Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Combination of Minimum-Maximum (m-m) Attribute and Zero-INTENS-Difference (z-i-d) Attribute for Estimating Seismically Thin-Bed Thickness

Journal of Engineering and Technological Sciences · Vol. 43 No. 2 (2013) · hlm. 79–100

DOI
10.5614/itbj.eng.sci.2011.43.2.1
ISSN
2338-5502, 2337-5779
Terbit
2013-09-13
Penerbit
Directorate for Research and Community Services, Institut Teknologi Bandung
Bahasa
eng

Abstrak

This paper demonstrates a new alternative way in estimating seismically thin-bed (below-tuning) thickness. Initial thickness is built by bandpass filtering the amplitude display of a zero-phase seismic. The filter removes the non minimum and or non maximum and left the maximum and or the minimum of seismic amplitude. The unresolved below-tuning thickness is then corrected by zero-INTENS-difference (z-i-d) attribute. INTENS is integrated energy spectra, an attribute which can be derived from spectral analysis. z-i-d attribute is zero difference of INTENS between the seismic and its synthetic. The method generates INTENS difference profile by subtracting seismic INTENS and its synthetic INTENS iteratively. The iteration is controlled by dipole space shifting from distance to closer or vice versa. The true thickness is derived by locating z-i-d which laid in INTENS different profile. It has found that, for free noise true seismic and perfect-wavelet (a wavelet which only approximately similar with wavelet which constructing the true seismic) synthetic seismic, in INTENS different profile, the z-i-d location always corresponds to true dipole space or thickness. The method could resolve all thickness of a wedge-modeled seismic with three different dominant frequencies. When the synthetic seismic is constructed with imperfect wavelet, slightly different analysis is needed to locate z-i-d attribute and the result is not as perfect as when perfect wavelet constructing synthetic seismic. A quiet similar result is got when the method is implemented for noisy wedge-modeled seismic. Bad thickness estimation is resulted for 20% noise seismic. The method algorithm is extended for similar dipole polarity model and multilayer model to bring the method to real seismic data nearer. The extension is done by estimating thickness of every layer of a stacked-wedge-modeled seismic. The algorithm then generalized for estimating layers thickness with several thickness combinations. The method was able to delineate shallow channel of Stratton Field by providing good pseudo-acousticimpedance (pseudo AI) map.

Jaringan kolaborasi para penulis

3 penulis · 2 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknologi Petronas
  • Petronas (Malaysia)
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Deva GhoshPetronas (Malaysia)1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://journals.itb.ac.id/index.php/jets/oai, pertama di-harvest 9 Nov 2026, terakhir terlihat 9 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Combination of Minimum-Maximum (m-m) Attribute and Zero-INTENS-Difference (z-i-d) Attribute for Estimating Seismically Thin-Bed Thickness</dc:title>
	<dc:creator>Purnomo, Eko Widi</dc:creator>
	<dc:creator>Harith, Zuhar Zahir Tuan</dc:creator>
	<dc:description xml:lang="en-US">This  paper  demonstrates  a  new  alternative  way  in  estimating seismically thin-bed (below-tuning) thickness. Initial thickness is built by bandpass filtering the amplitude display of a zero-phase seismic. The filter removes the  non  minimum  and  or  non  maximum  and  left  the  maximum  and  or  the minimum of seismic amplitude. The unresolved below-tuning thickness is then corrected  by  zero-INTENS-difference  (z-i-d)  attribute.  INTENS  is  integrated energy  spectra,  an  attribute  which  can  be  derived  from  spectral  analysis.  z-i-d attribute is zero difference of INTENS between the seismic and its synthetic. The method  generates  INTENS  difference  profile  by  subtracting  seismic  INTENS and its synthetic INTENS iteratively. The iteration is controlled by dipole space shifting from  distance to closer or  vice  versa.  The true thickness is derived  by locating z-i-d which laid in INTENS different profile. It has found that, for free noise  true  seismic  and  perfect-wavelet  (a  wavelet  which  only  approximately similar  with  wavelet  which  constructing  the  true  seismic)  synthetic  seismic,  in INTENS  different  profile,  the  z-i-d  location  always  corresponds  to  true  dipole space or thickness. The method could resolve all thickness of a wedge-modeled seismic with three different dominant frequencies. When the synthetic seismic is constructed with imperfect wavelet, slightly different analysis is needed to locate z-i-d  attribute  and  the  result  is  not  as  perfect  as  when  perfect  wavelet constructing synthetic seismic. A quiet similar result is got when the method is implemented  for  noisy  wedge-modeled  seismic.  Bad  thickness  estimation  is resulted  for  20%  noise  seismic.  The  method  algorithm  is  extended  for  similar dipole polarity model and multilayer model to bring the method to real seismic data  nearer.  The  extension  is  done  by  estimating  thickness  of  every  layer  of  a stacked-wedge-modeled  seismic. The algorithm then generalized for estimating layers  thickness  with  several  thickness  combinations.  The  method  was  able  to delineate shallow channel of Stratton Field by providing good pseudo-acousticimpedance (pseudo AI) map.</dc:description>
	<dc:publisher xml:lang="en-US">Directorate for Research and Community Services, Institut Teknologi Bandung</dc:publisher>
	<dc:date>2013-09-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://journals.itb.ac.id/index.php/jets/article/view/144</dc:identifier>
	<dc:identifier>10.5614/itbj.eng.sci.2011.43.2.1</dc:identifier>
	<dc:source xml:lang="en-US">Journal of Engineering and Technological Sciences; Vol. 43 No. 2 (2011); 79-100</dc:source>
	<dc:source>2338-5502</dc:source>
	<dc:source>2337-5779</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://journals.itb.ac.id/index.php/jets/article/view/144/139</dc:relation>
</oai_dc:dc>