Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Performance Evaluation of Logistics Service Provider (LSP) in FMCG Companies Using Physical Distribution Service Quality (PDSQ) Dimension: Case Study

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 5 No. 1 (2023) · hlm. 101–111

DOI
10.37385/jaets.v5i1.1997
ISSN
2715-6079, 2715-6087
Terbit
2023-12-10
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

Increasingly fierce business competition requires companies to be able to meet customer desires on time, in the right amount and in the right quality. FMCG XXX Company is a skin care product manufacturing company that focuses on production activities. Therefore, the company transfers product distribution activities to customers (distributors) to Logistics Service Providers (LSP). FMCG XXX hold consumer’s satisfaction in the highest regard. Along with the increasing number of activities being diverted, FMCG XXX companies aim to evaluate LSP performance through appropriate indicators. The indicators evaluated in this study adopt dimensions in Physical Distribution Service Quality (PDSQ) which consist of three dimensions, namely timeliness, availability and condition. Based on the results of the study, 13 indicators were obtained that FMCG XXX Company used to evaluate LSP performance. In general, around 69% of LSP's actual performance has been able to meet the targets set by the company, where two indicators are able to exceed the target and seven indicators are in accordance with the target. However, the company still has to focus on four indicators that have negative deviations because the actual performance value is less than the target set by the company. Negative indicators come from the availability and condition dimensions. The company coordinates with LSP to design improvement projects in order to improve actual performance according to the company's targets.

Kata kunci

Jaringan kolaborasi para penulis

6 penulis · 9 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Yogyakarta
  • Institut Teknologi Adhi Tama Surabaya
  • Universitas Katolik Widya Mandala Surabaya
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Triyono TriyonoMuhammadiyah University of Yogyakarta2
Bambang Heri IsnawanMuhammadiyah University of Yogyakarta1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Performance Evaluation of Logistics Service Provider (LSP) in FMCG Companies Using Physical Distribution Service Quality (PDSQ) Dimension: Case Study </dc:title>
	<dc:creator xml:lang="en">Yuliawati, Evi</dc:creator>
	<dc:creator xml:lang="en"> Brilliana, Clora </dc:creator>
	<dc:creator xml:lang="en">Rahmawati, Nur </dc:creator>
	<dc:creator xml:lang="en">Trihastuti, Dian </dc:creator>
	<dc:subject xml:lang="en">FMCG</dc:subject>
	<dc:subject xml:lang="en">Performance</dc:subject>
	<dc:subject xml:lang="en">LSP</dc:subject>
	<dc:subject xml:lang="en">PDSQ</dc:subject>
	<dc:description xml:lang="en">Increasingly fierce business competition requires companies to be able to meet customer desires on time, in the right amount and in the right quality. FMCG XXX Company is a skin care product manufacturing company that focuses on production activities. Therefore, the company transfers product distribution activities to customers (distributors) to Logistics Service Providers (LSP). FMCG XXX hold consumer’s satisfaction in the highest regard. Along with the increasing number of activities being diverted, FMCG XXX companies aim to evaluate LSP performance through appropriate indicators. The indicators evaluated in this study adopt dimensions in Physical Distribution Service Quality (PDSQ) which consist of three dimensions, namely timeliness, availability and condition. Based on the results of the study, 13 indicators were obtained that FMCG XXX Company used to evaluate LSP performance. In general, around 69% of LSP's actual performance has been able to meet the targets set by the company, where two indicators are able to exceed the target and seven indicators are in accordance with the target. However, the company still has to focus on four indicators that have negative deviations because the actual performance value is less than the target set by the company. Negative indicators come from the availability and condition dimensions. The company coordinates with LSP to design improvement projects in order to improve actual performance according to the company's targets.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2023-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/1997</dc:identifier>
	<dc:identifier>10.37385/jaets.v5i1.1997</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 5 No. 1 (2023): Journal of Applied Engineering and Technological Science (JAETS); 101-111</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v5i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/1997/2081</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>