conducted on the specimens, including tensile test, impact test, water absorption test and sun radiation test. Results established that as the percentage of bamboo fibre in the specimen increased, the tensile strength and impact energy also increased. Water absorption and sun radiation tests conducted on specimen X revealed no meaningful impact its mechanical properties. Hence, the most significant deduction from this study is that the specimen with 25% bamboo fibre and 75% HDPE matrix possesses the quality that qualifies it to be used as a material for wind turbine blade fabrication.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2021-07-02</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/211</dc:identifier>
	<dc:identifier>10.37385/jaets.v2i2.211</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 2 No. 2 (2021): Journal of Applied Engineering and Technological Science (JAETS); 139 - 150</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v2i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/211/192</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>