Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Geometry Effect Investigation on a Conical Chamber with Porous Media Boundary Condition Using Computational Fluid Dynamic (CFD) Technique

Journal of Engineering and Technological Sciences · Vol. 41 No. 2 (2013) · hlm. 97–110

DOI
10.5614/itbj.eng.sci.2009.41.2.1
ISSN
2338-5502, 2337-5779
Terbit
2013-09-13
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

The present study is an attempt to introduce a method for optimizing the geometry of a unit process. The comprehensive unit process performances are generated by a CFD engine. The CFD engine can simulate the unit process performances at whatever conditions. Both design geometry and operating variables were used on the CFD simulation. The burden on a simplified process was taken out from CFD simulation. A complex geometry of a unit process is represented by a secondary reformer. A secondary reformer has a conical chamber as a space to undergo a combustion reaction before entering a catalyst bed. This complexity is added by the boundary on a porous solid surface as the top surface of the catalyst bed. The conical angle affects the flow pattern inside the conical chamber having a porous solid surface as its base. The conical angle above 65° results the disappearing of the recirculation flow. The inlet distance from the porous solid surface also can exhibit different characteristics of recirculation flow. The closer the distance to the porous solid surface, the stronger the recirculation is. The inlet velocity values have no significant effect on the flow pattern. The introduction of a solid volume inside the geometry creates distortion in the flow pattern. In the application, the inserted solid volume is equivalent to a burner. It means that the use of the burner inherently produces some problems of the flow distribution.

Jaringan kolaborasi para penulis

40 penulis · 118 tautan kepenulisan bersama · 62 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • Sultan Ageng Tirtayasa University
  • Pertamina (Indonesia)
  • IPB University
  • Diponegoro University
  • Institut Teknologi Sepuluh Nopember
  • Sumatera Institute of Technology
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Yogi Wibisono BudhiBandung Institute of Technology5
Anton IrawanSultan Ageng Tirtayasa University3
Subagjo SubagjoBandung Institute of Technology3
Mohammad EffendyBandung Institute of Technology3
Hafid AlwanSultan Ageng Tirtayasa University2
Teguh KurniawanSultan Ageng Tirtayasa University2
Tjokorde Walmiki SamadhiBandung Institute of Technology2
Elfa Susanti ThamrinSumatera Institute of Technology1
Endang WarsikiIPB University1
Ono SuparnoIPB University1
Asep Bayu Dani NandiyantoIndonesia University of Education1
Darisman DarismanSultan Ageng Tirtayasa University1
Dina PujiantiSultan Ageng Tirtayasa University1
Muhammad Saifullah Abu BakarUniversiti Brunei Darussalam1
Aprilina PurbasariDiponegoro University1
IGBN MakertiharthaAfiliasi tidak diketahui1
Luqman BuchoriDiponegoro University1
Muhammad Dani SupardanUniversitas Syiah Kuala1
N. A. SutrisniningrumBandung Institute of Technology1
D. SantianiBandung Institute of Technology1
Renanto RenantoAfiliasi tidak diketahui1
Wahono SumaryonoBadan Pengkajian dan Penerapan Teknologi1
Achmad RoesyadiInstitut Teknologi Sepuluh Nopember1
Semuel Pati SendaInstitut Teknologi Sepuluh Nopember1
Vita WonoputriBandung Institute of Technology1
Abdullah Nur AzizJenderal Soedirman University1
Yul Yunazwin NazaruddinBandung Institute of Technology1
Parsaulian Ishaya SiregarBandung Institute of Technology1
Pasymi PasymiBandung Institute of Technology1
Made Tri Ari Penia KresnowatiBandung Institute of Technology1
Fathya RahminaBandung Institute of Technology1
Elvi RestiawatyBandung Institute of Technology1
Soen StevenBandung Institute of Technology1
Septhian MarnoPertamina (Indonesia)1
Oki MurazaPertamina (Indonesia)1
Jenny RizkianaBandung Institute of Technology1
Pandit HernowoInstitut Sains dan Teknologi Al-Kamal1
Carolus Borromeus RasrendraBandung Institute of Technology1
Yana MelianaPertamina (Indonesia)1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Geometry Effect Investigation  on a Conical Chamber with Porous Media Boundary Condition Using Computational Fluid Dynamic (CFD) Technique</dc:title>
	<dc:creator>Bindar, Yazid</dc:creator>
	<dc:description xml:lang="en-US">The present study is an attempt to introduce  a  method for optimizing the  geometry  of  a  unit  process.  The  comprehensive  unit  process  performances are generated by a  CFD engine. The CFD engine can simulate the unit process performances  at  whatever  conditions.  Both  design  geometry  and  operating variables were used on the CFD simulation. The burden on a simplified process was taken out from CFD simulation. A complex geometry of a unit process is represented  by  a  secondary  reformer.  A  secondary  reformer  has  a  conical chamber  as a space to undergo  a  combustion reaction before entering  a  catalyst bed. This complexity is added by the boundary  on a  porous solid surface as the top surface of  the catalyst bed. The  conical  angle affects the flow pattern inside the  conical chamber  having a porous solid surface as its  base. The  conical  angle above  65° results  the  disappearing  of  the recirculation  flow.  The  inlet  distance from  the  porous  solid  surface  also  can  exhibit  different  characteristics  of recirculation  flow.  The  closer  the  distance  to  the  porous  solid  surface,  the stronger the recirculation is. The inlet velocity values have no significant effect on  the  flow  pattern.  The  introduction  of  a  solid  volume  inside  the  geometry creates distortion in the flow pattern. In the application, the inserted solid volume is equivalent to a burner. It means that the use of the burner inherently produces some problems of the flow distribution.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-09-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/119</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2009.41.2.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 41 No. 2 (2009); 97-110</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/119/115</dc:relation>
</oai_dc:dc>