Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Assessment of Automobile Engines Rebuilt at Local Artisan Workshops in Ghana

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 3 No. 2 (2022) · hlm. 53–66

DOI
10.37385/jaets.v3i2.314
ISSN
2715-6079, 2715-6087
Terbit
2022-06-10
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

The manufacturing industry of Ghana, as promising as it is, has many shaping to be done. This specifically goes to the automobile manufacturers and engine rebuilders of Ghana. Though agile and very skillful in rebuilding engines many have reported grievances on their service renders to them. This shows that, the knowledge and zeal to rebuild it puts the industry at a certain level but needs further additional and requisite tuning to reach the pinnacle. For this reason, the researcher therefore sought to investigate how cylinder bores and piston ring end-gap contribute to the failure of locally rebuilt engines. A descriptive design was used for the study and sample of 60 participants responded to the structured questionnaire. The study used primary data to provide reliable and up-to-date information the researcher needs for the analysis. The data were entered in SPSS with analysis performed using inferential and descriptive analysis methods. The findings of the study revealed that errors made in the work procedure had a stronger effect on the clients’ than its other counterpart. Practically, the flaws in the work procedure of rebuilding cylinder bore significantly affects clients’ satisfaction.

Kata kunci

Jaringan kolaborasi para penulis

16 penulis · 42 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Kwame Nkrumah University of Science and Technology
  • Indonesia University of Education
  • University of Energy and Natural Resources
  • Ho Technical University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Charles K.K. SekyereKwame Nkrumah University of Science and Technology9
Denis E.K. DzebreKwame Nkrumah University of Science and Technology5
Anthony Agyei-AgyemangKwame Nkrumah University of Science and Technology2
Peter Oppong TawiahKwame Nkrumah University of Science and Technology2
Laudina MensahKwame Nkrumah University of Science and Technology2
Charles McCarthy AsanteKwame Nkrumah University of Science and Technology1
Lena Dzifa MensahKwame Nkrumah University of Science and Technology1
Joseph NyumutsuUniversity of Energy and Natural Resources1
Benjamin Atribawuni AsaagaKwame Nkrumah University of Science and Technology1
Agus SetiawanIndonesia University of Education1
Emmanuel Obobi TettehfioHo Technical University1
Iwan KustiawanIndonesia University of Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Assessment of Automobile Engines Rebuilt at Local Artisan Workshops in Ghana</dc:title>
	<dc:creator xml:lang="en">Andoh, Prince Yaw</dc:creator>
	<dc:creator xml:lang="en">Ayetor, Godwin Kafui</dc:creator>
	<dc:creator xml:lang="en">Amoabeng, Kofi Owura</dc:creator>
	<dc:creator xml:lang="en">Sackey, Michael Nii Sackey</dc:creator>
	<dc:subject xml:lang="en">Engine Rebuilt, Local Artisans, Cylinder Re-bore, Piston Ring, Automobile</dc:subject>
	<dc:description xml:lang="en">The manufacturing industry of Ghana, as promising as it is, has many shaping to be done. This specifically goes to the automobile manufacturers and engine rebuilders of Ghana. Though agile and very skillful in rebuilding engines many have reported grievances on their service renders to them. This shows that, the knowledge and zeal to rebuild it puts the industry at a certain level but needs further additional and requisite tuning to reach the pinnacle. For this reason, the researcher therefore sought to investigate how cylinder bores and piston ring end-gap contribute to the failure of locally rebuilt engines. A descriptive design was used for the study and sample of 60 participants responded to the structured questionnaire. The study used primary data to provide reliable and up-to-date information the researcher needs for the analysis. The data were entered in SPSS with analysis performed using inferential and descriptive analysis methods. The findings of the study revealed that errors made in the work procedure had a stronger effect on the clients’ than its other counterpart. Practically, the flaws in the work procedure of rebuilding cylinder bore significantly affects clients’ satisfaction.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2022-06-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/314</dc:identifier>
	<dc:identifier>10.37385/jaets.v3i2.314</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 3 No. 2 (2022): Journal of Applied Engineering and Technological Science (JAETS); 53-66</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v3i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/314/53-66</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2022 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>