Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Disposal slope design based on low-plasticity rock’s shear strength in coal mining activities

Journal of Degraded and Mining Lands Management · Vol. 10 No. 1 (2022) · hlm. 3821–3827

DOI
10.15243/jdmlm.2022.101.3821
ISSN
2502-2458, 2339-076X
Terbit
2022-10-01
Penerbit
Brawijaya University
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Slope stability is the primary factor in designing a stable slope. The strength of the disposal slope relies on the characteristic of the dump materials. The rock shear strength denotes rock ability to withstand the burden, both constant and dynamic load. The weakest material used as a reference in designing the disposal slope is siltstone in Pulaubalang formation (location-04). The safety value in Location 04 and 02 tend to drop quickly as the inclination increase, while the safety in location 01 and 03 tend to fall slowly. This indicates that rocks with a lower plasticity index tend to be stronger in steeper slope conditions. The slope geometry was designed to be 10, 15, 20, and 25 meters high with a slope angle of 10o, 15o, 20o, 25o, 30o, 35o, 40o, 45o, 50o, 55o, and 60o. The slope geometry is considered stable and safe. However, this study suggests that the most effective slope design is the slope with 25 meters high, overall slope of 25,3o; the single slope of 35o; berm width 4,66 meters, bench height of 5 meters, with the safety factor value of 4.30 (SF= 4.30).

Kata kunci

Jaringan kolaborasi para penulis

9 penulis · 17 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Mulawarman University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Laurensius Pian PasiakanAfiliasi tidak diketahui1
Dita AmaliaAfiliasi tidak diketahui1
Muhammad Amin SyamMulawarman University1
Heryanto HeryantoMulawarman University1
Edhi SarwonoMulawarman University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://jdmlm.ub.ac.id/index.php/jdmlm/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Disposal slope design based on low-plasticity rock’s shear strength in coal mining activities</dc:title>
	<dc:creator>Hasan, Harjuni</dc:creator>
	<dc:creator>Oktaviani, Revia</dc:creator>
	<dc:creator>Trides, Tommy</dc:creator>
	<dc:creator>Sinaga, Dionisyus Fransiskus</dc:creator>
	<dc:subject xml:lang="en-US">disposal</dc:subject>
	<dc:subject xml:lang="en-US">rock characteristic</dc:subject>
	<dc:subject xml:lang="en-US">slope design</dc:subject>
	<dc:subject xml:lang="en-US">slope stability</dc:subject>
	<dc:description xml:lang="en-US">Slope stability is the primary factor in designing a stable slope. The strength of the disposal slope relies on the characteristic of the dump materials. The rock shear strength denotes rock ability to withstand the burden, both constant and dynamic load. The weakest material used as a reference in designing the disposal slope is siltstone in Pulaubalang formation (location-04). The safety value in Location 04 and 02 tend to drop quickly as the inclination increase, while the safety in location 01 and 03 tend to fall slowly. This indicates that rocks with a lower plasticity index tend to be stronger in steeper slope conditions. The slope geometry was designed to be 10, 15, 20, and 25 meters high with a slope angle of 10o, 15o, 20o, 25o, 30o, 35o, 40o, 45o, 50o, 55o, and 60o. The slope geometry is considered stable and safe. However, this study suggests that the most effective slope design is the slope with 25 meters high, overall slope of 25,3o; the single slope of 35o; berm width 4,66 meters, bench height of 5 meters, with the safety factor value of 4.30 (SF= 4.30).</dc:description>
	<dc:publisher xml:lang="en-US">Brawijaya University</dc:publisher>
	<dc:date>2022-10-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jdmlm.ub.ac.id/index.php/jdmlm/article/view/1271</dc:identifier>
	<dc:identifier>10.15243/jdmlm.2022.101.3821</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Degraded and Mining Lands Management; Vol. 10 No. 1 (2022); 3821-3827</dc:source>
	<dc:source>2502-2458</dc:source>
	<dc:source>2339-076X</dc:source>
	<dc:source>10.15243/jdmlm.2022.101</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jdmlm.ub.ac.id/index.php/jdmlm/article/view/1271/pdf</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Journal of Degraded and Mining Lands Management</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>