Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effectiveness Analysis of Hydraulic Torque Wrench Machine Using Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis Study Case on Heavy Equipment Manufacturing

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 5 No. 1 (2023) · hlm. 474–494

DOI
10.37385/jaets.v5i1.1920
ISSN
2715-6079, 2715-6087
Terbit
2023-12-10
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Production quality in terms of process efficiency and quality in the manufacturing industry must always be improved in order to maintain customer confidence. PT XYZ as a heavy equipment assembly company is one of the companies that depends on process reliability for a smooth production process. Based on this, the problems raised in this study focus on increasing the efficiency of the process of installing bolts on slew bearings. By using Overall Equipment Efficiency (OEE) and Process Capability (CpK) as the main benchmarks for measuring the quality of the production process where the latest data shows the average OEE value is at 18.53%, while the CpK value for the bolt tightening process is at 0,67. The OEE and CpK figures obtained show that the process quality is still not optimal and needs to be improved. The purpose of this research is to identify and prevent as many factors as possible that can lead to process failure. The methods used to evaluate processes and to identify where and how a process might fail are Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis (LTA). Both methods are used to identify and prevent as many factors as possible that can lead to a process failure. The results of research using the FMEA and LTA methods show that in the process of installing slew bearing bolts there is a process that needs to be improved because the RPN value is quite high, namely above 125. Some suggestions for improvement such as the use of a manipulator arm on a torque tool and the implementation of a manufacturing execution system (MES) can reduce the RPN value from above 125 to 28, where the process obtained is better than before.

Kata kunci

Jaringan kolaborasi para penulis

11 penulis · 23 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Binus University
  • University of Malaya
  • State University of Medan
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Noor Hasnah MoinUniversity of Malaya1
Fajar KurniawanUniversity of Malaya1
Siti Nurmaya MusaUniversity of Malaya1
Mohammad Alfin KarimBinus University1
Ruben Cornelius SiagianState University of Medan1
Lulut AlfarisAfiliasi tidak diketahui1
Anas Noor FirdausAfiliasi tidak diketahui1
Ukta Indra NyuswantoroAfiliasi tidak diketahui1
Andri WahyudiAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Effectiveness Analysis of Hydraulic Torque Wrench Machine Using Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis Study Case on Heavy Equipment Manufacturing</dc:title>
	<dc:creator xml:lang="en">Prihananto, Dhadung</dc:creator>
	<dc:creator xml:lang="en">Sahroni, Taufik Roni</dc:creator>
	<dc:subject xml:lang="en">Process Capability</dc:subject>
	<dc:subject xml:lang="en">Overall Equipment Effectiveness</dc:subject>
	<dc:subject xml:lang="en">FMEA</dc:subject>
	<dc:subject xml:lang="en">Manufacturing</dc:subject>
	<dc:subject xml:lang="en">Production Engineering</dc:subject>
	<dc:description xml:lang="en">Production quality in terms of process efficiency and quality in the manufacturing industry must always be improved in order to maintain customer confidence. PT XYZ as a heavy equipment assembly company is one of the companies that depends on process reliability for a smooth production process. Based on this, the problems raised in this study focus on increasing the efficiency of the process of installing bolts on slew bearings. By using Overall Equipment Efficiency (OEE) and Process Capability (CpK) as the main benchmarks for measuring the quality of the production process where the latest data shows the average OEE value is at 18.53%, while the CpK value for the bolt tightening process is at 0 ,67. The OEE and CpK figures obtained show that the process quality is still not optimal and needs to be improved. The purpose of this research is to identify and prevent as many factors as possible that can lead to process failure. The methods used to evaluate processes and to identify where and how a process might fail are Failure Mode and Effect Analysis (FMEA) and Logic Tree Analysis (LTA). Both methods are used to identify and prevent as many factors as possible that can lead to a process failure. The results of research using the FMEA and LTA methods show that in the process of installing slew bearing bolts there is a process that needs to be improved because the RPN value is quite high, namely above 125. Some suggestions for improvement such as the use of a manipulator arm on a torque tool and the implementation of a manufacturing execution system (MES) can reduce the RPN value from above 125 to 28, where the process obtained is better than before.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2023-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/1920</dc:identifier>
	<dc:identifier>10.37385/jaets.v5i1.1920</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 5 No. 1 (2023): Journal of Applied Engineering and Technological Science (JAETS); 474-494</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v5i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/1920/2130</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>