Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Optimizing Low-Pressure Die Casting of A356 Aluminum Alloy Wheel Rims: A Novel Side Core With Integrated Cooling System

Journal of Applied Engineering and Technological Science (JAETS) · Vol. 6 No. 1 (2024) · hlm. 281–299

DOI
10.37385/jaets.v6i1.5122
ISSN
2715-6079, 2715-6087
Terbit
2024-12-15
Penerbit
Yayasan Riset dan Pengembangan Intelektual (YRPI)
Bahasa
en

Abstrak

This study explores the development of a novel side core design with an integrated cooling system for the low-pressure die casting (LPDC) of A356 aluminum alloy wheel rims in Indonesia. The objective is to reduce cycle time and minimize casting defects. The methodology involves 3D modeling using SolidWorks and simulations performed with MAGMAsoft to evaluate filling and solidification behavior, air pressure, and air entrapment. Notably, this is the first application of a cooling system in Side cores within the Indonesian automotive industry, motivated by the need to improve production efficiency and product quality, as current manufacturing processes suffer from long cycle times and high defect rates. Simulation results show a significant reduction in cycle time by 72 seconds, improving both efficiency and product quality. This study demonstrates the effectiveness of integrating cooling systems into side cores to enhance the LPDC process.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 45 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Manufaktur Bandung
  • Telkom University
  • National Research and Innovation Agency
  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dini HadianiPoliteknik Manufaktur Bandung2
Herman Budi HarjaAfiliasi tidak diketahui1
Yogi Muldani HendrawanAfiliasi tidak diketahui1
Rizka Savitri K.D.Afiliasi tidak diketahui1
Yunita Nugrahaini SafrudinTelkom University1
Rofan Yulian RomansyahPoliteknik Manufaktur Bandung1
Yuliar Yasin ErlanggaPoliteknik Manufaktur Bandung1
Muhammad Rizki Gorbyandi NadiPoliteknik Manufaktur Bandung1
Eko KoswaraNational Research and Innovation Agency1
Ari SiswantoAfiliasi tidak diketahui1
Nia Nuryanti PermataPoliteknik Manufaktur Bandung1
Achmad MuhammadPoliteknik Manufaktur Bandung1
Supriyadi SadikinDiponegoro University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journal.yrpipku.com/index.php/jaets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Optimizing Low-Pressure Die Casting of A356 Aluminum Alloy Wheel Rims: A Novel Side Core With Integrated Cooling System </dc:title>
	<dc:creator xml:lang="en">Kusnowo, Roni</dc:creator>
	<dc:creator xml:lang="en">Budiarto, Hanif Azis</dc:creator>
	<dc:creator xml:lang="en">Ruskandi, Cecep</dc:creator>
	<dc:creator xml:lang="en">Gunara, Sophiadi</dc:creator>
	<dc:creator xml:lang="en">Hidayat, Ery</dc:creator>
	<dc:creator xml:lang="en">Nahrowi, Muhammad</dc:creator>
	<dc:creator xml:lang="en">Ariyani, Emma Dwi</dc:creator>
	<dc:subject xml:lang="en">Side core</dc:subject>
	<dc:subject xml:lang="en">LPDC</dc:subject>
	<dc:subject xml:lang="en">Cooling system</dc:subject>
	<dc:subject xml:lang="en">A356</dc:subject>
	<dc:subject xml:lang="en">Wheel</dc:subject>
	<dc:subject xml:lang="en">Magmasoft</dc:subject>
	<dc:description xml:lang="en">This study explores the development of a novel side core design with an integrated cooling system for the low-pressure die casting (LPDC) of A356 aluminum alloy wheel rims in Indonesia. The objective is to reduce cycle time and minimize casting defects. The methodology involves 3D modeling using SolidWorks and simulations performed with MAGMAsoft to evaluate filling and solidification behavior, air pressure, and air entrapment. Notably, this is the first application of a cooling system in Side cores within the Indonesian automotive industry, motivated by the need to improve production efficiency and product quality, as current manufacturing processes suffer from long cycle times and high defect rates. Simulation results show a significant reduction in cycle time by 72 seconds, improving both efficiency and product quality. This study demonstrates the effectiveness of integrating cooling systems into side cores to enhance the LPDC process.</dc:description>
	<dc:publisher xml:lang="en">Yayasan Riset dan Pengembangan Intelektual (YRPI)</dc:publisher>
	<dc:date>2024-12-15</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journal.yrpipku.com/index.php/jaets/article/view/5122</dc:identifier>
	<dc:identifier>10.37385/jaets.v6i1.5122</dc:identifier>
	<dc:source xml:lang="en">Journal of Applied Engineering and Technological Science (JAETS); Vol. 6 No. 1 (2024): Journal of Applied Engineering and Technological Science (JAETS); 281-299</dc:source>
	<dc:source>2715-6079</dc:source>
	<dc:source>2715-6087</dc:source>
	<dc:source>10.37385/jaets.v6i1</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://journal.yrpipku.com/index.php/jaets/article/view/5122/3691</dc:relation>
	<dc:rights xml:lang="en">Copyright (c) 2024 Journal of Applied Engineering and Technological Science (JAETS)</dc:rights>
</oai_dc:dc>