Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Experimental Study of an Aluminum-Polysilicon Thermopile for Implementation of Airflow Sensor on Silicon Chip

Journal of Engineering and Technological Sciences · Vol. 39 No. 2 (2013) · hlm. 98–108

DOI
10.5614/itbj.eng.sci.2007.39.2.2
ISSN
2338-5502, 2337-5779
Terbit
2013-09-13
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

A multi-directional airflow sensor has been realized. The essential part of the considered sensor is a thermopile configuration, which enables the measurement of flow speed and flow direction. The thermopile is a series arrangement of eight thermocouples. A thermocouple converts a difference in temperature into an electrical signal, by means of the Seebeck effect. The thermocouples are made of aluminum-N-type polysilicon junctions. The incoming flow is heated and the degree of heat transfer by convection to the flow, depends on the speed of the flow; the faster the flow the smaller the heat transfer, which leads to a smaller (Seebeck) output voltage of the thermopiles. After signal conditioning - i.e., filtering and amplification by means of an amplification system - the electrical output signals of the thermopiles are further signal-processed by applying analog-to-digital signal conversion, so that finally the flow speed and the flow direction can be properly displayed on a computer screen. The measured values of the Seebeck coefficient or thermopower (S) were in the range of: 0.43 to 0.68 mV/K which are in good agreement with the values found in the literature: 0.5 to 0.7 mV/K. Moreover, it was found that the flow speed Uï‚¥ is proportional to the reciprocal value of the square of the output voltage of the outgoing thermopile.

Jaringan kolaborasi para penulis

12 penulis · 29 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Politeknik Negeri Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Arwin Datumaya Wahyudi SumariPoliteknik Negeri Malang3
Sarwono SutiknoBandung Institute of Technology2
Yusuf KurniawanBandung Institute of Technology2
Jaka Persada SembiringBandung Institute of Technology1
Aciek Ida WuryandariAfiliasi tidak diketahui1
Farida Agustini WidjajatiAfiliasi tidak diketahui1
Septafiansyah Dwi PutraAfiliasi tidak diketahui1
Iping SuprianaBandung Institute of Technology1
Muhammad Sukrisno MardiyantoBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental Study of an Aluminum-Polysilicon Thermopile for Implementation of Airflow Sensor on Silicon Chip</dc:title>
	<dc:creator>Subandi, Ayub</dc:creator>
	<dc:creator>Idris, Irman</dc:creator>
	<dc:creator>Ahmad, Adang Suwandi</dc:creator>
	<dc:description xml:lang="en-US">A multi-directional airflow sensor has been realized. The essential part of  the  considered  sensor  is  a  thermopile  configuration,  which  enables  the measurement  of  flow  speed  and  flow  direction.  The  thermopile  is  a  series arrangement  of  eight  thermocouples.  A  thermocouple  converts  a  difference  in temperature  into  an  electrical  signal,  by  means  of  the  Seebeck  effect .  The thermocouples  are  made  of  aluminum-N-type  polysilicon  junctions.  The incoming  flow  is  heated  and  the  degree  of  heat  transfer  by  convection  to  the flow, depends on the speed of the flow; the faster the flow the smaller the heat transfer,  which leads to a smaller (Seebeck) output  voltage of  the thermopiles. After  signal  conditioning  -  i.e.,  filtering  and  amplification  by  means  of  an amplification system  -  the electrical output signals of the thermopiles are further signal-processed by applying analog-to-digital signal conversion, so that finally the flow speed and the flow direction can be properly displayed on a computer screen. The measured values of the Seebeck coefficient or thermopower (S) were in the range of: 0.43 to 0.68 mV/K which are in good agreement with the values found in the literature: 0.5 to 0.7 mV/K. Moreover, it  was found that the  flow speed  Uï‚¥ is  proportional  to  the  reciprocal  value  of  the  square  of  the  output voltage of the outgoing thermopile.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-09-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/19</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2007.39.2.2</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 39 No. 2 (2007); 98-108</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/19/16</dc:relation>
</oai_dc:dc>