Jurnal
SINTA 1
Fabrication and Testing of a Low-Cost Wind Turbine Blade using Bamboo Reinforced Recycled Plastic
Journal of Applied Engineering and Technological Science (JAETS) · Vol. 2 No. 2 (2021) · hlm. 125–138
ISSN 2715-6079, 2715-6087
Terbit 2021-06-25
Penerbit Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa en
Abstrak
Wind energy, as a sustainable energy option is gaining research attention due to its price competitiveness relative to conventional energy sources. This study presents the fabrication and testing of a low-cost wind turbine blade using bamboo fibre with recycled plastic. Bamboo fibre was extracted from raw bamboo and combined with adequately conditioned Recycled High-Density Polyethylene (RHDPE) to form a composite which is 25% bamboo fibre and 75% RHDPE. The composite materials was then used to fabricate a turbine blade which was tested and the results compared with typical performance indices for a turbine blade made of fibre glass for comparative analysis. The turbine blades were installed at a height of 10 meters at the test site and monitored. Results showed the energy per unit cost (kWh) for the composite material was lower than that of the glass fibre with a life cycle of 107 for glass fibre and 106 cycles for the bamboo plastic. Stress and deformation analysis showed a higher value for glass fiber compared with the composite material. It can be deduced that composite material matrix possesses the desired properties and energy per unit cost ratio for consideration in building wind turbine blades.
Jaringan kolaborasi para penulis
16 penulis ·
42 tautan kepenulisan bersama
· 9 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Kwame Nkrumah University of Science and Technology Indonesia University of Education University of Energy and Natural Resources Ho Technical University
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Fabrication and Testing of a Low-Cost Wind Turbine Blade using Bamboo Reinforced Recycled Plastic</dc:title>
<dc:creator xml:lang="en">Andoh, Prince Yaw</dc:creator>
<dc:creator xml:lang="en">Sekyere, Charles Kofi Kafui</dc:creator>
<dc:creator xml:lang="en">Ayetor, Godwin Kafui</dc:creator>
<dc:creator xml:lang="en">Sackey, Michael Nii</dc:creator>
<dc:subject xml:lang="en">Wind turbine blade, wind energy, Sustainable energy, Bamboo fibre, Recycled plastic</dc:subject>
<dc:description xml:lang="en">Wind energy, as a sustainable energy option is gaining research attention due to its price competitiveness relative to conventional energy sources. This study presents the fabrication and testing of a low-cost wind turbine blade using bamboo fibre with recycled plastic. Bamboo fibre was extracted from raw bamboo and combined with adequately conditioned Recycled High-Density Polyethylene (RHDPE) to form a composite which is 25% bamboo fibre and 75% RHDPE. The composite materials was then used to fabricate a turbine blade which was tested and the results compared with typical performance indices for a turbine blade made of fibre glass for comparative analysis. The turbine blades were installed at a height of 10 meters at the test site and monitored. Results showed the energy per unit cost (kWh) for the composite material was lower than that of the glass fibre with a life cycle of 107 for glass fibre and 106 cycles for the bamboo plastic. Stress and deformation analysis showed a higher value for glass fiber compared with the composite material. It can be deduced that composite material matrix possesses the desired properties and energy per unit cost ratio for consideration in building wind turbine blades.</dc:description>
<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
<dc:date>2021-06-25</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/212</dc:identifier>
<dc:identifier>10.37385/jaets.v2i2.212</dc:identifier>
<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 2 No. 2 (2021): Journal of Applied Engineering and Technological Science (JAETS); 125 - 138</dc:source>
<dc:source>2715-6079</dc:source>
<dc:source>2715-6087</dc:source>
<dc:source>10.37385/jaets.v2i2</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/212/188</dc:relation>
<dc:rights xml:lang="en">Copyright (c) 2021 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref, doaj.
Sitasi artikel ini
APA 7
Andoh, P. Y., Sekyere, C. K. K., Ayetor, G. K., & Sackey, M. N. (2021). Fabrication and Testing of a Low-Cost Wind Turbine Blade using Bamboo Reinforced Recycled Plastic. Journal of Applied Engineering and Technological Science (JAETS), 2(2), 125–138. https://doi.org/10.37385/jaets.v2i2.212
Salin
IEEE
P. Y. Andoh, C. K. K. Sekyere, G. K. Ayetor, and M. N. Sackey, “Fabrication and Testing of a Low-Cost Wind Turbine Blade using Bamboo Reinforced Recycled Plastic,” Journal of Applied Engineering and Technological Science (JAETS), vol. 2, no. 2, pp. 125–138, 2021, doi: 10.37385/jaets.v2i2.212.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.