Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Application of E-Glass Jute Hybrid Laminate Composite with Curved Shape on Compressive Strength of Cylindrical Column Concrete

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 5 No. 1 (2023) · hlm. 184–196

DOI
10.37385/jaets.v5i1.2072
ISSN
2715-6079, 2715-6087
Terbit
2023-12-10
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

This study provides a better understanding of reinforcing cylindrical concrete columns (CCC) using a hybrid laminated composite material (HLC) composed of jute and e-glass fibers, including the influence of layer quantity on strength and a comparison with previous research. The utilization of these alternative materials may lead to the development of novel and efficient solutions for constructing durable and robust structures. The primary objectives of this research are to assess the effects of employing HLC as a reinforcing layer on CCC compressive strength, optimize the reinforcement process by selecting appropriate layer sequences and types, and analyze the type of fiber damage in relation to the strength of HLC composite material. The materials utilized in this study encompass woven jute fabric sheets, e-glass fiber sheets, and epoxy resin. Compressive strength testing was conducted following ASTM C39 standards. Specimen variations were based on the number and type of reinforcing layers. The results revealed that CCC compressive strength increased by up to 100% with the application of up to three layers of jute compared to an unlayered specimen. Furthermore, CCC compressive strength experienced a remarkable enhancement of up to 150% with the incorporation of HLC composite. Hence, the implementation of HLC demonstrates significant potential for augmenting the strength of concrete structures.

Kata kunci

Jaringan kolaborasi para penulis

18 penulis · 47 tautan kepenulisan bersama · 24 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Medan Area University
  • Universitas Sumatera Utara
  • Universiti Teknikal Malaysia Melaka
  • Andalas University
  • Universitas Syiah Kuala
  • Universiti Brunei Darussalam
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Marischa ElvenyUniversitas Sumatera Utara3
Mahyuddin K. M. NasutionUniversitas Sumatera Utara2
Habib SatriaMedan Area University2
Syafii SyafiiAndalas University2
Marwan RamliUniversitas Syiah Kuala1
Sayuti RahmanMedan Area University1
Muhammad ZarlisUniversitas Sumatera Utara1
Syahril EfendiUniversitas Sumatera Utara1
Rizki MulionoMedan Area University1
Muhammad Akbar SiregarMedan Area University1
Nukhe Andri SilvianaMedan Area University1
Indri DayanaMedan Area University1
Dian NoviandriMedan Area University1
Muhammad Khahfi ZuhandaMedan Area University1
Rudi SalamUniversiti Brunei Darussalam1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Application of E-Glass Jute Hybrid Laminate Composite with Curved Shape on Compressive Strength of Cylindrical Column Concrete</dc:title>
	<dc:creator xml:lang="en">Zulfikar, Achmad Jusuf</dc:creator>
	<dc:creator xml:lang="en">Yaakob, Mohd Yuhazri</dc:creator>
	<dc:creator xml:lang="en">Syah, Rahmad Bayu</dc:creator>
	<dc:subject xml:lang="en">Woven Jute Fabric</dc:subject>
	<dc:subject xml:lang="en">Curve Laminate Composite</dc:subject>
	<dc:subject xml:lang="en">Hybrid Laminate Composite</dc:subject>
	<dc:subject xml:lang="en">Compression Strength</dc:subject>
	<dc:description xml:lang="en">This study provides a better understanding of reinforcing cylindrical concrete columns (CCC) using a hybrid laminated composite material (HLC) composed of jute and e-glass fibers, including the influence of layer quantity on strength and a comparison with previous research. The utilization of these alternative materials may lead to the development of novel and efficient solutions for constructing durable and robust structures. The primary objectives of this research are to assess the effects of employing HLC as a reinforcing layer on CCC compressive strength, optimize the reinforcement process by selecting appropriate layer sequences and types, and analyze the type of fiber damage in relation to the strength of HLC composite material. The materials utilized in this study encompass woven jute fabric sheets, e-glass fiber sheets, and epoxy resin. Compressive strength testing was conducted following ASTM C39 standards. Specimen variations were based on the number and type of reinforcing layers. The results revealed that CCC compressive strength increased by up to 100% with the application of up to three layers of jute compared to an unlayered specimen. Furthermore, CCC compressive strength experienced a remarkable enhancement of up to 150% with the incorporation of HLC composite. Hence, the implementation of HLC demonstrates significant potential for augmenting the strength of concrete structures.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2023-12-10</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/2072</dc:identifier>
	<dc:identifier>10.37385/jaets.v5i1.2072</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 5 No. 1 (2023): Journal of Applied Engineering and Technological Science (JAETS); 184-196</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v5i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/2072/2091</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2023 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>