Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The Development of Exhaust Fan Housing With Ceiling Mounting For High Rise Buildings by Using DFMA

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 4 No. 2 (2023) · hlm. 895–907

DOI
10.37385/jaets.v4i2.1675
ISSN
2715-6079, 2715-6087
Terbit
2023-06-05
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Design for manufacturing and assembly (DFMA) is widely applied in many industries to optimize the manufacturing and assembly process at the early stage of design, with the aides of the CAD model. Many researchers apply the DFMA to increase assembly efficiency, by decreasing the number of parts from a product, decreasing the manufacturing cost, and reducing assembly time. Therefore, this research applies DFMA to develop exhaust fan housing with ceiling mounting for high rise building type with the same purpose, and at the same time to justify that the method can overcome the problem of assembly time in a production line. Both designs from before and after the application of DFMA, are being compared by using finite element simulation and experimental. The simulation employs stress analysis, to predict the strength of those designs. While the experimental uses a manufacturing cost survey, real assembly time survey and failure test to show the advantages of DFMA design results. The research result shows that the DFMA method can decrease the manufacturing cost by 0.44%, and the assembly time by up to 2%, and able to withstand the entire mass of the ceiling mounting fan.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 165 tautan kepenulisan bersama · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Stikubank
  • Islamic University of Indonesia
  • Badan Pengkajian dan Penerapan Teknologi
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Deni Fajar FitriyanaAfiliasi tidak diketahui9
Tezara CionitaAfiliasi tidak diketahui7
Al Ichlas ImranAfiliasi tidak diketahui4
Rifky IsmailAfiliasi tidak diketahui3
Jamiluddin JaafarAfiliasi tidak diketahui3
Samsudin AnisAfiliasi tidak diketahui2
Agustinus Purna IrawanAfiliasi tidak diketahui2
Rozanna DewiAfiliasi tidak diketahui2
Mohd Ruzaimi Mat RejabAfiliasi tidak diketahui2
Agung Efriyo HadiAfiliasi tidak diketahui2
Muji SetiyoAfiliasi tidak diketahui2
Agus PrasetyoUniversitas Stikubank1
Risky IsmailAfiliasi tidak diketahui1
A. P. BayusenoAfiliasi tidak diketahui1
Muhammad AfrizalAfiliasi tidak diketahui1
Janviter ManaluAfiliasi tidak diketahui1
Achmad Erlangga Bintang SamodraAfiliasi tidak diketahui1
Iis Siti AisyahAfiliasi tidak diketahui1
Gunawan RefiadiAfiliasi tidak diketahui1
Sri NugrohoAfiliasi tidak diketahui1
Thesar Aditya NurcholisAfiliasi tidak diketahui1
Ahmad KholilAfiliasi tidak diketahui1
Riyadi RiyadiAfiliasi tidak diketahui1
Ari SetiawanAfiliasi tidak diketahui1
Siska Titik DwiyatiAfiliasi tidak diketahui1
Danang Budi PratamaAfiliasi tidak diketahui1
Eko Arif SyaefudinAfiliasi tidak diketahui1
Rahmat Doni WidodoAfiliasi tidak diketahui1
Rahmadi YotenkaIslamic University of Indonesia1
Muhammad KhafidhAfiliasi tidak diketahui1
Finny Pratama PuteraAfiliasi tidak diketahui1
Nur Hidayah IsmailAfiliasi tidak diketahui1
Djoko Wahyu KarmiadjiBadan Pengkajian dan Penerapan Teknologi1
Muchamad GozaliAfiliasi tidak diketahui1
Budi HaryantoAfiliasi tidak diketahui1
Muhamad MasrurAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">The Development of Exhaust Fan Housing With Ceiling Mounting For High Rise Buildings by Using  DFMA </dc:title>
	<dc:creator xml:lang="en">Suwandi, Agri</dc:creator>
	<dc:creator xml:lang="en">Rachmawanto, Muhammad Pillar</dc:creator>
	<dc:creator xml:lang="en">Libyawati, Wina</dc:creator>
	<dc:creator xml:lang="en">Siregar, Januar Parlaungan</dc:creator>
	<dc:subject xml:lang="en">DFMA</dc:subject>
	<dc:subject xml:lang="en">FE model</dc:subject>
	<dc:subject xml:lang="en">exhaust fan</dc:subject>
	<dc:subject xml:lang="en">manufacturing cost</dc:subject>
	<dc:subject xml:lang="en">total assembly</dc:subject>
	<dc:description xml:lang="en">Design for manufacturing and assembly (DFMA) is widely applied in many industries to optimize the manufacturing and assembly process at the early stage of design, with the aides of the CAD model. Many researchers apply the DFMA to increase assembly efficiency, by decreasing the number of parts from a product, decreasing the manufacturing cost, and reducing assembly time. Therefore, this research applies DFMA to develop exhaust fan housing with ceiling mounting for high rise building type with the same purpose, and at the same time to justify that the method can overcome the problem of assembly time in a production line. Both designs from before and after the application of DFMA, are being compared by using finite element simulation and experimental. The simulation employs stress analysis, to predict the strength of those designs. While the experimental uses a manufacturing cost survey, real assembly time survey and failure test to show the advantages of DFMA design results. The research result shows that the DFMA method can decrease the manufacturing cost by 0.44%, and the assembly time by up to 2%, and able to withstand the entire mass of the ceiling mounting fan.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2023-06-05</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/1675</dc:identifier>
	<dc:identifier>10.37385/jaets.v4i2.1675</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 4 No. 2 (2023): Journal of Applied Engineering and Technological Science (JAETS); 895-907</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v4i2</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/1675/1314</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>