Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Effect Of Addition Of Limestone Powder And Gypsum As Isolator Media On Low Carbon Steel SMAW Welding

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 2 No. 2 (2021) · hlm. 94–102

DOI
10.37385/jaets.v2i2.223
ISSN
2715-6079, 2715-6087
Terbit
2021-05-09
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Metal connection due to heat with or without the influence of pressure or metallurgical bonds caused by attractive forces between atoms. DIN (Deutsche Industrie Normen) state that metallurgical bonding of metal or guide metal joints in a melted or liquid state. This study aims to determine the effect of limestone powder and gypsum as an insulating medium in SMAW (Shielded metal arc welding) welding. This study using experimental methods with SMAW welding. Welding metal cooled with limestone media has a harder hardness than gypsum and air media, which is limestone has a thermal conductivity value of 3.897 W / mºC. In comparison, gypsum has a thermal conductivity value of 1.39 W/mºC, and air has a thermal conductivity value of 0.023 J/msºC, so limestone is a better insulator than gypsum and air. The greater the conductivity value of the object, the better the thermal conductivity of the metal and the more complicated the weld metal and the lower the thermal conductivity value, the softer the metal hardness, limestone has a thermal conductivity value of 3.897 W / mºC while gypsum has a thermal conductivity value of 1, 39 W / mºC and air have a thermal conductivity value of 0.023 J / msºC, proving that the lower the conductivity value, the hardness of the weld metal is getting softer, but in the HAZ section it proves that the lower the conductivity value, the more complex the hardness in the HAZ section.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 45 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Ketapang
  • Universitas Halu Oleo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Asep RuchiyatPoliteknik Negeri Ketapang4
Yusuf YusufUniversitas Halu Oleo3
Epriyandi EpriyandiPoliteknik Negeri Ketapang2
Helanianto HelaniantoPoliteknik Negeri Ketapang2
Hairian RahmadiPoliteknik Negeri Ketapang2
Ismael MarjukiPoliteknik Negeri Ketapang2
Dewi NurmayasariPoliteknik Negeri Ketapang2
Yusuf YusufUniversitas Halu Oleo2
Ahmad RaviPoliteknik Negeri Ketapang1
Irianto SpPoliteknik Negeri Ketapang1
Ningrum AstriawatiAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Effect Of Addition Of Limestone Powder And Gypsum As Isolator Media On Low Carbon Steel SMAW Welding</dc:title>
	<dc:creator xml:lang="en">Anhar, Muh</dc:creator>
	<dc:creator xml:lang="en">Polonia, Betti Ses Eka</dc:creator>
	<dc:subject xml:lang="en">SMAW</dc:subject>
	<dc:subject xml:lang="en">Limestone Isolator</dc:subject>
	<dc:subject xml:lang="en">Gypsum</dc:subject>
	<dc:subject xml:lang="en">Low Carbon Steel</dc:subject>
	<dc:description xml:lang="en">Metal connection due to heat with or without the influence of pressure or metallurgical bonds caused by attractive forces between atoms. DIN (Deutsche Industrie Normen) state that metallurgical bonding of metal or guide metal joints in a melted or liquid state. This study aims to determine the effect of limestone powder and gypsum as an insulating medium in SMAW (Shielded metal arc welding) welding. This study using experimental methods with SMAW welding. Welding metal cooled with limestone media has a harder hardness than gypsum and air media, which is limestone has a thermal conductivity value of 3.897 W / mºC. In comparison, gypsum has a thermal conductivity value of 1.39 W/mºC, and air has a thermal conductivity value of 0.023 J/msºC, so limestone is a better insulator than gypsum and air. The greater the conductivity value of the object, the better the thermal conductivity of the metal and the more complicated the weld metal and the lower the thermal conductivity value, the softer the metal hardness, limestone has a thermal conductivity value of 3.897 W / mºC while gypsum has a thermal conductivity value of 1, 39 W / mºC and air have a thermal conductivity value of 0.023 J / msºC, proving that the lower the conductivity value, the hardness of the weld metal is getting softer, but in the HAZ section it proves that the lower the conductivity value, the more complex the hardness in the HAZ section.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2021-05-09</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/223</dc:identifier>
	<dc:identifier>10.37385/jaets.v2i2.223</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 2 No. 2 (2021): Journal of Applied Engineering and Technological Science (JAETS); 94 - 102</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v2i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/223/179</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2021 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>